From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: Jeff Garzik <jgarzik@redhat.com>
Cc: linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 10/12] ahci: Move PCI code into ahci_pci.c
Date: Tue, 2 Mar 2010 21:29:41 +0300 [thread overview]
Message-ID: <20100302182941.GJ3445@oksana.dev.rtsoft.ru> (raw)
In-Reply-To: <20100302182850.GA32057@oksana.dev.rtsoft.ru>
This patch should contain no functional changes, just moves code
around.
Currently ahci.c and ahci_pci.c are built into a single module,
so there is no need for EXPORT_SYMBOL_GPL()s, yet. Exports will be
added in a subsequent patch.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
drivers/ata/Kconfig | 8 +-
drivers/ata/Makefile | 3 +-
drivers/ata/ahci.c | 1426 +-----------------------------------------------
drivers/ata/ahci.h | 277 ++++++++++
drivers/ata/ahci_pci.c | 1175 +++++++++++++++++++++++++++++++++++++++
5 files changed, 1484 insertions(+), 1405 deletions(-)
create mode 100644 drivers/ata/ahci.h
create mode 100644 drivers/ata/ahci_pci.c
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index b17c57f..4656782 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -49,12 +49,18 @@ config SATA_PMP
config SATA_AHCI
tristate "AHCI SATA support"
- depends on PCI
help
This option enables support for AHCI Serial ATA.
If unsure, say N.
+config SATA_AHCI_PCI
+ tristate "PCI AHCI SATA support"
+ depends on SATA_AHCI && PCI
+ default y
+ help
+ This option enables support for PCI AHCI Serial ATA controllers.
+
config SATA_SIL24
tristate "Silicon Image 3124/3132 SATA support"
depends on PCI
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index b7d4923..0ab4c52 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -1,7 +1,8 @@
obj-$(CONFIG_ATA) += libata.o
-obj-$(CONFIG_SATA_AHCI) += ahci.o
+ahci-pci-objs += ahci.o ahci_pci.o
+obj-$(CONFIG_SATA_AHCI_PCI) += ahci-pci.o
obj-$(CONFIG_SATA_SVW) += sata_svw.o
obj-$(CONFIG_ATA_PIIX) += ata_piix.o
obj-$(CONFIG_SATA_PROMISE) += sata_promise.o
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 6694b17..ce08bc6 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -34,34 +34,19 @@
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/pci.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/device.h>
-#include <linux/dmi.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_cmnd.h>
#include <linux/libata.h>
-
-#define DRV_NAME "ahci"
-#define DRV_VERSION "3.0"
-
-/* Enclosure Management Control */
-#define EM_CTRL_MSG_TYPE 0x000f0000
-
-/* Enclosure Management LED Message Type */
-#define EM_MSG_LED_HBA_PORT 0x0000000f
-#define EM_MSG_LED_PMP_SLOT 0x0000ff00
-#define EM_MSG_LED_VALUE 0xffff0000
-#define EM_MSG_LED_VALUE_ACTIVITY 0x00070000
-#define EM_MSG_LED_VALUE_OFF 0xfff80000
-#define EM_MSG_LED_VALUE_ON 0x00010000
+#include "ahci.h"
static int ahci_skip_host_reset;
-static int ahci_ignore_sss;
+int ahci_ignore_sss;
module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444);
MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)");
@@ -78,240 +63,10 @@ static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
ssize_t size);
-enum {
- AHCI_PCI_BAR = 5,
- AHCI_MAX_PORTS = 32,
- AHCI_MAX_SG = 168, /* hardware max is 64K */
- AHCI_DMA_BOUNDARY = 0xffffffff,
- AHCI_MAX_CMDS = 32,
- AHCI_CMD_SZ = 32,
- AHCI_CMD_SLOT_SZ = AHCI_MAX_CMDS * AHCI_CMD_SZ,
- AHCI_RX_FIS_SZ = 256,
- AHCI_CMD_TBL_CDB = 0x40,
- AHCI_CMD_TBL_HDR_SZ = 0x80,
- AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16),
- AHCI_CMD_TBL_AR_SZ = AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS,
- AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ +
- AHCI_RX_FIS_SZ,
- AHCI_IRQ_ON_SG = (1 << 31),
- AHCI_CMD_ATAPI = (1 << 5),
- AHCI_CMD_WRITE = (1 << 6),
- AHCI_CMD_PREFETCH = (1 << 7),
- AHCI_CMD_RESET = (1 << 8),
- AHCI_CMD_CLR_BUSY = (1 << 10),
-
- RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */
- RX_FIS_SDB = 0x58, /* offset of SDB FIS data */
- RX_FIS_UNK = 0x60, /* offset of Unknown FIS data */
-
- board_ahci = 0,
- board_ahci_vt8251 = 1,
- board_ahci_ign_iferr = 2,
- board_ahci_sb600 = 3,
- board_ahci_mv = 4,
- board_ahci_sb700 = 5, /* for SB700 and SB800 */
- board_ahci_mcp65 = 6,
- board_ahci_nopmp = 7,
- board_ahci_yesncq = 8,
- board_ahci_nosntf = 9,
-
- /* global controller registers */
- HOST_CAP = 0x00, /* host capabilities */
- HOST_CTL = 0x04, /* global host control */
- HOST_IRQ_STAT = 0x08, /* interrupt status */
- HOST_PORTS_IMPL = 0x0c, /* bitmap of implemented ports */
- HOST_VERSION = 0x10, /* AHCI spec. version compliancy */
- HOST_EM_LOC = 0x1c, /* Enclosure Management location */
- HOST_EM_CTL = 0x20, /* Enclosure Management Control */
- HOST_CAP2 = 0x24, /* host capabilities, extended */
-
- /* HOST_CTL bits */
- HOST_RESET = (1 << 0), /* reset controller; self-clear */
- HOST_IRQ_EN = (1 << 1), /* global IRQ enable */
- HOST_AHCI_EN = (1 << 31), /* AHCI enabled */
-
- /* HOST_CAP bits */
- HOST_CAP_SXS = (1 << 5), /* Supports External SATA */
- HOST_CAP_EMS = (1 << 6), /* Enclosure Management support */
- HOST_CAP_CCC = (1 << 7), /* Command Completion Coalescing */
- HOST_CAP_PART = (1 << 13), /* Partial state capable */
- HOST_CAP_SSC = (1 << 14), /* Slumber state capable */
- HOST_CAP_PIO_MULTI = (1 << 15), /* PIO multiple DRQ support */
- HOST_CAP_FBS = (1 << 16), /* FIS-based switching support */
- HOST_CAP_PMP = (1 << 17), /* Port Multiplier support */
- HOST_CAP_ONLY = (1 << 18), /* Supports AHCI mode only */
- HOST_CAP_CLO = (1 << 24), /* Command List Override support */
- HOST_CAP_LED = (1 << 25), /* Supports activity LED */
- HOST_CAP_ALPM = (1 << 26), /* Aggressive Link PM support */
- HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */
- HOST_CAP_MPS = (1 << 28), /* Mechanical presence switch */
- HOST_CAP_SNTF = (1 << 29), /* SNotification register */
- HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */
- HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */
-
- /* HOST_CAP2 bits */
- HOST_CAP2_BOH = (1 << 0), /* BIOS/OS handoff supported */
- HOST_CAP2_NVMHCI = (1 << 1), /* NVMHCI supported */
- HOST_CAP2_APST = (1 << 2), /* Automatic partial to slumber */
-
- /* registers for each SATA port */
- PORT_LST_ADDR = 0x00, /* command list DMA addr */
- PORT_LST_ADDR_HI = 0x04, /* command list DMA addr hi */
- PORT_FIS_ADDR = 0x08, /* FIS rx buf addr */
- PORT_FIS_ADDR_HI = 0x0c, /* FIS rx buf addr hi */
- PORT_IRQ_STAT = 0x10, /* interrupt status */
- PORT_IRQ_MASK = 0x14, /* interrupt enable/disable mask */
- PORT_CMD = 0x18, /* port command */
- PORT_TFDATA = 0x20, /* taskfile data */
- PORT_SIG = 0x24, /* device TF signature */
- PORT_CMD_ISSUE = 0x38, /* command issue */
- PORT_SCR_STAT = 0x28, /* SATA phy register: SStatus */
- PORT_SCR_CTL = 0x2c, /* SATA phy register: SControl */
- PORT_SCR_ERR = 0x30, /* SATA phy register: SError */
- PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */
- PORT_SCR_NTF = 0x3c, /* SATA phy register: SNotification */
-
- /* PORT_IRQ_{STAT,MASK} bits */
- PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */
- PORT_IRQ_TF_ERR = (1 << 30), /* task file error */
- PORT_IRQ_HBUS_ERR = (1 << 29), /* host bus fatal error */
- PORT_IRQ_HBUS_DATA_ERR = (1 << 28), /* host bus data error */
- PORT_IRQ_IF_ERR = (1 << 27), /* interface fatal error */
- PORT_IRQ_IF_NONFATAL = (1 << 26), /* interface non-fatal error */
- PORT_IRQ_OVERFLOW = (1 << 24), /* xfer exhausted available S/G */
- PORT_IRQ_BAD_PMP = (1 << 23), /* incorrect port multiplier */
-
- PORT_IRQ_PHYRDY = (1 << 22), /* PhyRdy changed */
- PORT_IRQ_DEV_ILCK = (1 << 7), /* device interlock */
- PORT_IRQ_CONNECT = (1 << 6), /* port connect change status */
- PORT_IRQ_SG_DONE = (1 << 5), /* descriptor processed */
- PORT_IRQ_UNK_FIS = (1 << 4), /* unknown FIS rx'd */
- PORT_IRQ_SDB_FIS = (1 << 3), /* Set Device Bits FIS rx'd */
- PORT_IRQ_DMAS_FIS = (1 << 2), /* DMA Setup FIS rx'd */
- PORT_IRQ_PIOS_FIS = (1 << 1), /* PIO Setup FIS rx'd */
- PORT_IRQ_D2H_REG_FIS = (1 << 0), /* D2H Register FIS rx'd */
-
- PORT_IRQ_FREEZE = PORT_IRQ_HBUS_ERR |
- PORT_IRQ_IF_ERR |
- PORT_IRQ_CONNECT |
- PORT_IRQ_PHYRDY |
- PORT_IRQ_UNK_FIS |
- PORT_IRQ_BAD_PMP,
- PORT_IRQ_ERROR = PORT_IRQ_FREEZE |
- PORT_IRQ_TF_ERR |
- PORT_IRQ_HBUS_DATA_ERR,
- DEF_PORT_IRQ = PORT_IRQ_ERROR | PORT_IRQ_SG_DONE |
- PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS |
- PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS,
-
- /* PORT_CMD bits */
- PORT_CMD_ASP = (1 << 27), /* Aggressive Slumber/Partial */
- PORT_CMD_ALPE = (1 << 26), /* Aggressive Link PM enable */
- PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */
- PORT_CMD_PMP = (1 << 17), /* PMP attached */
- PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */
- PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */
- PORT_CMD_FIS_RX = (1 << 4), /* Enable FIS receive DMA engine */
- PORT_CMD_CLO = (1 << 3), /* Command list override */
- PORT_CMD_POWER_ON = (1 << 2), /* Power up device */
- PORT_CMD_SPIN_UP = (1 << 1), /* Spin up device */
- PORT_CMD_START = (1 << 0), /* Enable port DMA engine */
-
- PORT_CMD_ICC_MASK = (0xf << 28), /* i/f ICC state mask */
- PORT_CMD_ICC_ACTIVE = (0x1 << 28), /* Put i/f in active state */
- PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */
- PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */
-
- /* hpriv->flags bits */
- AHCI_HFLAG_NO_NCQ = (1 << 0),
- AHCI_HFLAG_IGN_IRQ_IF_ERR = (1 << 1), /* ignore IRQ_IF_ERR */
- AHCI_HFLAG_IGN_SERR_INTERNAL = (1 << 2), /* ignore SERR_INTERNAL */
- AHCI_HFLAG_32BIT_ONLY = (1 << 3), /* force 32bit */
- AHCI_HFLAG_MV_PATA = (1 << 4), /* PATA port */
- AHCI_HFLAG_NO_MSI = (1 << 5), /* no PCI MSI */
- AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */
- AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */
- AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */
- AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */
- AHCI_HFLAG_NO_SUSPEND = (1 << 10), /* don't suspend */
- AHCI_HFLAG_SRST_TOUT_IS_OFFLINE = (1 << 11), /* treat SRST timeout as
- link offline */
- AHCI_HFLAG_NO_SNTF = (1 << 12), /* no sntf */
-
- /* ap->flags bits */
-
- AHCI_FLAG_COMMON = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
- ATA_FLAG_ACPI_SATA | ATA_FLAG_AN |
- ATA_FLAG_IPM,
-
- ICH_MAP = 0x90, /* ICH MAP register */
-
- /* em constants */
- EM_MAX_SLOTS = 8,
- EM_MAX_RETRY = 5,
-
- /* em_ctl bits */
- EM_CTL_RST = (1 << 9), /* Reset */
- EM_CTL_TM = (1 << 8), /* Transmit Message */
- EM_CTL_ALHD = (1 << 26), /* Activity LED */
-};
-
-struct ahci_cmd_hdr {
- __le32 opts;
- __le32 status;
- __le32 tbl_addr;
- __le32 tbl_addr_hi;
- __le32 reserved[4];
-};
-struct ahci_sg {
- __le32 addr;
- __le32 addr_hi;
- __le32 reserved;
- __le32 flags_size;
-};
-
-struct ahci_em_priv {
- enum sw_activity blink_policy;
- struct timer_list timer;
- unsigned long saved_activity;
- unsigned long activity;
- unsigned long led_state;
-};
-
-struct ahci_host_priv {
- void __iomem * mmio; /* bus-independant mem map */
- unsigned int flags; /* AHCI_HFLAG_* */
- u32 cap; /* cap to use */
- u32 cap2; /* cap2 to use */
- u32 port_map; /* port map to use */
- u32 saved_cap; /* saved initial cap */
- u32 saved_cap2; /* saved initial cap2 */
- u32 saved_port_map; /* saved initial port_map */
- u32 em_loc; /* enclosure management location */
-};
-
-struct ahci_port_priv {
- struct ata_link *active_link;
- struct ahci_cmd_hdr *cmd_slot;
- dma_addr_t cmd_slot_dma;
- void *cmd_tbl;
- dma_addr_t cmd_tbl_dma;
- void *rx_fis;
- dma_addr_t rx_fis_dma;
- /* for NCQ spurious interrupt analysis */
- unsigned int ncq_saw_d2h:1;
- unsigned int ncq_saw_dmas:1;
- unsigned int ncq_saw_sdb:1;
- u32 intr_mask; /* interrupts to enable */
- /* enclosure management info per PM slot */
- struct ahci_em_priv em_priv[EM_MAX_SLOTS];
-};
static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
-static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc);
static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc);
static int ahci_port_start(struct ata_port *ap);
@@ -323,14 +78,8 @@ static void ahci_pmp_attach(struct ata_port *ap);
static void ahci_pmp_detach(struct ata_port *ap);
static int ahci_softreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
-static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline);
static int ahci_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
-static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline);
-static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline);
static void ahci_postreset(struct ata_link *link, unsigned int *class);
static void ahci_error_handler(struct ata_port *ap);
static void ahci_post_internal_cmd(struct ata_queued_cmd *qc);
@@ -340,8 +89,6 @@ static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
u32 opts);
#ifdef CONFIG_PM
static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg);
-static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
-static int ahci_pci_device_resume(struct pci_dev *pdev);
#endif
static ssize_t ahci_activity_show(struct ata_device *dev, char *buf);
static ssize_t ahci_activity_store(struct ata_device *dev,
@@ -379,7 +126,7 @@ static struct device_attribute *ahci_sdev_attrs[] = {
NULL
};
-static struct scsi_host_template ahci_sht = {
+struct scsi_host_template ahci_sht = {
ATA_NCQ_SHT(DRV_NAME),
.can_queue = AHCI_MAX_CMDS - 1,
.sg_tablesize = AHCI_MAX_SG,
@@ -388,7 +135,7 @@ static struct scsi_host_template ahci_sht = {
.sdev_attrs = ahci_sdev_attrs,
};
-static struct ata_port_operations ahci_ops = {
+struct ata_port_operations ahci_ops = {
.inherits = &sata_pmp_port_ops,
.qc_defer = sata_pmp_qc_defer_cmd_switch,
@@ -425,312 +172,12 @@ static struct ata_port_operations ahci_ops = {
.port_stop = ahci_port_stop,
};
-static struct ata_port_operations ahci_vt8251_ops = {
- .inherits = &ahci_ops,
- .hardreset = ahci_vt8251_hardreset,
-};
-
-static struct ata_port_operations ahci_p5wdh_ops = {
- .inherits = &ahci_ops,
- .hardreset = ahci_p5wdh_hardreset,
-};
-
-static struct ata_port_operations ahci_sb600_ops = {
- .inherits = &ahci_ops,
- .softreset = ahci_sb600_softreset,
- .pmp_softreset = ahci_sb600_softreset,
-};
-
-#define AHCI_HFLAGS(flags) .private_data = (void *)(flags)
-
-static const struct ata_port_info ahci_port_info[] = {
- [board_ahci] =
- {
- .flags = AHCI_FLAG_COMMON,
- .pio_mask = ATA_PIO4,
- .udma_mask = ATA_UDMA6,
- .port_ops = &ahci_ops,
- },
- [board_ahci_vt8251] =
- {
- AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_PMP),
- .flags = AHCI_FLAG_COMMON,
- .pio_mask = ATA_PIO4,
- .udma_mask = ATA_UDMA6,
- .port_ops = &ahci_vt8251_ops,
- },
- [board_ahci_ign_iferr] =
- {
- AHCI_HFLAGS (AHCI_HFLAG_IGN_IRQ_IF_ERR),
- .flags = AHCI_FLAG_COMMON,
- .pio_mask = ATA_PIO4,
- .udma_mask = ATA_UDMA6,
- .port_ops = &ahci_ops,
- },
- [board_ahci_sb600] =
- {
- AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL |
- AHCI_HFLAG_NO_MSI | AHCI_HFLAG_SECT255 |
- AHCI_HFLAG_32BIT_ONLY),
- .flags = AHCI_FLAG_COMMON,
- .pio_mask = ATA_PIO4,
- .udma_mask = ATA_UDMA6,
- .port_ops = &ahci_sb600_ops,
- },
- [board_ahci_mv] =
- {
- AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI |
- AHCI_HFLAG_MV_PATA | AHCI_HFLAG_NO_PMP),
- .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
- .pio_mask = ATA_PIO4,
- .udma_mask = ATA_UDMA6,
- .port_ops = &ahci_ops,
- },
- [board_ahci_sb700] = /* for SB700 and SB800 */
- {
- AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL),
- .flags = AHCI_FLAG_COMMON,
- .pio_mask = ATA_PIO4,
- .udma_mask = ATA_UDMA6,
- .port_ops = &ahci_sb600_ops,
- },
- [board_ahci_mcp65] =
- {
- AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ),
- .flags = AHCI_FLAG_COMMON,
- .pio_mask = ATA_PIO4,
- .udma_mask = ATA_UDMA6,
- .port_ops = &ahci_ops,
- },
- [board_ahci_nopmp] =
- {
- AHCI_HFLAGS (AHCI_HFLAG_NO_PMP),
- .flags = AHCI_FLAG_COMMON,
- .pio_mask = ATA_PIO4,
- .udma_mask = ATA_UDMA6,
- .port_ops = &ahci_ops,
- },
- [board_ahci_yesncq] =
- {
- AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ),
- .flags = AHCI_FLAG_COMMON,
- .pio_mask = ATA_PIO4,
- .udma_mask = ATA_UDMA6,
- .port_ops = &ahci_ops,
- },
- [board_ahci_nosntf] =
- {
- AHCI_HFLAGS (AHCI_HFLAG_NO_SNTF),
- .flags = AHCI_FLAG_COMMON,
- .pio_mask = ATA_PIO4,
- .udma_mask = ATA_UDMA6,
- .port_ops = &ahci_ops,
- },
-};
-
-static const struct pci_device_id ahci_pci_tbl[] = {
- /* Intel */
- { PCI_VDEVICE(INTEL, 0x2652), board_ahci }, /* ICH6 */
- { PCI_VDEVICE(INTEL, 0x2653), board_ahci }, /* ICH6M */
- { PCI_VDEVICE(INTEL, 0x27c1), board_ahci }, /* ICH7 */
- { PCI_VDEVICE(INTEL, 0x27c5), board_ahci }, /* ICH7M */
- { PCI_VDEVICE(INTEL, 0x27c3), board_ahci }, /* ICH7R */
- { PCI_VDEVICE(AL, 0x5288), board_ahci_ign_iferr }, /* ULi M5288 */
- { PCI_VDEVICE(INTEL, 0x2681), board_ahci }, /* ESB2 */
- { PCI_VDEVICE(INTEL, 0x2682), board_ahci }, /* ESB2 */
- { PCI_VDEVICE(INTEL, 0x2683), board_ahci }, /* ESB2 */
- { PCI_VDEVICE(INTEL, 0x27c6), board_ahci }, /* ICH7-M DH */
- { PCI_VDEVICE(INTEL, 0x2821), board_ahci }, /* ICH8 */
- { PCI_VDEVICE(INTEL, 0x2822), board_ahci_nosntf }, /* ICH8 */
- { PCI_VDEVICE(INTEL, 0x2824), board_ahci }, /* ICH8 */
- { PCI_VDEVICE(INTEL, 0x2829), board_ahci }, /* ICH8M */
- { PCI_VDEVICE(INTEL, 0x282a), board_ahci }, /* ICH8M */
- { PCI_VDEVICE(INTEL, 0x2922), board_ahci }, /* ICH9 */
- { PCI_VDEVICE(INTEL, 0x2923), board_ahci }, /* ICH9 */
- { PCI_VDEVICE(INTEL, 0x2924), board_ahci }, /* ICH9 */
- { PCI_VDEVICE(INTEL, 0x2925), board_ahci }, /* ICH9 */
- { PCI_VDEVICE(INTEL, 0x2927), board_ahci }, /* ICH9 */
- { PCI_VDEVICE(INTEL, 0x2929), board_ahci }, /* ICH9M */
- { PCI_VDEVICE(INTEL, 0x292a), board_ahci }, /* ICH9M */
- { PCI_VDEVICE(INTEL, 0x292b), board_ahci }, /* ICH9M */
- { PCI_VDEVICE(INTEL, 0x292c), board_ahci }, /* ICH9M */
- { PCI_VDEVICE(INTEL, 0x292f), board_ahci }, /* ICH9M */
- { PCI_VDEVICE(INTEL, 0x294d), board_ahci }, /* ICH9 */
- { PCI_VDEVICE(INTEL, 0x294e), board_ahci }, /* ICH9M */
- { PCI_VDEVICE(INTEL, 0x502a), board_ahci }, /* Tolapai */
- { PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */
- { PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */
- { PCI_VDEVICE(INTEL, 0x3a22), board_ahci }, /* ICH10 */
- { PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */
- { PCI_VDEVICE(INTEL, 0x3b22), board_ahci }, /* PCH AHCI */
- { PCI_VDEVICE(INTEL, 0x3b23), board_ahci }, /* PCH AHCI */
- { PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */
- { PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */
- { PCI_VDEVICE(INTEL, 0x3b29), board_ahci }, /* PCH AHCI */
- { PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */
- { PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */
- { PCI_VDEVICE(INTEL, 0x3b2f), board_ahci }, /* PCH AHCI */
-
- /* JMicron 360/1/3/5/6, match class to avoid IDE function */
- { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci_ign_iferr },
-
- /* ATI */
- { PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */
- { PCI_VDEVICE(ATI, 0x4390), board_ahci_sb700 }, /* ATI SB700/800 */
- { PCI_VDEVICE(ATI, 0x4391), board_ahci_sb700 }, /* ATI SB700/800 */
- { PCI_VDEVICE(ATI, 0x4392), board_ahci_sb700 }, /* ATI SB700/800 */
- { PCI_VDEVICE(ATI, 0x4393), board_ahci_sb700 }, /* ATI SB700/800 */
- { PCI_VDEVICE(ATI, 0x4394), board_ahci_sb700 }, /* ATI SB700/800 */
- { PCI_VDEVICE(ATI, 0x4395), board_ahci_sb700 }, /* ATI SB700/800 */
-
- /* AMD */
- { PCI_VDEVICE(AMD, 0x7800), board_ahci }, /* AMD Hudson-2 */
- /* AMD is using RAID class only for ahci controllers */
- { PCI_VENDOR_ID_AMD, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_CLASS_STORAGE_RAID << 8, 0xffffff, board_ahci },
-
- /* VIA */
- { PCI_VDEVICE(VIA, 0x3349), board_ahci_vt8251 }, /* VIA VT8251 */
- { PCI_VDEVICE(VIA, 0x6287), board_ahci_vt8251 }, /* VIA VT8251 */
-
- /* NVIDIA */
- { PCI_VDEVICE(NVIDIA, 0x044c), board_ahci_mcp65 }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x044d), board_ahci_mcp65 }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x044e), board_ahci_mcp65 }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x044f), board_ahci_mcp65 }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x045c), board_ahci_mcp65 }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x045d), board_ahci_mcp65 }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x045e), board_ahci_mcp65 }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x045f), board_ahci_mcp65 }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x0550), board_ahci_yesncq }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0551), board_ahci_yesncq }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0552), board_ahci_yesncq }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0553), board_ahci_yesncq }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0554), board_ahci_yesncq }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0555), board_ahci_yesncq }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0556), board_ahci_yesncq }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0557), board_ahci_yesncq }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0558), board_ahci_yesncq }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0559), board_ahci_yesncq }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x055a), board_ahci_yesncq }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x055b), board_ahci_yesncq }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0580), board_ahci_yesncq }, /* Linux ID */
- { PCI_VDEVICE(NVIDIA, 0x07f0), board_ahci_yesncq }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07f1), board_ahci_yesncq }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07f2), board_ahci_yesncq }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07f3), board_ahci_yesncq }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07f4), board_ahci_yesncq }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07f5), board_ahci_yesncq }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07f6), board_ahci_yesncq }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07f7), board_ahci_yesncq }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07f8), board_ahci_yesncq }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07f9), board_ahci_yesncq }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07fa), board_ahci_yesncq }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07fb), board_ahci_yesncq }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x0ad0), board_ahci }, /* MCP77 */
- { PCI_VDEVICE(NVIDIA, 0x0ad1), board_ahci }, /* MCP77 */
- { PCI_VDEVICE(NVIDIA, 0x0ad2), board_ahci }, /* MCP77 */
- { PCI_VDEVICE(NVIDIA, 0x0ad3), board_ahci }, /* MCP77 */
- { PCI_VDEVICE(NVIDIA, 0x0ad4), board_ahci }, /* MCP77 */
- { PCI_VDEVICE(NVIDIA, 0x0ad5), board_ahci }, /* MCP77 */
- { PCI_VDEVICE(NVIDIA, 0x0ad6), board_ahci }, /* MCP77 */
- { PCI_VDEVICE(NVIDIA, 0x0ad7), board_ahci }, /* MCP77 */
- { PCI_VDEVICE(NVIDIA, 0x0ad8), board_ahci }, /* MCP77 */
- { PCI_VDEVICE(NVIDIA, 0x0ad9), board_ahci }, /* MCP77 */
- { PCI_VDEVICE(NVIDIA, 0x0ada), board_ahci }, /* MCP77 */
- { PCI_VDEVICE(NVIDIA, 0x0adb), board_ahci }, /* MCP77 */
- { PCI_VDEVICE(NVIDIA, 0x0ab4), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0ab5), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0ab6), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0ab7), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0ab8), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0ab9), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0aba), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0abb), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0abc), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0abd), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0abe), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0abf), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0d84), board_ahci }, /* MCP89 */
- { PCI_VDEVICE(NVIDIA, 0x0d85), board_ahci }, /* MCP89 */
- { PCI_VDEVICE(NVIDIA, 0x0d86), board_ahci }, /* MCP89 */
- { PCI_VDEVICE(NVIDIA, 0x0d87), board_ahci }, /* MCP89 */
- { PCI_VDEVICE(NVIDIA, 0x0d88), board_ahci }, /* MCP89 */
- { PCI_VDEVICE(NVIDIA, 0x0d89), board_ahci }, /* MCP89 */
- { PCI_VDEVICE(NVIDIA, 0x0d8a), board_ahci }, /* MCP89 */
- { PCI_VDEVICE(NVIDIA, 0x0d8b), board_ahci }, /* MCP89 */
- { PCI_VDEVICE(NVIDIA, 0x0d8c), board_ahci }, /* MCP89 */
- { PCI_VDEVICE(NVIDIA, 0x0d8d), board_ahci }, /* MCP89 */
- { PCI_VDEVICE(NVIDIA, 0x0d8e), board_ahci }, /* MCP89 */
- { PCI_VDEVICE(NVIDIA, 0x0d8f), board_ahci }, /* MCP89 */
-
- /* SiS */
- { PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */
- { PCI_VDEVICE(SI, 0x1185), board_ahci }, /* SiS 968 */
- { PCI_VDEVICE(SI, 0x0186), board_ahci }, /* SiS 968 */
-
- /* Marvell */
- { PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */
- { PCI_VDEVICE(MARVELL, 0x6121), board_ahci_mv }, /* 6121 */
-
- /* Promise */
- { PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */
-
- /* Generic, PCI class code for AHCI */
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci },
-
- { } /* terminate list */
-};
-
-
-static struct pci_driver ahci_pci_driver = {
- .name = DRV_NAME,
- .id_table = ahci_pci_tbl,
- .probe = ahci_init_one,
- .remove = ata_pci_remove_one,
-#ifdef CONFIG_PM
- .suspend = ahci_pci_device_suspend,
- .resume = ahci_pci_device_resume,
-#endif
-};
-
-static int ahci_em_messages = 1;
+int ahci_em_messages = 1;
module_param(ahci_em_messages, int, 0444);
/* add other LED protocol types when they become supported */
MODULE_PARM_DESC(ahci_em_messages,
"Set AHCI Enclosure Management Message type (0 = disabled, 1 = LED");
-#if defined(CONFIG_PATA_MARVELL) || defined(CONFIG_PATA_MARVELL_MODULE)
-static int marvell_enable;
-#else
-static int marvell_enable = 1;
-#endif
-module_param(marvell_enable, int, 0644);
-MODULE_PARM_DESC(marvell_enable, "Marvell SATA via AHCI (1 = enabled)");
-
-
-static inline int ahci_nr_ports(u32 cap)
-{
- return (cap & 0x1f) + 1;
-}
-
-static inline void __iomem *__ahci_port_base(struct ata_host *host,
- unsigned int port_no)
-{
- struct ahci_host_priv *hpriv = host->private_data;
- void __iomem *mmio = hpriv->mmio;
-
- return mmio + 0x100 + (port_no * 0x80);
-}
-
-static inline void __iomem *ahci_port_base(struct ata_port *ap)
-{
- return __ahci_port_base(ap->host, ap->port_no);
-}
-
static void ahci_enable_ahci(void __iomem *mmio)
{
int i;
@@ -814,10 +261,10 @@ static ssize_t ahci_show_port_cmd(struct device *dev,
* LOCKING:
* None.
*/
-static void ahci_save_initial_config(struct device *dev,
- struct ahci_host_priv *hpriv,
- unsigned int force_port_map,
- unsigned int mask_port_map)
+void ahci_save_initial_config(struct device *dev,
+ struct ahci_host_priv *hpriv,
+ unsigned int force_port_map,
+ unsigned int mask_port_map)
{
void __iomem *mmio = hpriv->mmio;
u32 cap, cap2, vers, port_map;
@@ -920,35 +367,6 @@ static void ahci_save_initial_config(struct device *dev,
hpriv->port_map = port_map;
}
-static void ahci_pci_save_initial_config(struct pci_dev *pdev,
- struct ahci_host_priv *hpriv)
-{
- unsigned int force_port_map = 0;
- unsigned int mask_port_map = 0;
-
- if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361) {
- dev_info(&pdev->dev, "JMB361 has only one port\n");
- force_port_map = 1;
- }
-
- /*
- * Temporary Marvell 6145 hack: PATA port presence
- * is asserted through the standard AHCI port
- * presence register, as bit 4 (counting from 0)
- */
- if (hpriv->flags & AHCI_HFLAG_MV_PATA) {
- if (pdev->device == 0x6121)
- mask_port_map = 0x3;
- else
- mask_port_map = 0xf;
- dev_info(&pdev->dev,
- "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n");
- }
-
- ahci_save_initial_config(&pdev->dev, hpriv, force_port_map,
- mask_port_map);
-}
-
/**
* ahci_restore_initial_config - Restore initial config
* @host: target ATA host
@@ -1011,7 +429,7 @@ static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val)
return -EINVAL;
}
-static void ahci_start_engine(struct ata_port *ap)
+void ahci_start_engine(struct ata_port *ap)
{
void __iomem *port_mmio = ahci_port_base(ap);
u32 tmp;
@@ -1023,7 +441,7 @@ static void ahci_start_engine(struct ata_port *ap)
readl(port_mmio + PORT_CMD); /* flush */
}
-static int ahci_stop_engine(struct ata_port *ap)
+int ahci_stop_engine(struct ata_port *ap)
{
void __iomem *port_mmio = ahci_port_base(ap);
u32 tmp;
@@ -1316,7 +734,7 @@ static int ahci_deinit_port(struct ata_port *ap, const char **emsg)
return 0;
}
-static int ahci_reset_controller(struct ata_host *host)
+int ahci_reset_controller(struct ata_host *host)
{
struct ahci_host_priv *hpriv = host->private_data;
void __iomem *mmio = hpriv->mmio;
@@ -1364,27 +782,6 @@ static int ahci_reset_controller(struct ata_host *host)
return 0;
}
-static int ahci_pci_reset_controller(struct ata_host *host)
-{
- struct pci_dev *pdev = to_pci_dev(host->dev);
-
- ahci_reset_controller(host);
-
- if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
- struct ahci_host_priv *hpriv = host->private_data;
- u16 tmp16;
-
- /* configure PCS */
- pci_read_config_word(pdev, 0x92, &tmp16);
- if ((tmp16 & hpriv->port_map) != hpriv->port_map) {
- tmp16 |= hpriv->port_map;
- pci_write_config_word(pdev, 0x92, tmp16);
- }
- }
-
- return 0;
-}
-
static void ahci_sw_activity(struct ata_link *link)
{
struct ata_port *ap = link->ap;
@@ -1458,7 +855,7 @@ static void ahci_init_sw_activity(struct ata_link *link)
link->flags |= ATA_LFLAG_SW_ACTIVITY;
}
-static int ahci_reset_em(struct ata_host *host)
+int ahci_reset_em(struct ata_host *host)
{
struct ahci_host_priv *hpriv = host->private_data;
void __iomem *mmio = hpriv->mmio;
@@ -1640,7 +1037,7 @@ static void ahci_port_init(struct device *dev, struct ata_port *ap,
writel(1 << port_no, mmio + HOST_IRQ_STAT);
}
-static void ahci_init_controller(struct ata_host *host)
+void ahci_init_controller(struct ata_host *host)
{
struct ahci_host_priv *hpriv = host->private_data;
void __iomem *mmio = hpriv->mmio;
@@ -1665,33 +1062,6 @@ static void ahci_init_controller(struct ata_host *host)
VPRINTK("HOST_CTL 0x%x\n", tmp);
}
-static void ahci_pci_init_controller(struct ata_host *host)
-{
- struct ahci_host_priv *hpriv = host->private_data;
- struct pci_dev *pdev = to_pci_dev(host->dev);
- void __iomem *port_mmio;
- u32 tmp;
- int mv;
-
- if (hpriv->flags & AHCI_HFLAG_MV_PATA) {
- if (pdev->device == 0x6121)
- mv = 2;
- else
- mv = 4;
- port_mmio = __ahci_port_base(host, mv);
-
- writel(0, port_mmio + PORT_IRQ_MASK);
-
- /* clear port IRQ */
- tmp = readl(port_mmio + PORT_IRQ_STAT);
- VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
- if (tmp)
- writel(tmp, port_mmio + PORT_IRQ_STAT);
- }
-
- ahci_init_controller(host);
-}
-
static void ahci_dev_config(struct ata_device *dev)
{
struct ahci_host_priv *hpriv = dev->link->ap->host->private_data;
@@ -1731,7 +1101,7 @@ static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
pp->cmd_slot[tag].tbl_addr_hi = cpu_to_le32((cmd_tbl_dma >> 16) >> 16);
}
-static int ahci_kick_engine(struct ata_port *ap)
+int ahci_kick_engine(struct ata_port *ap)
{
void __iomem *port_mmio = ahci_port_base(ap);
struct ahci_host_priv *hpriv = ap->host->private_data;
@@ -1805,9 +1175,9 @@ static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp,
return 0;
}
-static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
- int pmp, unsigned long deadline,
- int (*check_ready)(struct ata_link *link))
+int ahci_do_softreset(struct ata_link *link, unsigned int *class,
+ int pmp, unsigned long deadline,
+ int (*check_ready)(struct ata_link *link))
{
struct ata_port *ap = link->ap;
struct ahci_host_priv *hpriv = ap->host->private_data;
@@ -1873,7 +1243,7 @@ static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
return rc;
}
-static int ahci_check_ready(struct ata_link *link)
+int ahci_check_ready(struct ata_link *link)
{
void __iomem *port_mmio = ahci_port_base(link->ap);
u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
@@ -1891,55 +1261,6 @@ static int ahci_softreset(struct ata_link *link, unsigned int *class,
return ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready);
}
-static int ahci_sb600_check_ready(struct ata_link *link)
-{
- void __iomem *port_mmio = ahci_port_base(link->ap);
- u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
- u32 irq_status = readl(port_mmio + PORT_IRQ_STAT);
-
- /*
- * There is no need to check TFDATA if BAD PMP is found due to HW bug,
- * which can save timeout delay.
- */
- if (irq_status & PORT_IRQ_BAD_PMP)
- return -EIO;
-
- return ata_check_ready(status);
-}
-
-static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline)
-{
- struct ata_port *ap = link->ap;
- void __iomem *port_mmio = ahci_port_base(ap);
- int pmp = sata_srst_pmp(link);
- int rc;
- u32 irq_sts;
-
- DPRINTK("ENTER\n");
-
- rc = ahci_do_softreset(link, class, pmp, deadline,
- ahci_sb600_check_ready);
-
- /*
- * Soft reset fails on some ATI chips with IPMS set when PMP
- * is enabled but SATA HDD/ODD is connected to SATA port,
- * do soft reset again to port 0.
- */
- if (rc == -EIO) {
- irq_sts = readl(port_mmio + PORT_IRQ_STAT);
- if (irq_sts & PORT_IRQ_BAD_PMP) {
- ata_link_printk(link, KERN_WARNING,
- "applying SB600 PMP SRST workaround "
- "and retrying\n");
- rc = ahci_do_softreset(link, class, 0, deadline,
- ahci_check_ready);
- }
- }
-
- return rc;
-}
-
static int ahci_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
@@ -1972,74 +1293,6 @@ static int ahci_hardreset(struct ata_link *link, unsigned int *class,
return rc;
}
-static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline)
-{
- struct ata_port *ap = link->ap;
- bool online;
- int rc;
-
- DPRINTK("ENTER\n");
-
- ahci_stop_engine(ap);
-
- rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
- deadline, &online, NULL);
-
- ahci_start_engine(ap);
-
- DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
-
- /* vt8251 doesn't clear BSY on signature FIS reception,
- * request follow-up softreset.
- */
- return online ? -EAGAIN : rc;
-}
-
-static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline)
-{
- struct ata_port *ap = link->ap;
- struct ahci_port_priv *pp = ap->private_data;
- u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
- struct ata_taskfile tf;
- bool online;
- int rc;
-
- ahci_stop_engine(ap);
-
- /* clear D2H reception area to properly wait for D2H FIS */
- ata_tf_init(link->device, &tf);
- tf.command = 0x80;
- ata_tf_to_fis(&tf, 0, 0, d2h_fis);
-
- rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
- deadline, &online, NULL);
-
- ahci_start_engine(ap);
-
- /* The pseudo configuration device on SIMG4726 attached to
- * ASUS P5W-DH Deluxe doesn't send signature FIS after
- * hardreset if no device is attached to the first downstream
- * port && the pseudo device locks up on SRST w/ PMP==0. To
- * work around this, wait for !BSY only briefly. If BSY isn't
- * cleared, perform CLO and proceed to IDENTIFY (achieved by
- * ATA_LFLAG_NO_SRST and ATA_LFLAG_ASSUME_ATA).
- *
- * Wait for two seconds. Devices attached to downstream port
- * which can't process the following IDENTIFY after this will
- * have to be reset again. For most cases, this should
- * suffice while making probing snappish enough.
- */
- if (online) {
- rc = ata_wait_after_reset(link, jiffies + 2 * HZ,
- ahci_check_ready);
- if (rc)
- ahci_kick_engine(ap);
- }
- return rc;
-}
-
static void ahci_postreset(struct ata_link *link, unsigned int *class)
{
struct ata_port *ap = link->ap;
@@ -2285,7 +1538,7 @@ static void ahci_port_intr(struct ata_port *ap)
}
}
-static irqreturn_t ahci_interrupt(int irq, void *dev_instance)
+irqreturn_t ahci_interrupt(int irq, void *dev_instance)
{
struct ata_host *host = dev_instance;
struct ahci_host_priv *hpriv;
@@ -2477,56 +1730,6 @@ static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg)
return rc;
}
-
-static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
-{
- struct ata_host *host = dev_get_drvdata(&pdev->dev);
- struct ahci_host_priv *hpriv = host->private_data;
- void __iomem *mmio = hpriv->mmio;
- u32 ctl;
-
- if (mesg.event & PM_EVENT_SUSPEND &&
- hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
- dev_printk(KERN_ERR, &pdev->dev,
- "BIOS update required for suspend/resume\n");
- return -EIO;
- }
-
- if (mesg.event & PM_EVENT_SLEEP) {
- /* AHCI spec rev1.1 section 8.3.3:
- * Software must disable interrupts prior to requesting a
- * transition of the HBA to D3 state.
- */
- ctl = readl(mmio + HOST_CTL);
- ctl &= ~HOST_IRQ_EN;
- writel(ctl, mmio + HOST_CTL);
- readl(mmio + HOST_CTL); /* flush */
- }
-
- return ata_pci_device_suspend(pdev, mesg);
-}
-
-static int ahci_pci_device_resume(struct pci_dev *pdev)
-{
- struct ata_host *host = dev_get_drvdata(&pdev->dev);
- int rc;
-
- rc = ata_pci_device_do_resume(pdev);
- if (rc)
- return rc;
-
- if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
- rc = ahci_pci_reset_controller(host);
- if (rc)
- return rc;
-
- ahci_pci_init_controller(host);
- }
-
- ata_host_resume(host);
-
- return 0;
-}
#endif
static int ahci_port_start(struct ata_port *ap)
@@ -2595,39 +1798,7 @@ static void ahci_port_stop(struct ata_port *ap)
ata_port_printk(ap, KERN_WARNING, "%s (%d)\n", emsg, rc);
}
-static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
-{
- int rc;
-
- if (using_dac &&
- !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
- rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
- if (rc) {
- rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
- if (rc) {
- dev_printk(KERN_ERR, &pdev->dev,
- "64-bit DMA enable failed\n");
- return rc;
- }
- }
- } else {
- rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
- if (rc) {
- dev_printk(KERN_ERR, &pdev->dev,
- "32-bit DMA enable failed\n");
- return rc;
- }
- rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
- if (rc) {
- dev_printk(KERN_ERR, &pdev->dev,
- "32-bit consistent DMA enable failed\n");
- return rc;
- }
- }
- return 0;
-}
-
-static void ahci_print_info(struct ata_host *host, const char *scc_s)
+void ahci_print_info(struct ata_host *host, const char *scc_s)
{
struct ahci_host_priv *hpriv = host->private_data;
void __iomem *mmio = hpriv->mmio;
@@ -2695,353 +1866,8 @@ static void ahci_print_info(struct ata_host *host, const char *scc_s)
);
}
-static void ahci_pci_print_info(struct ata_host *host)
-{
- struct pci_dev *pdev = to_pci_dev(host->dev);
- u16 cc;
- const char *scc_s;
-
- pci_read_config_word(pdev, 0x0a, &cc);
- if (cc == PCI_CLASS_STORAGE_IDE)
- scc_s = "IDE";
- else if (cc == PCI_CLASS_STORAGE_SATA)
- scc_s = "SATA";
- else if (cc == PCI_CLASS_STORAGE_RAID)
- scc_s = "RAID";
- else
- scc_s = "unknown";
-
- ahci_print_info(host, scc_s);
-}
-
-/* On ASUS P5W DH Deluxe, the second port of PCI device 00:1f.2 is
- * hardwired to on-board SIMG 4726. The chipset is ICH8 and doesn't
- * support PMP and the 4726 either directly exports the device
- * attached to the first downstream port or acts as a hardware storage
- * controller and emulate a single ATA device (can be RAID 0/1 or some
- * other configuration).
- *
- * When there's no device attached to the first downstream port of the
- * 4726, "Config Disk" appears, which is a pseudo ATA device to
- * configure the 4726. However, ATA emulation of the device is very
- * lame. It doesn't send signature D2H Reg FIS after the initial
- * hardreset, pukes on SRST w/ PMP==0 and has bunch of other issues.
- *
- * The following function works around the problem by always using
- * hardreset on the port and not depending on receiving signature FIS
- * afterward. If signature FIS isn't received soon, ATA class is
- * assumed without follow-up softreset.
- */
-static void ahci_p5wdh_workaround(struct ata_host *host)
-{
- static struct dmi_system_id sysids[] = {
- {
- .ident = "P5W DH Deluxe",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "ASUSTEK COMPUTER INC"),
- DMI_MATCH(DMI_PRODUCT_NAME, "P5W DH Deluxe"),
- },
- },
- { }
- };
- struct pci_dev *pdev = to_pci_dev(host->dev);
-
- if (pdev->bus->number == 0 && pdev->devfn == PCI_DEVFN(0x1f, 2) &&
- dmi_check_system(sysids)) {
- struct ata_port *ap = host->ports[1];
-
- dev_printk(KERN_INFO, &pdev->dev, "enabling ASUS P5W DH "
- "Deluxe on-board SIMG4726 workaround\n");
-
- ap->ops = &ahci_p5wdh_ops;
- ap->link.flags |= ATA_LFLAG_NO_SRST | ATA_LFLAG_ASSUME_ATA;
- }
-}
-
-/* only some SB600 ahci controllers can do 64bit DMA */
-static bool ahci_sb600_enable_64bit(struct pci_dev *pdev)
-{
- static const struct dmi_system_id sysids[] = {
- /*
- * The oldest version known to be broken is 0901 and
- * working is 1501 which was released on 2007-10-26.
- * Enable 64bit DMA on 1501 and anything newer.
- *
- * Please read bko#9412 for more info.
- */
- {
- .ident = "ASUS M2A-VM",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR,
- "ASUSTeK Computer INC."),
- DMI_MATCH(DMI_BOARD_NAME, "M2A-VM"),
- },
- .driver_data = "20071026", /* yyyymmdd */
- },
- /*
- * All BIOS versions for the MSI K9A2 Platinum (MS-7376)
- * support 64bit DMA.
- *
- * BIOS versions earlier than 1.5 had the Manufacturer DMI
- * fields as "MICRO-STAR INTERANTIONAL CO.,LTD".
- * This spelling mistake was fixed in BIOS version 1.5, so
- * 1.5 and later have the Manufacturer as
- * "MICRO-STAR INTERNATIONAL CO.,LTD".
- * So try to match on DMI_BOARD_VENDOR of "MICRO-STAR INTER".
- *
- * BIOS versions earlier than 1.9 had a Board Product Name
- * DMI field of "MS-7376". This was changed to be
- * "K9A2 Platinum (MS-7376)" in version 1.9, but we can still
- * match on DMI_BOARD_NAME of "MS-7376".
- */
- {
- .ident = "MSI K9A2 Platinum",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR,
- "MICRO-STAR INTER"),
- DMI_MATCH(DMI_BOARD_NAME, "MS-7376"),
- },
- },
- { }
- };
- const struct dmi_system_id *match;
- int year, month, date;
- char buf[9];
-
- match = dmi_first_match(sysids);
- if (pdev->bus->number != 0 || pdev->devfn != PCI_DEVFN(0x12, 0) ||
- !match)
- return false;
-
- if (!match->driver_data)
- goto enable_64bit;
-
- dmi_get_date(DMI_BIOS_DATE, &year, &month, &date);
- snprintf(buf, sizeof(buf), "%04d%02d%02d", year, month, date);
-
- if (strcmp(buf, match->driver_data) >= 0)
- goto enable_64bit;
- else {
- dev_printk(KERN_WARNING, &pdev->dev, "%s: BIOS too old, "
- "forcing 32bit DMA, update BIOS\n", match->ident);
- return false;
- }
-
-enable_64bit:
- dev_printk(KERN_WARNING, &pdev->dev, "%s: enabling 64bit DMA\n",
- match->ident);
- return true;
-}
-
-static bool ahci_broken_system_poweroff(struct pci_dev *pdev)
-{
- static const struct dmi_system_id broken_systems[] = {
- {
- .ident = "HP Compaq nx6310",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
- DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6310"),
- },
- /* PCI slot number of the controller */
- .driver_data = (void *)0x1FUL,
- },
- {
- .ident = "HP Compaq 6720s",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
- DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6720s"),
- },
- /* PCI slot number of the controller */
- .driver_data = (void *)0x1FUL,
- },
-
- { } /* terminate list */
- };
- const struct dmi_system_id *dmi = dmi_first_match(broken_systems);
-
- if (dmi) {
- unsigned long slot = (unsigned long)dmi->driver_data;
- /* apply the quirk only to on-board controllers */
- return slot == PCI_SLOT(pdev->devfn);
- }
-
- return false;
-}
-
-static bool ahci_broken_suspend(struct pci_dev *pdev)
-{
- static const struct dmi_system_id sysids[] = {
- /*
- * On HP dv[4-6] and HDX18 with earlier BIOSen, link
- * to the harddisk doesn't become online after
- * resuming from STR. Warn and fail suspend.
- */
- {
- .ident = "dv4",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
- DMI_MATCH(DMI_PRODUCT_NAME,
- "HP Pavilion dv4 Notebook PC"),
- },
- .driver_data = "F.30", /* cutoff BIOS version */
- },
- {
- .ident = "dv5",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
- DMI_MATCH(DMI_PRODUCT_NAME,
- "HP Pavilion dv5 Notebook PC"),
- },
- .driver_data = "F.16", /* cutoff BIOS version */
- },
- {
- .ident = "dv6",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
- DMI_MATCH(DMI_PRODUCT_NAME,
- "HP Pavilion dv6 Notebook PC"),
- },
- .driver_data = "F.21", /* cutoff BIOS version */
- },
- {
- .ident = "HDX18",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
- DMI_MATCH(DMI_PRODUCT_NAME,
- "HP HDX18 Notebook PC"),
- },
- .driver_data = "F.23", /* cutoff BIOS version */
- },
- /*
- * Acer eMachines G725 has the same problem. BIOS
- * V1.03 is known to be broken. V3.04 is known to
- * work. Inbetween, there are V1.06, V2.06 and V3.03
- * that we don't have much idea about. For now,
- * blacklist anything older than V3.04.
- */
- {
- .ident = "G725",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "eMachines"),
- DMI_MATCH(DMI_PRODUCT_NAME, "eMachines G725"),
- },
- .driver_data = "V3.04", /* cutoff BIOS version */
- },
- { } /* terminate list */
- };
- const struct dmi_system_id *dmi = dmi_first_match(sysids);
- const char *ver;
-
- if (!dmi || pdev->bus->number || pdev->devfn != PCI_DEVFN(0x1f, 2))
- return false;
-
- ver = dmi_get_system_info(DMI_BIOS_VERSION);
-
- return !ver || strcmp(ver, dmi->driver_data) < 0;
-}
-
-static bool ahci_broken_online(struct pci_dev *pdev)
-{
-#define ENCODE_BUSDEVFN(bus, slot, func) \
- (void *)(unsigned long)(((bus) << 8) | PCI_DEVFN((slot), (func)))
- static const struct dmi_system_id sysids[] = {
- /*
- * There are several gigabyte boards which use
- * SIMG5723s configured as hardware RAID. Certain
- * 5723 firmware revisions shipped there keep the link
- * online but fail to answer properly to SRST or
- * IDENTIFY when no device is attached downstream
- * causing libata to retry quite a few times leading
- * to excessive detection delay.
- *
- * As these firmwares respond to the second reset try
- * with invalid device signature, considering unknown
- * sig as offline works around the problem acceptably.
- */
- {
- .ident = "EP45-DQ6",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR,
- "Gigabyte Technology Co., Ltd."),
- DMI_MATCH(DMI_BOARD_NAME, "EP45-DQ6"),
- },
- .driver_data = ENCODE_BUSDEVFN(0x0a, 0x00, 0),
- },
- {
- .ident = "EP45-DS5",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR,
- "Gigabyte Technology Co., Ltd."),
- DMI_MATCH(DMI_BOARD_NAME, "EP45-DS5"),
- },
- .driver_data = ENCODE_BUSDEVFN(0x03, 0x00, 0),
- },
- { } /* terminate list */
- };
-#undef ENCODE_BUSDEVFN
- const struct dmi_system_id *dmi = dmi_first_match(sysids);
- unsigned int val;
-
- if (!dmi)
- return false;
-
- val = (unsigned long)dmi->driver_data;
-
- return pdev->bus->number == (val >> 8) && pdev->devfn == (val & 0xff);
-}
-
-#ifdef CONFIG_ATA_ACPI
-static void ahci_gtf_filter_workaround(struct ata_host *host)
-{
- static const struct dmi_system_id sysids[] = {
- /*
- * Aspire 3810T issues a bunch of SATA enable commands
- * via _GTF including an invalid one and one which is
- * rejected by the device. Among the successful ones
- * is FPDMA non-zero offset enable which when enabled
- * only on the drive side leads to NCQ command
- * failures. Filter it out.
- */
- {
- .ident = "Aspire 3810T",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 3810T"),
- },
- .driver_data = (void *)ATA_ACPI_FILTER_FPDMA_OFFSET,
- },
- { }
- };
- const struct dmi_system_id *dmi = dmi_first_match(sysids);
- unsigned int filter;
- int i;
-
- if (!dmi)
- return;
-
- filter = (unsigned long)dmi->driver_data;
- dev_printk(KERN_INFO, host->dev,
- "applying extra ACPI _GTF filter 0x%x for %s\n",
- filter, dmi->ident);
-
- for (i = 0; i < host->n_ports; i++) {
- struct ata_port *ap = host->ports[i];
- struct ata_link *link;
- struct ata_device *dev;
-
- ata_for_each_link(link, ap, EDGE)
- ata_for_each_dev(dev, link, ALL)
- dev->gtf_filter |= filter;
- }
-}
-#else
-static inline void ahci_gtf_filter_workaround(struct ata_host *host)
-{}
-#endif
-
-static void ahci_set_em_messages(struct ahci_host_priv *hpriv,
- struct ata_port_info *pi)
+void ahci_set_em_messages(struct ahci_host_priv *hpriv,
+ struct ata_port_info *pi)
{
u8 messages;
void __iomem *mmio = hpriv->mmio;
@@ -3062,209 +1888,3 @@ static void ahci_set_em_messages(struct ahci_host_priv *hpriv,
pi->flags |= ATA_FLAG_SW_ACTIVITY;
}
}
-
-static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
-{
- static int printed_version;
- unsigned int board_id = ent->driver_data;
- struct ata_port_info pi = ahci_port_info[board_id];
- const struct ata_port_info *ppi[] = { &pi, NULL };
- struct device *dev = &pdev->dev;
- struct ahci_host_priv *hpriv;
- struct ata_host *host;
- int n_ports, i, rc;
-
- VPRINTK("ENTER\n");
-
- WARN_ON(ATA_MAX_QUEUE > AHCI_MAX_CMDS);
-
- if (!printed_version++)
- dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
-
- /* The AHCI driver can only drive the SATA ports, the PATA driver
- can drive them all so if both drivers are selected make sure
- AHCI stays out of the way */
- if (pdev->vendor == PCI_VENDOR_ID_MARVELL && !marvell_enable)
- return -ENODEV;
-
- /* Promise's PDC42819 is a SAS/SATA controller that has an AHCI mode.
- * At the moment, we can only use the AHCI mode. Let the users know
- * that for SAS drives they're out of luck.
- */
- if (pdev->vendor == PCI_VENDOR_ID_PROMISE)
- dev_printk(KERN_INFO, &pdev->dev, "PDC42819 "
- "can only drive SATA devices with this driver\n");
-
- /* acquire resources */
- rc = pcim_enable_device(pdev);
- if (rc)
- return rc;
-
- /* AHCI controllers often implement SFF compatible interface.
- * Grab all PCI BARs just in case.
- */
- rc = pcim_iomap_regions_request_all(pdev, 1 << AHCI_PCI_BAR, DRV_NAME);
- if (rc == -EBUSY)
- pcim_pin_device(pdev);
- if (rc)
- return rc;
-
- if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
- (pdev->device == 0x2652 || pdev->device == 0x2653)) {
- u8 map;
-
- /* ICH6s share the same PCI ID for both piix and ahci
- * modes. Enabling ahci mode while MAP indicates
- * combined mode is a bad idea. Yield to ata_piix.
- */
- pci_read_config_byte(pdev, ICH_MAP, &map);
- if (map & 0x3) {
- dev_printk(KERN_INFO, &pdev->dev, "controller is in "
- "combined mode, can't enable AHCI mode\n");
- return -ENODEV;
- }
- }
-
- hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
- if (!hpriv)
- return -ENOMEM;
- hpriv->flags |= (unsigned long)pi.private_data;
-
- /* MCP65 revision A1 and A2 can't do MSI */
- if (board_id == board_ahci_mcp65 &&
- (pdev->revision == 0xa1 || pdev->revision == 0xa2))
- hpriv->flags |= AHCI_HFLAG_NO_MSI;
-
- /* SB800 does NOT need the workaround to ignore SERR_INTERNAL */
- if (board_id == board_ahci_sb700 && pdev->revision >= 0x40)
- hpriv->flags &= ~AHCI_HFLAG_IGN_SERR_INTERNAL;
-
- /* only some SB600s can do 64bit DMA */
- if (ahci_sb600_enable_64bit(pdev))
- hpriv->flags &= ~AHCI_HFLAG_32BIT_ONLY;
-
- if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev))
- pci_intx(pdev, 1);
-
- hpriv->mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
-
- /* save initial config */
- ahci_pci_save_initial_config(pdev, hpriv);
-
- /* prepare host */
- if (hpriv->cap & HOST_CAP_NCQ) {
- pi.flags |= ATA_FLAG_NCQ;
- /* Auto-activate optimization is supposed to be supported on
- all AHCI controllers indicating NCQ support, but it seems
- to be broken at least on some NVIDIA MCP79 chipsets.
- Until we get info on which NVIDIA chipsets don't have this
- issue, if any, disable AA on all NVIDIA AHCIs. */
- if (pdev->vendor != PCI_VENDOR_ID_NVIDIA)
- pi.flags |= ATA_FLAG_FPDMA_AA;
- }
-
- if (hpriv->cap & HOST_CAP_PMP)
- pi.flags |= ATA_FLAG_PMP;
-
- ahci_set_em_messages(hpriv, &pi);
-
- if (ahci_broken_system_poweroff(pdev)) {
- pi.flags |= ATA_FLAG_NO_POWEROFF_SPINDOWN;
- dev_info(&pdev->dev,
- "quirky BIOS, skipping spindown on poweroff\n");
- }
-
- if (ahci_broken_suspend(pdev)) {
- hpriv->flags |= AHCI_HFLAG_NO_SUSPEND;
- dev_printk(KERN_WARNING, &pdev->dev,
- "BIOS update required for suspend/resume\n");
- }
-
- if (ahci_broken_online(pdev)) {
- hpriv->flags |= AHCI_HFLAG_SRST_TOUT_IS_OFFLINE;
- dev_info(&pdev->dev,
- "online status unreliable, applying workaround\n");
- }
-
- /* CAP.NP sometimes indicate the index of the last enabled
- * port, at other times, that of the last possible port, so
- * determining the maximum port number requires looking at
- * both CAP.NP and port_map.
- */
- n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
-
- host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
- if (!host)
- return -ENOMEM;
- host->private_data = hpriv;
-
- if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
- host->flags |= ATA_HOST_PARALLEL_SCAN;
- else
- printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n");
-
- if (pi.flags & ATA_FLAG_EM)
- ahci_reset_em(host);
-
- for (i = 0; i < host->n_ports; i++) {
- struct ata_port *ap = host->ports[i];
-
- ata_port_pbar_desc(ap, AHCI_PCI_BAR, -1, "abar");
- ata_port_pbar_desc(ap, AHCI_PCI_BAR,
- 0x100 + ap->port_no * 0x80, "port");
-
- /* set initial link pm policy */
- ap->pm_policy = NOT_AVAILABLE;
-
- /* set enclosure management message type */
- if (ap->flags & ATA_FLAG_EM)
- ap->em_message_type = ahci_em_messages;
-
-
- /* disabled/not-implemented port */
- if (!(hpriv->port_map & (1 << i)))
- ap->ops = &ata_dummy_port_ops;
- }
-
- /* apply workaround for ASUS P5W DH Deluxe mainboard */
- ahci_p5wdh_workaround(host);
-
- /* apply gtf filter quirk */
- ahci_gtf_filter_workaround(host);
-
- /* initialize adapter */
- rc = ahci_configure_dma_masks(pdev, hpriv->cap & HOST_CAP_64);
- if (rc)
- return rc;
-
- rc = ahci_pci_reset_controller(host);
- if (rc)
- return rc;
-
- ahci_pci_init_controller(host);
- ahci_pci_print_info(host);
-
- pci_set_master(pdev);
- return ata_host_activate(host, pdev->irq, ahci_interrupt, IRQF_SHARED,
- &ahci_sht);
-}
-
-static int __init ahci_init(void)
-{
- return pci_register_driver(&ahci_pci_driver);
-}
-
-static void __exit ahci_exit(void)
-{
- pci_unregister_driver(&ahci_pci_driver);
-}
-
-
-MODULE_AUTHOR("Jeff Garzik");
-MODULE_DESCRIPTION("AHCI SATA low-level driver");
-MODULE_LICENSE("GPL");
-MODULE_DEVICE_TABLE(pci, ahci_pci_tbl);
-MODULE_VERSION(DRV_VERSION);
-
-module_init(ahci_init);
-module_exit(ahci_exit);
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
new file mode 100644
index 0000000..6d66717
--- /dev/null
+++ b/drivers/ata/ahci.h
@@ -0,0 +1,277 @@
+#define DRV_NAME "ahci"
+
+/* Enclosure Management Control */
+#define EM_CTRL_MSG_TYPE 0x000f0000
+
+/* Enclosure Management LED Message Type */
+#define EM_MSG_LED_HBA_PORT 0x0000000f
+#define EM_MSG_LED_PMP_SLOT 0x0000ff00
+#define EM_MSG_LED_VALUE 0xffff0000
+#define EM_MSG_LED_VALUE_ACTIVITY 0x00070000
+#define EM_MSG_LED_VALUE_OFF 0xfff80000
+#define EM_MSG_LED_VALUE_ON 0x00010000
+
+enum {
+ AHCI_MAX_PORTS = 32,
+ AHCI_MAX_SG = 168, /* hardware max is 64K */
+ AHCI_DMA_BOUNDARY = 0xffffffff,
+ AHCI_MAX_CMDS = 32,
+ AHCI_CMD_SZ = 32,
+ AHCI_CMD_SLOT_SZ = AHCI_MAX_CMDS * AHCI_CMD_SZ,
+ AHCI_RX_FIS_SZ = 256,
+ AHCI_CMD_TBL_CDB = 0x40,
+ AHCI_CMD_TBL_HDR_SZ = 0x80,
+ AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16),
+ AHCI_CMD_TBL_AR_SZ = AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS,
+ AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ +
+ AHCI_RX_FIS_SZ,
+ AHCI_IRQ_ON_SG = (1 << 31),
+ AHCI_CMD_ATAPI = (1 << 5),
+ AHCI_CMD_WRITE = (1 << 6),
+ AHCI_CMD_PREFETCH = (1 << 7),
+ AHCI_CMD_RESET = (1 << 8),
+ AHCI_CMD_CLR_BUSY = (1 << 10),
+
+ RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */
+ RX_FIS_SDB = 0x58, /* offset of SDB FIS data */
+ RX_FIS_UNK = 0x60, /* offset of Unknown FIS data */
+
+ /* global controller registers */
+ HOST_CAP = 0x00, /* host capabilities */
+ HOST_CTL = 0x04, /* global host control */
+ HOST_IRQ_STAT = 0x08, /* interrupt status */
+ HOST_PORTS_IMPL = 0x0c, /* bitmap of implemented ports */
+ HOST_VERSION = 0x10, /* AHCI spec. version compliancy */
+ HOST_EM_LOC = 0x1c, /* Enclosure Management location */
+ HOST_EM_CTL = 0x20, /* Enclosure Management Control */
+ HOST_CAP2 = 0x24, /* host capabilities, extended */
+
+ /* HOST_CTL bits */
+ HOST_RESET = (1 << 0), /* reset controller; self-clear */
+ HOST_IRQ_EN = (1 << 1), /* global IRQ enable */
+ HOST_AHCI_EN = (1 << 31), /* AHCI enabled */
+
+ /* HOST_CAP bits */
+ HOST_CAP_SXS = (1 << 5), /* Supports External SATA */
+ HOST_CAP_EMS = (1 << 6), /* Enclosure Management support */
+ HOST_CAP_CCC = (1 << 7), /* Command Completion Coalescing */
+ HOST_CAP_PART = (1 << 13), /* Partial state capable */
+ HOST_CAP_SSC = (1 << 14), /* Slumber state capable */
+ HOST_CAP_PIO_MULTI = (1 << 15), /* PIO multiple DRQ support */
+ HOST_CAP_FBS = (1 << 16), /* FIS-based switching support */
+ HOST_CAP_PMP = (1 << 17), /* Port Multiplier support */
+ HOST_CAP_ONLY = (1 << 18), /* Supports AHCI mode only */
+ HOST_CAP_CLO = (1 << 24), /* Command List Override support */
+ HOST_CAP_LED = (1 << 25), /* Supports activity LED */
+ HOST_CAP_ALPM = (1 << 26), /* Aggressive Link PM support */
+ HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */
+ HOST_CAP_MPS = (1 << 28), /* Mechanical presence switch */
+ HOST_CAP_SNTF = (1 << 29), /* SNotification register */
+ HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */
+ HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */
+
+ /* HOST_CAP2 bits */
+ HOST_CAP2_BOH = (1 << 0), /* BIOS/OS handoff supported */
+ HOST_CAP2_NVMHCI = (1 << 1), /* NVMHCI supported */
+ HOST_CAP2_APST = (1 << 2), /* Automatic partial to slumber */
+
+ /* registers for each SATA port */
+ PORT_LST_ADDR = 0x00, /* command list DMA addr */
+ PORT_LST_ADDR_HI = 0x04, /* command list DMA addr hi */
+ PORT_FIS_ADDR = 0x08, /* FIS rx buf addr */
+ PORT_FIS_ADDR_HI = 0x0c, /* FIS rx buf addr hi */
+ PORT_IRQ_STAT = 0x10, /* interrupt status */
+ PORT_IRQ_MASK = 0x14, /* interrupt enable/disable mask */
+ PORT_CMD = 0x18, /* port command */
+ PORT_TFDATA = 0x20, /* taskfile data */
+ PORT_SIG = 0x24, /* device TF signature */
+ PORT_CMD_ISSUE = 0x38, /* command issue */
+ PORT_SCR_STAT = 0x28, /* SATA phy register: SStatus */
+ PORT_SCR_CTL = 0x2c, /* SATA phy register: SControl */
+ PORT_SCR_ERR = 0x30, /* SATA phy register: SError */
+ PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */
+ PORT_SCR_NTF = 0x3c, /* SATA phy register: SNotification */
+
+ /* PORT_IRQ_{STAT,MASK} bits */
+ PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */
+ PORT_IRQ_TF_ERR = (1 << 30), /* task file error */
+ PORT_IRQ_HBUS_ERR = (1 << 29), /* host bus fatal error */
+ PORT_IRQ_HBUS_DATA_ERR = (1 << 28), /* host bus data error */
+ PORT_IRQ_IF_ERR = (1 << 27), /* interface fatal error */
+ PORT_IRQ_IF_NONFATAL = (1 << 26), /* interface non-fatal error */
+ PORT_IRQ_OVERFLOW = (1 << 24), /* xfer exhausted available S/G */
+ PORT_IRQ_BAD_PMP = (1 << 23), /* incorrect port multiplier */
+
+ PORT_IRQ_PHYRDY = (1 << 22), /* PhyRdy changed */
+ PORT_IRQ_DEV_ILCK = (1 << 7), /* device interlock */
+ PORT_IRQ_CONNECT = (1 << 6), /* port connect change status */
+ PORT_IRQ_SG_DONE = (1 << 5), /* descriptor processed */
+ PORT_IRQ_UNK_FIS = (1 << 4), /* unknown FIS rx'd */
+ PORT_IRQ_SDB_FIS = (1 << 3), /* Set Device Bits FIS rx'd */
+ PORT_IRQ_DMAS_FIS = (1 << 2), /* DMA Setup FIS rx'd */
+ PORT_IRQ_PIOS_FIS = (1 << 1), /* PIO Setup FIS rx'd */
+ PORT_IRQ_D2H_REG_FIS = (1 << 0), /* D2H Register FIS rx'd */
+
+ PORT_IRQ_FREEZE = PORT_IRQ_HBUS_ERR |
+ PORT_IRQ_IF_ERR |
+ PORT_IRQ_CONNECT |
+ PORT_IRQ_PHYRDY |
+ PORT_IRQ_UNK_FIS |
+ PORT_IRQ_BAD_PMP,
+ PORT_IRQ_ERROR = PORT_IRQ_FREEZE |
+ PORT_IRQ_TF_ERR |
+ PORT_IRQ_HBUS_DATA_ERR,
+ DEF_PORT_IRQ = PORT_IRQ_ERROR | PORT_IRQ_SG_DONE |
+ PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS |
+ PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS,
+
+ /* PORT_CMD bits */
+ PORT_CMD_ASP = (1 << 27), /* Aggressive Slumber/Partial */
+ PORT_CMD_ALPE = (1 << 26), /* Aggressive Link PM enable */
+ PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */
+ PORT_CMD_PMP = (1 << 17), /* PMP attached */
+ PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */
+ PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */
+ PORT_CMD_FIS_RX = (1 << 4), /* Enable FIS receive DMA engine */
+ PORT_CMD_CLO = (1 << 3), /* Command list override */
+ PORT_CMD_POWER_ON = (1 << 2), /* Power up device */
+ PORT_CMD_SPIN_UP = (1 << 1), /* Spin up device */
+ PORT_CMD_START = (1 << 0), /* Enable port DMA engine */
+
+ PORT_CMD_ICC_MASK = (0xf << 28), /* i/f ICC state mask */
+ PORT_CMD_ICC_ACTIVE = (0x1 << 28), /* Put i/f in active state */
+ PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */
+ PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */
+
+ /* hpriv->flags bits */
+ AHCI_HFLAG_NO_NCQ = (1 << 0),
+ AHCI_HFLAG_IGN_IRQ_IF_ERR = (1 << 1), /* ignore IRQ_IF_ERR */
+ AHCI_HFLAG_IGN_SERR_INTERNAL = (1 << 2), /* ignore SERR_INTERNAL */
+ AHCI_HFLAG_32BIT_ONLY = (1 << 3), /* force 32bit */
+ AHCI_HFLAG_MV_PATA = (1 << 4), /* PATA port */
+ AHCI_HFLAG_NO_MSI = (1 << 5), /* no PCI MSI */
+ AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */
+ AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */
+ AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */
+ AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */
+ AHCI_HFLAG_NO_SUSPEND = (1 << 10), /* don't suspend */
+ AHCI_HFLAG_SRST_TOUT_IS_OFFLINE = (1 << 11), /* treat SRST timeout as
+ link offline */
+ AHCI_HFLAG_NO_SNTF = (1 << 12), /* no sntf */
+
+ /* ap->flags bits */
+
+ AHCI_FLAG_COMMON = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
+ ATA_FLAG_ACPI_SATA | ATA_FLAG_AN |
+ ATA_FLAG_IPM,
+
+ ICH_MAP = 0x90, /* ICH MAP register */
+
+ /* em constants */
+ EM_MAX_SLOTS = 8,
+ EM_MAX_RETRY = 5,
+
+ /* em_ctl bits */
+ EM_CTL_RST = (1 << 9), /* Reset */
+ EM_CTL_TM = (1 << 8), /* Transmit Message */
+ EM_CTL_ALHD = (1 << 26), /* Activity LED */
+};
+
+struct ahci_cmd_hdr {
+ __le32 opts;
+ __le32 status;
+ __le32 tbl_addr;
+ __le32 tbl_addr_hi;
+ __le32 reserved[4];
+};
+
+struct ahci_sg {
+ __le32 addr;
+ __le32 addr_hi;
+ __le32 reserved;
+ __le32 flags_size;
+};
+
+struct ahci_em_priv {
+ enum sw_activity blink_policy;
+ struct timer_list timer;
+ unsigned long saved_activity;
+ unsigned long activity;
+ unsigned long led_state;
+};
+
+struct ahci_port_priv {
+ struct ata_link *active_link;
+ struct ahci_cmd_hdr *cmd_slot;
+ dma_addr_t cmd_slot_dma;
+ void *cmd_tbl;
+ dma_addr_t cmd_tbl_dma;
+ void *rx_fis;
+ dma_addr_t rx_fis_dma;
+ /* for NCQ spurious interrupt analysis */
+ unsigned int ncq_saw_d2h:1;
+ unsigned int ncq_saw_dmas:1;
+ unsigned int ncq_saw_sdb:1;
+ u32 intr_mask; /* interrupts to enable */
+ /* enclosure management info per PM slot */
+ struct ahci_em_priv em_priv[EM_MAX_SLOTS];
+};
+
+struct ahci_host_priv {
+ void __iomem * mmio; /* bus-independant mem map */
+ unsigned int flags; /* AHCI_HFLAG_* */
+ u32 cap; /* cap to use */
+ u32 cap2; /* cap2 to use */
+ u32 port_map; /* port map to use */
+ u32 saved_cap; /* saved initial cap */
+ u32 saved_cap2; /* saved initial cap2 */
+ u32 saved_port_map; /* saved initial port_map */
+ u32 em_loc; /* enclosure management location */
+};
+
+extern int ahci_em_messages;
+extern int ahci_ignore_sss;
+
+extern struct scsi_host_template ahci_sht;
+extern struct ata_port_operations ahci_ops;
+
+void ahci_save_initial_config(struct device *dev,
+ struct ahci_host_priv *hpriv,
+ unsigned int force_port_map,
+ unsigned int mask_port_map);
+void ahci_init_controller(struct ata_host *host);
+int ahci_reset_controller(struct ata_host *host);
+
+int ahci_do_softreset(struct ata_link *link, unsigned int *class,
+ int pmp, unsigned long deadline,
+ int (*check_ready)(struct ata_link *link));
+
+int ahci_stop_engine(struct ata_port *ap);
+void ahci_start_engine(struct ata_port *ap);
+int ahci_check_ready(struct ata_link *link);
+int ahci_kick_engine(struct ata_port *ap);
+void ahci_set_em_messages(struct ahci_host_priv *hpriv,
+ struct ata_port_info *pi);
+int ahci_reset_em(struct ata_host *host);
+irqreturn_t ahci_interrupt(int irq, void *dev_instance);
+void ahci_print_info(struct ata_host *host, const char *scc_s);
+
+static inline void __iomem *__ahci_port_base(struct ata_host *host,
+ unsigned int port_no)
+{
+ struct ahci_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = hpriv->mmio;
+
+ return mmio + 0x100 + (port_no * 0x80);
+}
+
+static inline void __iomem *ahci_port_base(struct ata_port *ap)
+{
+ return __ahci_port_base(ap->host, ap->port_no);
+}
+
+static inline int ahci_nr_ports(u32 cap)
+{
+ return (cap & 0x1f) + 1;
+}
diff --git a/drivers/ata/ahci_pci.c b/drivers/ata/ahci_pci.c
new file mode 100644
index 0000000..2034061
--- /dev/null
+++ b/drivers/ata/ahci_pci.c
@@ -0,0 +1,1175 @@
+/*
+ * ahci.c - AHCI SATA support
+ *
+ * Maintained by: Jeff Garzik <jgarzik@pobox.com>
+ * Please ALWAYS copy linux-ide@vger.kernel.org
+ * on emails.
+ *
+ * Copyright 2004-2005 Red Hat, Inc.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ * libata documentation is available via 'make {ps|pdf}docs',
+ * as Documentation/DocBook/libata.*
+ *
+ * AHCI hardware documentation:
+ * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf
+ * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/device.h>
+#include <linux/dmi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
+#include <linux/libata.h>
+#include "ahci.h"
+
+#define DRV_VERSION "3.0"
+
+#if defined(CONFIG_PATA_MARVELL) || defined(CONFIG_PATA_MARVELL_MODULE)
+static int marvell_enable;
+#else
+static int marvell_enable = 1;
+#endif
+module_param(marvell_enable, int, 0644);
+MODULE_PARM_DESC(marvell_enable, "Marvell SATA via AHCI (1 = enabled)");
+
+enum {
+ AHCI_PCI_BAR = 5,
+};
+
+static void ahci_pci_save_initial_config(struct pci_dev *pdev,
+ struct ahci_host_priv *hpriv)
+{
+ unsigned int force_port_map = 0;
+ unsigned int mask_port_map = 0;
+
+ if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361) {
+ dev_info(&pdev->dev, "JMB361 has only one port\n");
+ force_port_map = 1;
+ }
+
+ /*
+ * Temporary Marvell 6145 hack: PATA port presence
+ * is asserted through the standard AHCI port
+ * presence register, as bit 4 (counting from 0)
+ */
+ if (hpriv->flags & AHCI_HFLAG_MV_PATA) {
+ if (pdev->device == 0x6121)
+ mask_port_map = 0x3;
+ else
+ mask_port_map = 0xf;
+ dev_info(&pdev->dev,
+ "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n");
+ }
+
+ ahci_save_initial_config(&pdev->dev, hpriv, force_port_map,
+ mask_port_map);
+}
+
+static void ahci_pci_init_controller(struct ata_host *host)
+{
+ struct ahci_host_priv *hpriv = host->private_data;
+ struct pci_dev *pdev = to_pci_dev(host->dev);
+ void __iomem *port_mmio;
+ u32 tmp;
+ int mv;
+
+ if (hpriv->flags & AHCI_HFLAG_MV_PATA) {
+ if (pdev->device == 0x6121)
+ mv = 2;
+ else
+ mv = 4;
+ port_mmio = __ahci_port_base(host, mv);
+
+ writel(0, port_mmio + PORT_IRQ_MASK);
+
+ /* clear port IRQ */
+ tmp = readl(port_mmio + PORT_IRQ_STAT);
+ VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
+ if (tmp)
+ writel(tmp, port_mmio + PORT_IRQ_STAT);
+ }
+
+ ahci_init_controller(host);
+}
+
+static int ahci_pci_reset_controller(struct ata_host *host)
+{
+ struct pci_dev *pdev = to_pci_dev(host->dev);
+
+ ahci_reset_controller(host);
+
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
+ struct ahci_host_priv *hpriv = host->private_data;
+ u16 tmp16;
+
+ /* configure PCS */
+ pci_read_config_word(pdev, 0x92, &tmp16);
+ if ((tmp16 & hpriv->port_map) != hpriv->port_map) {
+ tmp16 |= hpriv->port_map;
+ pci_write_config_word(pdev, 0x92, tmp16);
+ }
+ }
+
+ return 0;
+}
+
+static int ahci_sb600_check_ready(struct ata_link *link)
+{
+ void __iomem *port_mmio = ahci_port_base(link->ap);
+ u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
+ u32 irq_status = readl(port_mmio + PORT_IRQ_STAT);
+
+ /*
+ * There is no need to check TFDATA if BAD PMP is found due to HW bug,
+ * which can save timeout delay.
+ */
+ if (irq_status & PORT_IRQ_BAD_PMP)
+ return -EIO;
+
+ return ata_check_ready(status);
+}
+
+static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ struct ata_port *ap = link->ap;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ int pmp = sata_srst_pmp(link);
+ int rc;
+ u32 irq_sts;
+
+ DPRINTK("ENTER\n");
+
+ rc = ahci_do_softreset(link, class, pmp, deadline,
+ ahci_sb600_check_ready);
+
+ /*
+ * Soft reset fails on some ATI chips with IPMS set when PMP
+ * is enabled but SATA HDD/ODD is connected to SATA port,
+ * do soft reset again to port 0.
+ */
+ if (rc == -EIO) {
+ irq_sts = readl(port_mmio + PORT_IRQ_STAT);
+ if (irq_sts & PORT_IRQ_BAD_PMP) {
+ ata_link_printk(link, KERN_WARNING,
+ "applying SB600 PMP SRST workaround "
+ "and retrying\n");
+ rc = ahci_do_softreset(link, class, 0, deadline,
+ ahci_check_ready);
+ }
+ }
+
+ return rc;
+}
+
+static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ struct ata_port *ap = link->ap;
+ bool online;
+ int rc;
+
+ DPRINTK("ENTER\n");
+
+ ahci_stop_engine(ap);
+
+ rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
+ deadline, &online, NULL);
+
+ ahci_start_engine(ap);
+
+ DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
+
+ /* vt8251 doesn't clear BSY on signature FIS reception,
+ * request follow-up softreset.
+ */
+ return online ? -EAGAIN : rc;
+}
+
+static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ struct ata_port *ap = link->ap;
+ struct ahci_port_priv *pp = ap->private_data;
+ u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
+ struct ata_taskfile tf;
+ bool online;
+ int rc;
+
+ ahci_stop_engine(ap);
+
+ /* clear D2H reception area to properly wait for D2H FIS */
+ ata_tf_init(link->device, &tf);
+ tf.command = 0x80;
+ ata_tf_to_fis(&tf, 0, 0, d2h_fis);
+
+ rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
+ deadline, &online, NULL);
+
+ ahci_start_engine(ap);
+
+ /* The pseudo configuration device on SIMG4726 attached to
+ * ASUS P5W-DH Deluxe doesn't send signature FIS after
+ * hardreset if no device is attached to the first downstream
+ * port && the pseudo device locks up on SRST w/ PMP==0. To
+ * work around this, wait for !BSY only briefly. If BSY isn't
+ * cleared, perform CLO and proceed to IDENTIFY (achieved by
+ * ATA_LFLAG_NO_SRST and ATA_LFLAG_ASSUME_ATA).
+ *
+ * Wait for two seconds. Devices attached to downstream port
+ * which can't process the following IDENTIFY after this will
+ * have to be reset again. For most cases, this should
+ * suffice while making probing snappish enough.
+ */
+ if (online) {
+ rc = ata_wait_after_reset(link, jiffies + 2 * HZ,
+ ahci_check_ready);
+ if (rc)
+ ahci_kick_engine(ap);
+ }
+ return rc;
+}
+
+#ifdef CONFIG_PM
+static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = hpriv->mmio;
+ u32 ctl;
+
+ if (mesg.event & PM_EVENT_SUSPEND &&
+ hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "BIOS update required for suspend/resume\n");
+ return -EIO;
+ }
+
+ if (mesg.event & PM_EVENT_SLEEP) {
+ /* AHCI spec rev1.1 section 8.3.3:
+ * Software must disable interrupts prior to requesting a
+ * transition of the HBA to D3 state.
+ */
+ ctl = readl(mmio + HOST_CTL);
+ ctl &= ~HOST_IRQ_EN;
+ writel(ctl, mmio + HOST_CTL);
+ readl(mmio + HOST_CTL); /* flush */
+ }
+
+ return ata_pci_device_suspend(pdev, mesg);
+}
+
+static int ahci_pci_device_resume(struct pci_dev *pdev)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ int rc;
+
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
+
+ if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
+ rc = ahci_pci_reset_controller(host);
+ if (rc)
+ return rc;
+
+ ahci_pci_init_controller(host);
+ }
+
+ ata_host_resume(host);
+
+ return 0;
+}
+#endif
+
+static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
+{
+ int rc;
+
+ if (using_dac &&
+ !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
+ rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (rc) {
+ rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "64-bit DMA enable failed\n");
+ return rc;
+ }
+ }
+ } else {
+ rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit DMA enable failed\n");
+ return rc;
+ }
+ rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit consistent DMA enable failed\n");
+ return rc;
+ }
+ }
+ return 0;
+}
+
+static void ahci_pci_print_info(struct ata_host *host)
+{
+ struct pci_dev *pdev = to_pci_dev(host->dev);
+ u16 cc;
+ const char *scc_s;
+
+ pci_read_config_word(pdev, 0x0a, &cc);
+ if (cc == PCI_CLASS_STORAGE_IDE)
+ scc_s = "IDE";
+ else if (cc == PCI_CLASS_STORAGE_SATA)
+ scc_s = "SATA";
+ else if (cc == PCI_CLASS_STORAGE_RAID)
+ scc_s = "RAID";
+ else
+ scc_s = "unknown";
+
+ ahci_print_info(host, scc_s);
+}
+
+static struct ata_port_operations ahci_vt8251_ops = {
+ .inherits = &ahci_ops,
+ .hardreset = ahci_vt8251_hardreset,
+};
+
+static struct ata_port_operations ahci_p5wdh_ops = {
+ .inherits = &ahci_ops,
+ .hardreset = ahci_p5wdh_hardreset,
+};
+
+static struct ata_port_operations ahci_sb600_ops = {
+ .inherits = &ahci_ops,
+ .softreset = ahci_sb600_softreset,
+ .pmp_softreset = ahci_sb600_softreset,
+};
+
+/* On ASUS P5W DH Deluxe, the second port of PCI device 00:1f.2 is
+ * hardwired to on-board SIMG 4726. The chipset is ICH8 and doesn't
+ * support PMP and the 4726 either directly exports the device
+ * attached to the first downstream port or acts as a hardware storage
+ * controller and emulate a single ATA device (can be RAID 0/1 or some
+ * other configuration).
+ *
+ * When there's no device attached to the first downstream port of the
+ * 4726, "Config Disk" appears, which is a pseudo ATA device to
+ * configure the 4726. However, ATA emulation of the device is very
+ * lame. It doesn't send signature D2H Reg FIS after the initial
+ * hardreset, pukes on SRST w/ PMP==0 and has bunch of other issues.
+ *
+ * The following function works around the problem by always using
+ * hardreset on the port and not depending on receiving signature FIS
+ * afterward. If signature FIS isn't received soon, ATA class is
+ * assumed without follow-up softreset.
+ */
+static void ahci_p5wdh_workaround(struct ata_host *host)
+{
+ static struct dmi_system_id sysids[] = {
+ {
+ .ident = "P5W DH Deluxe",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR,
+ "ASUSTEK COMPUTER INC"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "P5W DH Deluxe"),
+ },
+ },
+ { }
+ };
+ struct pci_dev *pdev = to_pci_dev(host->dev);
+
+ if (pdev->bus->number == 0 && pdev->devfn == PCI_DEVFN(0x1f, 2) &&
+ dmi_check_system(sysids)) {
+ struct ata_port *ap = host->ports[1];
+
+ dev_printk(KERN_INFO, &pdev->dev, "enabling ASUS P5W DH "
+ "Deluxe on-board SIMG4726 workaround\n");
+
+ ap->ops = &ahci_p5wdh_ops;
+ ap->link.flags |= ATA_LFLAG_NO_SRST | ATA_LFLAG_ASSUME_ATA;
+ }
+}
+
+/* only some SB600 ahci controllers can do 64bit DMA */
+static bool ahci_sb600_enable_64bit(struct pci_dev *pdev)
+{
+ static const struct dmi_system_id sysids[] = {
+ /*
+ * The oldest version known to be broken is 0901 and
+ * working is 1501 which was released on 2007-10-26.
+ * Enable 64bit DMA on 1501 and anything newer.
+ *
+ * Please read bko#9412 for more info.
+ */
+ {
+ .ident = "ASUS M2A-VM",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR,
+ "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "M2A-VM"),
+ },
+ .driver_data = "20071026", /* yyyymmdd */
+ },
+ /*
+ * All BIOS versions for the MSI K9A2 Platinum (MS-7376)
+ * support 64bit DMA.
+ *
+ * BIOS versions earlier than 1.5 had the Manufacturer DMI
+ * fields as "MICRO-STAR INTERANTIONAL CO.,LTD".
+ * This spelling mistake was fixed in BIOS version 1.5, so
+ * 1.5 and later have the Manufacturer as
+ * "MICRO-STAR INTERNATIONAL CO.,LTD".
+ * So try to match on DMI_BOARD_VENDOR of "MICRO-STAR INTER".
+ *
+ * BIOS versions earlier than 1.9 had a Board Product Name
+ * DMI field of "MS-7376". This was changed to be
+ * "K9A2 Platinum (MS-7376)" in version 1.9, but we can still
+ * match on DMI_BOARD_NAME of "MS-7376".
+ */
+ {
+ .ident = "MSI K9A2 Platinum",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR,
+ "MICRO-STAR INTER"),
+ DMI_MATCH(DMI_BOARD_NAME, "MS-7376"),
+ },
+ },
+ { }
+ };
+ const struct dmi_system_id *match;
+ int year, month, date;
+ char buf[9];
+
+ match = dmi_first_match(sysids);
+ if (pdev->bus->number != 0 || pdev->devfn != PCI_DEVFN(0x12, 0) ||
+ !match)
+ return false;
+
+ if (!match->driver_data)
+ goto enable_64bit;
+
+ dmi_get_date(DMI_BIOS_DATE, &year, &month, &date);
+ snprintf(buf, sizeof(buf), "%04d%02d%02d", year, month, date);
+
+ if (strcmp(buf, match->driver_data) >= 0)
+ goto enable_64bit;
+ else {
+ dev_printk(KERN_WARNING, &pdev->dev, "%s: BIOS too old, "
+ "forcing 32bit DMA, update BIOS\n", match->ident);
+ return false;
+ }
+
+enable_64bit:
+ dev_printk(KERN_WARNING, &pdev->dev, "%s: enabling 64bit DMA\n",
+ match->ident);
+ return true;
+}
+
+static bool ahci_broken_system_poweroff(struct pci_dev *pdev)
+{
+ static const struct dmi_system_id broken_systems[] = {
+ {
+ .ident = "HP Compaq nx6310",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6310"),
+ },
+ /* PCI slot number of the controller */
+ .driver_data = (void *)0x1FUL,
+ },
+ {
+ .ident = "HP Compaq 6720s",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6720s"),
+ },
+ /* PCI slot number of the controller */
+ .driver_data = (void *)0x1FUL,
+ },
+
+ { } /* terminate list */
+ };
+ const struct dmi_system_id *dmi = dmi_first_match(broken_systems);
+
+ if (dmi) {
+ unsigned long slot = (unsigned long)dmi->driver_data;
+ /* apply the quirk only to on-board controllers */
+ return slot == PCI_SLOT(pdev->devfn);
+ }
+
+ return false;
+}
+
+static bool ahci_broken_suspend(struct pci_dev *pdev)
+{
+ static const struct dmi_system_id sysids[] = {
+ /*
+ * On HP dv[4-6] and HDX18 with earlier BIOSen, link
+ * to the harddisk doesn't become online after
+ * resuming from STR. Warn and fail suspend.
+ */
+ {
+ .ident = "dv4",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME,
+ "HP Pavilion dv4 Notebook PC"),
+ },
+ .driver_data = "F.30", /* cutoff BIOS version */
+ },
+ {
+ .ident = "dv5",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME,
+ "HP Pavilion dv5 Notebook PC"),
+ },
+ .driver_data = "F.16", /* cutoff BIOS version */
+ },
+ {
+ .ident = "dv6",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME,
+ "HP Pavilion dv6 Notebook PC"),
+ },
+ .driver_data = "F.21", /* cutoff BIOS version */
+ },
+ {
+ .ident = "HDX18",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME,
+ "HP HDX18 Notebook PC"),
+ },
+ .driver_data = "F.23", /* cutoff BIOS version */
+ },
+ /*
+ * Acer eMachines G725 has the same problem. BIOS
+ * V1.03 is known to be broken. V3.04 is known to
+ * work. Inbetween, there are V1.06, V2.06 and V3.03
+ * that we don't have much idea about. For now,
+ * blacklist anything older than V3.04.
+ */
+ {
+ .ident = "G725",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "eMachines"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "eMachines G725"),
+ },
+ .driver_data = "V3.04", /* cutoff BIOS version */
+ },
+ { } /* terminate list */
+ };
+ const struct dmi_system_id *dmi = dmi_first_match(sysids);
+ const char *ver;
+
+ if (!dmi || pdev->bus->number || pdev->devfn != PCI_DEVFN(0x1f, 2))
+ return false;
+
+ ver = dmi_get_system_info(DMI_BIOS_VERSION);
+
+ return !ver || strcmp(ver, dmi->driver_data) < 0;
+}
+
+static bool ahci_broken_online(struct pci_dev *pdev)
+{
+#define ENCODE_BUSDEVFN(bus, slot, func) \
+ (void *)(unsigned long)(((bus) << 8) | PCI_DEVFN((slot), (func)))
+ static const struct dmi_system_id sysids[] = {
+ /*
+ * There are several gigabyte boards which use
+ * SIMG5723s configured as hardware RAID. Certain
+ * 5723 firmware revisions shipped there keep the link
+ * online but fail to answer properly to SRST or
+ * IDENTIFY when no device is attached downstream
+ * causing libata to retry quite a few times leading
+ * to excessive detection delay.
+ *
+ * As these firmwares respond to the second reset try
+ * with invalid device signature, considering unknown
+ * sig as offline works around the problem acceptably.
+ */
+ {
+ .ident = "EP45-DQ6",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR,
+ "Gigabyte Technology Co., Ltd."),
+ DMI_MATCH(DMI_BOARD_NAME, "EP45-DQ6"),
+ },
+ .driver_data = ENCODE_BUSDEVFN(0x0a, 0x00, 0),
+ },
+ {
+ .ident = "EP45-DS5",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR,
+ "Gigabyte Technology Co., Ltd."),
+ DMI_MATCH(DMI_BOARD_NAME, "EP45-DS5"),
+ },
+ .driver_data = ENCODE_BUSDEVFN(0x03, 0x00, 0),
+ },
+ { } /* terminate list */
+ };
+#undef ENCODE_BUSDEVFN
+ const struct dmi_system_id *dmi = dmi_first_match(sysids);
+ unsigned int val;
+
+ if (!dmi)
+ return false;
+
+ val = (unsigned long)dmi->driver_data;
+
+ return pdev->bus->number == (val >> 8) && pdev->devfn == (val & 0xff);
+}
+
+#ifdef CONFIG_ATA_ACPI
+static void ahci_gtf_filter_workaround(struct ata_host *host)
+{
+ static const struct dmi_system_id sysids[] = {
+ /*
+ * Aspire 3810T issues a bunch of SATA enable commands
+ * via _GTF including an invalid one and one which is
+ * rejected by the device. Among the successful ones
+ * is FPDMA non-zero offset enable which when enabled
+ * only on the drive side leads to NCQ command
+ * failures. Filter it out.
+ */
+ {
+ .ident = "Aspire 3810T",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 3810T"),
+ },
+ .driver_data = (void *)ATA_ACPI_FILTER_FPDMA_OFFSET,
+ },
+ { }
+ };
+ const struct dmi_system_id *dmi = dmi_first_match(sysids);
+ unsigned int filter;
+ int i;
+
+ if (!dmi)
+ return;
+
+ filter = (unsigned long)dmi->driver_data;
+ dev_printk(KERN_INFO, host->dev,
+ "applying extra ACPI _GTF filter 0x%x for %s\n",
+ filter, dmi->ident);
+
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap = host->ports[i];
+ struct ata_link *link;
+ struct ata_device *dev;
+
+ ata_for_each_link(link, ap, EDGE)
+ ata_for_each_dev(dev, link, ALL)
+ dev->gtf_filter |= filter;
+ }
+}
+#else
+static inline void ahci_gtf_filter_workaround(struct ata_host *host)
+{}
+#endif
+
+enum {
+ board_ahci = 0,
+ board_ahci_vt8251 = 1,
+ board_ahci_ign_iferr = 2,
+ board_ahci_sb600 = 3,
+ board_ahci_mv = 4,
+ board_ahci_sb700 = 5, /* for SB700 and SB800 */
+ board_ahci_mcp65 = 6,
+ board_ahci_nopmp = 7,
+ board_ahci_yesncq = 8,
+ board_ahci_nosntf = 9,
+};
+
+#define AHCI_HFLAGS(flags) .private_data = (void *)(flags)
+
+static const struct ata_port_info ahci_port_info[] = {
+ [board_ahci] =
+ {
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_ops,
+ },
+ [board_ahci_vt8251] =
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_PMP),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_vt8251_ops,
+ },
+ [board_ahci_ign_iferr] =
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_IGN_IRQ_IF_ERR),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_ops,
+ },
+ [board_ahci_sb600] =
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL |
+ AHCI_HFLAG_NO_MSI | AHCI_HFLAG_SECT255 |
+ AHCI_HFLAG_32BIT_ONLY),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_sb600_ops,
+ },
+ [board_ahci_mv] =
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI |
+ AHCI_HFLAG_MV_PATA | AHCI_HFLAG_NO_PMP),
+ .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_ops,
+ },
+ [board_ahci_sb700] = /* for SB700 and SB800 */
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_sb600_ops,
+ },
+ [board_ahci_mcp65] =
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_ops,
+ },
+ [board_ahci_nopmp] =
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_NO_PMP),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_ops,
+ },
+ [board_ahci_yesncq] =
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_ops,
+ },
+ [board_ahci_nosntf] =
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_NO_SNTF),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_ops,
+ },
+};
+
+static const struct pci_device_id ahci_pci_tbl[] = {
+ /* Intel */
+ { PCI_VDEVICE(INTEL, 0x2652), board_ahci }, /* ICH6 */
+ { PCI_VDEVICE(INTEL, 0x2653), board_ahci }, /* ICH6M */
+ { PCI_VDEVICE(INTEL, 0x27c1), board_ahci }, /* ICH7 */
+ { PCI_VDEVICE(INTEL, 0x27c5), board_ahci }, /* ICH7M */
+ { PCI_VDEVICE(INTEL, 0x27c3), board_ahci }, /* ICH7R */
+ { PCI_VDEVICE(AL, 0x5288), board_ahci_ign_iferr }, /* ULi M5288 */
+ { PCI_VDEVICE(INTEL, 0x2681), board_ahci }, /* ESB2 */
+ { PCI_VDEVICE(INTEL, 0x2682), board_ahci }, /* ESB2 */
+ { PCI_VDEVICE(INTEL, 0x2683), board_ahci }, /* ESB2 */
+ { PCI_VDEVICE(INTEL, 0x27c6), board_ahci }, /* ICH7-M DH */
+ { PCI_VDEVICE(INTEL, 0x2821), board_ahci }, /* ICH8 */
+ { PCI_VDEVICE(INTEL, 0x2822), board_ahci_nosntf }, /* ICH8 */
+ { PCI_VDEVICE(INTEL, 0x2824), board_ahci }, /* ICH8 */
+ { PCI_VDEVICE(INTEL, 0x2829), board_ahci }, /* ICH8M */
+ { PCI_VDEVICE(INTEL, 0x282a), board_ahci }, /* ICH8M */
+ { PCI_VDEVICE(INTEL, 0x2922), board_ahci }, /* ICH9 */
+ { PCI_VDEVICE(INTEL, 0x2923), board_ahci }, /* ICH9 */
+ { PCI_VDEVICE(INTEL, 0x2924), board_ahci }, /* ICH9 */
+ { PCI_VDEVICE(INTEL, 0x2925), board_ahci }, /* ICH9 */
+ { PCI_VDEVICE(INTEL, 0x2927), board_ahci }, /* ICH9 */
+ { PCI_VDEVICE(INTEL, 0x2929), board_ahci }, /* ICH9M */
+ { PCI_VDEVICE(INTEL, 0x292a), board_ahci }, /* ICH9M */
+ { PCI_VDEVICE(INTEL, 0x292b), board_ahci }, /* ICH9M */
+ { PCI_VDEVICE(INTEL, 0x292c), board_ahci }, /* ICH9M */
+ { PCI_VDEVICE(INTEL, 0x292f), board_ahci }, /* ICH9M */
+ { PCI_VDEVICE(INTEL, 0x294d), board_ahci }, /* ICH9 */
+ { PCI_VDEVICE(INTEL, 0x294e), board_ahci }, /* ICH9M */
+ { PCI_VDEVICE(INTEL, 0x502a), board_ahci }, /* Tolapai */
+ { PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */
+ { PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */
+ { PCI_VDEVICE(INTEL, 0x3a22), board_ahci }, /* ICH10 */
+ { PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */
+ { PCI_VDEVICE(INTEL, 0x3b22), board_ahci }, /* PCH AHCI */
+ { PCI_VDEVICE(INTEL, 0x3b23), board_ahci }, /* PCH AHCI */
+ { PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */
+ { PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */
+ { PCI_VDEVICE(INTEL, 0x3b29), board_ahci }, /* PCH AHCI */
+ { PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */
+ { PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */
+ { PCI_VDEVICE(INTEL, 0x3b2f), board_ahci }, /* PCH AHCI */
+
+ /* JMicron 360/1/3/5/6, match class to avoid IDE function */
+ { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci_ign_iferr },
+
+ /* ATI */
+ { PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */
+ { PCI_VDEVICE(ATI, 0x4390), board_ahci_sb700 }, /* ATI SB700/800 */
+ { PCI_VDEVICE(ATI, 0x4391), board_ahci_sb700 }, /* ATI SB700/800 */
+ { PCI_VDEVICE(ATI, 0x4392), board_ahci_sb700 }, /* ATI SB700/800 */
+ { PCI_VDEVICE(ATI, 0x4393), board_ahci_sb700 }, /* ATI SB700/800 */
+ { PCI_VDEVICE(ATI, 0x4394), board_ahci_sb700 }, /* ATI SB700/800 */
+ { PCI_VDEVICE(ATI, 0x4395), board_ahci_sb700 }, /* ATI SB700/800 */
+
+ /* AMD */
+ { PCI_VDEVICE(AMD, 0x7800), board_ahci }, /* AMD Hudson-2 */
+ /* AMD is using RAID class only for ahci controllers */
+ { PCI_VENDOR_ID_AMD, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_RAID << 8, 0xffffff, board_ahci },
+
+ /* VIA */
+ { PCI_VDEVICE(VIA, 0x3349), board_ahci_vt8251 }, /* VIA VT8251 */
+ { PCI_VDEVICE(VIA, 0x6287), board_ahci_vt8251 }, /* VIA VT8251 */
+
+ /* NVIDIA */
+ { PCI_VDEVICE(NVIDIA, 0x044c), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x044d), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x044e), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x044f), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x045c), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x045d), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x045e), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x045f), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x0550), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0551), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0552), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0553), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0554), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0555), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0556), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0557), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0558), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0559), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x055a), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x055b), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0580), board_ahci_yesncq }, /* Linux ID */
+ { PCI_VDEVICE(NVIDIA, 0x07f0), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f1), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f2), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f3), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f4), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f5), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f6), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f7), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f8), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f9), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07fa), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07fb), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad0), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad1), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad2), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad3), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad4), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad5), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad6), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad7), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad8), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad9), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ada), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0adb), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ab4), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0ab5), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0ab6), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0ab7), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0ab8), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0ab9), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0aba), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0abb), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0abc), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0abd), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0abe), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0abf), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0d84), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d85), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d86), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d87), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d88), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d89), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8a), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8b), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8c), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8d), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8e), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8f), board_ahci }, /* MCP89 */
+
+ /* SiS */
+ { PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */
+ { PCI_VDEVICE(SI, 0x1185), board_ahci }, /* SiS 968 */
+ { PCI_VDEVICE(SI, 0x0186), board_ahci }, /* SiS 968 */
+
+ /* Marvell */
+ { PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */
+ { PCI_VDEVICE(MARVELL, 0x6121), board_ahci_mv }, /* 6121 */
+
+ /* Promise */
+ { PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */
+
+ /* Generic, PCI class code for AHCI */
+ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci },
+
+ { } /* terminate list */
+};
+
+static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ static int printed_version;
+ unsigned int board_id = ent->driver_data;
+ struct ata_port_info pi = ahci_port_info[board_id];
+ const struct ata_port_info *ppi[] = { &pi, NULL };
+ struct device *dev = &pdev->dev;
+ struct ahci_host_priv *hpriv;
+ struct ata_host *host;
+ int n_ports, i, rc;
+
+ VPRINTK("ENTER\n");
+
+ WARN_ON(ATA_MAX_QUEUE > AHCI_MAX_CMDS);
+
+ if (!printed_version++)
+ dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+
+ /* The AHCI driver can only drive the SATA ports, the PATA driver
+ can drive them all so if both drivers are selected make sure
+ AHCI stays out of the way */
+ if (pdev->vendor == PCI_VENDOR_ID_MARVELL && !marvell_enable)
+ return -ENODEV;
+
+ /* Promise's PDC42819 is a SAS/SATA controller that has an AHCI mode.
+ * At the moment, we can only use the AHCI mode. Let the users know
+ * that for SAS drives they're out of luck.
+ */
+ if (pdev->vendor == PCI_VENDOR_ID_PROMISE)
+ dev_printk(KERN_INFO, &pdev->dev, "PDC42819 "
+ "can only drive SATA devices with this driver\n");
+
+ /* acquire resources */
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
+
+ /* AHCI controllers often implement SFF compatible interface.
+ * Grab all PCI BARs just in case.
+ */
+ rc = pcim_iomap_regions_request_all(pdev, 1 << AHCI_PCI_BAR, DRV_NAME);
+ if (rc == -EBUSY)
+ pcim_pin_device(pdev);
+ if (rc)
+ return rc;
+
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+ (pdev->device == 0x2652 || pdev->device == 0x2653)) {
+ u8 map;
+
+ /* ICH6s share the same PCI ID for both piix and ahci
+ * modes. Enabling ahci mode while MAP indicates
+ * combined mode is a bad idea. Yield to ata_piix.
+ */
+ pci_read_config_byte(pdev, ICH_MAP, &map);
+ if (map & 0x3) {
+ dev_printk(KERN_INFO, &pdev->dev, "controller is in "
+ "combined mode, can't enable AHCI mode\n");
+ return -ENODEV;
+ }
+ }
+
+ hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
+ if (!hpriv)
+ return -ENOMEM;
+ hpriv->flags |= (unsigned long)pi.private_data;
+
+ /* MCP65 revision A1 and A2 can't do MSI */
+ if (board_id == board_ahci_mcp65 &&
+ (pdev->revision == 0xa1 || pdev->revision == 0xa2))
+ hpriv->flags |= AHCI_HFLAG_NO_MSI;
+
+ /* SB800 does NOT need the workaround to ignore SERR_INTERNAL */
+ if (board_id == board_ahci_sb700 && pdev->revision >= 0x40)
+ hpriv->flags &= ~AHCI_HFLAG_IGN_SERR_INTERNAL;
+
+ /* only some SB600s can do 64bit DMA */
+ if (ahci_sb600_enable_64bit(pdev))
+ hpriv->flags &= ~AHCI_HFLAG_32BIT_ONLY;
+
+ if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev))
+ pci_intx(pdev, 1);
+
+ hpriv->mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
+
+ /* save initial config */
+ ahci_pci_save_initial_config(pdev, hpriv);
+
+ /* prepare host */
+ if (hpriv->cap & HOST_CAP_NCQ) {
+ pi.flags |= ATA_FLAG_NCQ;
+ /* Auto-activate optimization is supposed to be supported on
+ all AHCI controllers indicating NCQ support, but it seems
+ to be broken at least on some NVIDIA MCP79 chipsets.
+ Until we get info on which NVIDIA chipsets don't have this
+ issue, if any, disable AA on all NVIDIA AHCIs. */
+ if (pdev->vendor != PCI_VENDOR_ID_NVIDIA)
+ pi.flags |= ATA_FLAG_FPDMA_AA;
+ }
+
+ if (hpriv->cap & HOST_CAP_PMP)
+ pi.flags |= ATA_FLAG_PMP;
+
+ ahci_set_em_messages(hpriv, &pi);
+
+ if (ahci_broken_system_poweroff(pdev)) {
+ pi.flags |= ATA_FLAG_NO_POWEROFF_SPINDOWN;
+ dev_info(&pdev->dev,
+ "quirky BIOS, skipping spindown on poweroff\n");
+ }
+
+ if (ahci_broken_suspend(pdev)) {
+ hpriv->flags |= AHCI_HFLAG_NO_SUSPEND;
+ dev_printk(KERN_WARNING, &pdev->dev,
+ "BIOS update required for suspend/resume\n");
+ }
+
+ if (ahci_broken_online(pdev)) {
+ hpriv->flags |= AHCI_HFLAG_SRST_TOUT_IS_OFFLINE;
+ dev_info(&pdev->dev,
+ "online status unreliable, applying workaround\n");
+ }
+
+ /* CAP.NP sometimes indicate the index of the last enabled
+ * port, at other times, that of the last possible port, so
+ * determining the maximum port number requires looking at
+ * both CAP.NP and port_map.
+ */
+ n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
+
+ host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
+ if (!host)
+ return -ENOMEM;
+ host->private_data = hpriv;
+
+ if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
+ host->flags |= ATA_HOST_PARALLEL_SCAN;
+ else
+ printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n");
+
+ if (pi.flags & ATA_FLAG_EM)
+ ahci_reset_em(host);
+
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap = host->ports[i];
+
+ ata_port_pbar_desc(ap, AHCI_PCI_BAR, -1, "abar");
+ ata_port_pbar_desc(ap, AHCI_PCI_BAR,
+ 0x100 + ap->port_no * 0x80, "port");
+
+ /* set initial link pm policy */
+ ap->pm_policy = NOT_AVAILABLE;
+
+ /* set enclosure management message type */
+ if (ap->flags & ATA_FLAG_EM)
+ ap->em_message_type = ahci_em_messages;
+
+
+ /* disabled/not-implemented port */
+ if (!(hpriv->port_map & (1 << i)))
+ ap->ops = &ata_dummy_port_ops;
+ }
+
+ /* apply workaround for ASUS P5W DH Deluxe mainboard */
+ ahci_p5wdh_workaround(host);
+
+ /* apply gtf filter quirk */
+ ahci_gtf_filter_workaround(host);
+
+ /* initialize adapter */
+ rc = ahci_configure_dma_masks(pdev, hpriv->cap & HOST_CAP_64);
+ if (rc)
+ return rc;
+
+ rc = ahci_pci_reset_controller(host);
+ if (rc)
+ return rc;
+
+ ahci_pci_init_controller(host);
+ ahci_pci_print_info(host);
+
+ pci_set_master(pdev);
+ return ata_host_activate(host, pdev->irq, ahci_interrupt, IRQF_SHARED,
+ &ahci_sht);
+}
+
+static struct pci_driver ahci_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = ahci_pci_tbl,
+ .probe = ahci_init_one,
+ .remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
+ .suspend = ahci_pci_device_suspend,
+ .resume = ahci_pci_device_resume,
+#endif
+};
+
+static int __init ahci_init(void)
+{
+ return pci_register_driver(&ahci_pci_driver);
+}
+
+static void __exit ahci_exit(void)
+{
+ pci_unregister_driver(&ahci_pci_driver);
+}
+
+
+MODULE_AUTHOR("Jeff Garzik");
+MODULE_DESCRIPTION("AHCI SATA low-level driver");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, ahci_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(ahci_init);
+module_exit(ahci_exit);
--
1.7.0
next prev parent reply other threads:[~2010-03-02 18:29 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-02 18:28 [PATCH RFC 0/12] ahci: Add support for non-PCI devices Anton Vorontsov
2010-03-02 18:29 ` [PATCH 01/12] ahci: Fix some sparse warnings Anton Vorontsov
2010-03-02 18:29 ` [PATCH 02/12] ahci: Get rid of host->iomap usage Anton Vorontsov
2010-03-02 18:29 ` [PATCH 03/12] ahci: Factor out PCI specifics from ahci_save_initial_config() Anton Vorontsov
2010-03-02 18:29 ` [PATCH 04/12] ahci: Get rid of pci_dev argument in ahci_save_initial_config() Anton Vorontsov
2010-03-02 18:29 ` [PATCH 05/12] ahci: Factor out PCI specifics from ahci_reset_controller() Anton Vorontsov
2010-03-02 18:29 ` [PATCH 06/12] ahci: Get rid of pci_dev argument in ahci_port_init() Anton Vorontsov
2010-03-02 18:29 ` [PATCH 07/12] ahci: Factor out PCI specifics from ahci_init_controller() Anton Vorontsov
2010-03-02 18:29 ` [PATCH 08/12] ahci: Factor out PCI specifics from ahci_print_info() Anton Vorontsov
2010-03-02 18:29 ` [PATCH 09/12] ahci: Introduce ahci_set_em_messages() Anton Vorontsov
2010-03-02 21:18 ` Sergei Shtylyov
2010-03-02 23:19 ` Jeff Garzik
2010-03-03 10:40 ` Sergei Shtylyov
2010-03-03 11:41 ` Jeff Garzik
2010-03-03 14:38 ` Greg Freemyer
2010-03-02 18:29 ` Anton Vorontsov [this message]
2010-03-02 18:29 ` [PATCH 11/12] ahci: Export generic AHCI symbols Anton Vorontsov
2010-03-02 18:29 ` [PATCH 12/12] ahci: Add platform driver Anton Vorontsov
2010-03-02 19:41 ` Sergei Shtylyov
2010-03-03 13:14 ` Anton Vorontsov
2010-03-02 21:34 ` [PATCH RFC 0/12] ahci: Add support for non-PCI devices Jeff Garzik
2010-03-03 13:15 ` Anton Vorontsov
2010-03-03 13:40 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100302182941.GJ3445@oksana.dev.rtsoft.ru \
--to=avorontsov@ru.mvista.com \
--cc=jgarzik@redhat.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.