All of lore.kernel.org
 help / color / mirror / Atom feed
From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: Jeff Garzik <jgarzik@pobox.com>
Cc: Sergei Shtylyov <sshtylyov@mvista.com>,
	linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 03/11] ahci: Get rid of pci_dev argument in ahci_save_initial_config()
Date: Wed, 3 Mar 2010 20:17:37 +0300	[thread overview]
Message-ID: <20100303171737.GC12362@oksana.dev.rtsoft.ru> (raw)
In-Reply-To: <20100303171713.GA6322@oksana.dev.rtsoft.ru>

To make the function generic we have to get rid of "struct pci_dev *",
so let's pass just a "struct devce *".

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
 drivers/ata/ahci.c |   27 +++++++++++++--------------
 1 files changed, 13 insertions(+), 14 deletions(-)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 98c9c6a..9d9af3c 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -824,7 +824,7 @@ static ssize_t ahci_show_port_cmd(struct device *dev,
 
 /**
  *	ahci_save_initial_config - Save and fixup initial config values
- *	@pdev: target PCI device
+ *	@dev: target AHCI device
  *	@hpriv: host private area to store config values
  *	@force_port_map: force port map to a specified value
  *	@mask_port_map: mask out particular bits from port map
@@ -839,7 +839,7 @@ static ssize_t ahci_show_port_cmd(struct device *dev,
  *	LOCKING:
  *	None.
  */
-static void ahci_save_initial_config(struct pci_dev *pdev,
+static void ahci_save_initial_config(struct device *dev,
 				     struct ahci_host_priv *hpriv,
 				     unsigned int force_port_map,
 				     unsigned int mask_port_map)
@@ -867,45 +867,43 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
 
 	/* some chips have errata preventing 64bit use */
 	if ((cap & HOST_CAP_64) && (hpriv->flags & AHCI_HFLAG_32BIT_ONLY)) {
-		dev_printk(KERN_INFO, &pdev->dev,
+		dev_printk(KERN_INFO, dev,
 			   "controller can't do 64bit DMA, forcing 32bit\n");
 		cap &= ~HOST_CAP_64;
 	}
 
 	if ((cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_NO_NCQ)) {
-		dev_printk(KERN_INFO, &pdev->dev,
+		dev_printk(KERN_INFO, dev,
 			   "controller can't do NCQ, turning off CAP_NCQ\n");
 		cap &= ~HOST_CAP_NCQ;
 	}
 
 	if (!(cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_YES_NCQ)) {
-		dev_printk(KERN_INFO, &pdev->dev,
+		dev_printk(KERN_INFO, dev,
 			   "controller can do NCQ, turning on CAP_NCQ\n");
 		cap |= HOST_CAP_NCQ;
 	}
 
 	if ((cap & HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) {
-		dev_printk(KERN_INFO, &pdev->dev,
+		dev_printk(KERN_INFO, dev,
 			   "controller can't do PMP, turning off CAP_PMP\n");
 		cap &= ~HOST_CAP_PMP;
 	}
 
 	if ((cap & HOST_CAP_SNTF) && (hpriv->flags & AHCI_HFLAG_NO_SNTF)) {
-		dev_printk(KERN_INFO, &pdev->dev,
+		dev_printk(KERN_INFO, dev,
 			   "controller can't do SNTF, turning off CAP_SNTF\n");
 		cap &= ~HOST_CAP_SNTF;
 	}
 
 	if (force_port_map && port_map != force_port_map) {
-		dev_printk(KERN_INFO, &pdev->dev,
-			   "forcing port_map 0x%x -> 0x%x\n",
+		dev_printk(KERN_INFO, dev, "forcing port_map 0x%x -> 0x%x\n",
 			   port_map, force_port_map);
 		port_map = force_port_map;
 	}
 
 	if (mask_port_map) {
-		dev_printk(KERN_ERR, &pdev->dev,
-			   "masking port_map 0x%x -> 0x%x\n",
+		dev_printk(KERN_ERR, dev, "masking port_map 0x%x -> 0x%x\n",
 			   port_map,
 			   port_map & mask_port_map);
 		port_map &= mask_port_map;
@@ -923,7 +921,7 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
 		 * port_map and let it be generated from n_ports.
 		 */
 		if (map_ports > ahci_nr_ports(cap)) {
-			dev_printk(KERN_WARNING, &pdev->dev,
+			dev_printk(KERN_WARNING, dev,
 				   "implemented port map (0x%x) contains more "
 				   "ports than nr_ports (%u), using nr_ports\n",
 				   port_map, ahci_nr_ports(cap));
@@ -934,7 +932,7 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
 	/* fabricate port_map from cap.nr_ports */
 	if (!port_map) {
 		port_map = (1 << ahci_nr_ports(cap)) - 1;
-		dev_printk(KERN_WARNING, &pdev->dev,
+		dev_printk(KERN_WARNING, dev,
 			   "forcing PORTS_IMPL to 0x%x\n", port_map);
 
 		/* write the fixed up value to the PI register */
@@ -972,7 +970,8 @@ static void ahci_pci_save_initial_config(struct pci_dev *pdev,
 			  "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n");
 	}
 
-	ahci_save_initial_config(pdev, hpriv, force_port_map, mask_port_map);
+	ahci_save_initial_config(&pdev->dev, hpriv, force_port_map,
+				 mask_port_map);
 }
 
 /**
-- 
1.7.0

  parent reply	other threads:[~2010-03-03 17:17 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-03-03 17:17 [PATCH 0/11] ahci: Add support for non-PCI devices Anton Vorontsov
2010-03-03 17:17 ` [PATCH 01/11] ahci: Get rid of host->iomap usage Anton Vorontsov
2010-03-03 18:45   ` Jeff Garzik
2010-03-03 18:49     ` Jeff Garzik
2010-03-03 17:17 ` [PATCH 02/11] ahci: Factor out PCI specifics from ahci_save_initial_config() Anton Vorontsov
2010-03-03 17:17 ` Anton Vorontsov [this message]
2010-03-03 17:17 ` [PATCH 04/11] ahci: Factor out PCI specifics from ahci_reset_controller() Anton Vorontsov
2010-03-03 17:17 ` [PATCH 05/11] ahci: Get rid of pci_dev argument in ahci_port_init() Anton Vorontsov
2010-03-03 17:17 ` [PATCH 06/11] ahci: Factor out PCI specifics from ahci_init_controller() Anton Vorontsov
2010-03-03 17:17 ` [PATCH 07/11] ahci: Factor out PCI specifics from ahci_print_info() Anton Vorontsov
2010-03-03 17:17 ` [PATCH 08/11] ahci: Introduce ahci_set_em_messages() Anton Vorontsov
2010-03-03 20:52   ` Jeff Garzik
2010-03-03 17:17 ` [PATCH 09/11] ahci: Move generic code into libahci Anton Vorontsov
2010-03-03 17:33   ` Sergei Shtylyov
2010-03-03 17:45     ` Anton Vorontsov
2010-03-03 18:43   ` Jeff Garzik
2010-03-03 21:58     ` Mark Lord
2010-03-03 17:17 ` [PATCH 10/11] ahci: Export generic AHCI symbols, turn libahci into a separate module Anton Vorontsov
2010-03-03 17:53   ` Sergei Shtylyov
2010-03-03 18:08     ` Anton Vorontsov
2010-03-03 18:14       ` Anton Vorontsov
2010-03-03 18:34         ` Jeff Garzik
2010-03-03 18:42           ` Anton Vorontsov
2010-03-03 17:17 ` [PATCH 11/11] ahci: Add platform driver Anton Vorontsov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100303171737.GC12362@oksana.dev.rtsoft.ru \
    --to=avorontsov@ru.mvista.com \
    --cc=jgarzik@pobox.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sshtylyov@mvista.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.