From: Bruce Guenter <bruce@untroubled.org>
To: linux-btrfs@vger.kernel.org
Subject: Cross-subvolume link causes kernel BUG
Date: Mon, 8 Mar 2010 11:24:38 -0600 [thread overview]
Message-ID: <20100308172438.GA5506@untroubled.org> (raw)
[-- Attachment #1: Type: text/plain, Size: 42304 bytes --]
Hi.
While testing subvolumes in btrfs on 2.6.32.9, I hit a kernel BUG:
[ 492.164012] kernel BUG at fs/btrfs/inode.c:4365!
The commands to reproduce this bug are as follows:
# mount -t btrfs /dev/sda5 /scratch
# btrfsctl -S subvol /scratch
# date > /scratch/date
# ln /scratch/date /scratch/subvol/
ln segfaults, and the bug above is found in dmesg. Subsequent accesses
to the subvolume result in a D state hung process. Full dmesg follows.
I first observed this on a Gentoo system and reproduced it on Ubuntu.
Both were running unpatched 2.6.32.9 kernels.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32.9 (administrator@lennier) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #1 SMP Mon Mar 8 00:49:35 CST 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000005fff0000 (usable)
[ 0.000000] BIOS-e820: 000000005fff0000 - 000000005fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000005fff3000 - 0000000060000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x5fff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 base 0040000000 mask FFE0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000005fff0000 (usable)
[ 0.000000] modified: 000000005fff0000 - 000000005fff3000 (ACPI NVS)
[ 0.000000] modified: 000000005fff3000 - 0000000060000000 (ACPI data)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] ACPI: RSDP 000f76f0 00014 (v00 Nvidia)
[ 0.000000] ACPI: RSDT 5fff3040 00038 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 5fff30c0 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 5fff3180 06264 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 5fff0000 00040
[ 0.000000] ACPI: SSDT 5fff9500 000D6 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: SRAT 5fff9640 00090 (v01 AMD HAMMER 00000001 AMD 00000001)
[ 0.000000] ACPI: MCFG 5fff9740 0003C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 5fff9440 0007C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 647MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008474dc] TEXT DATA BSS ==> [0000100000 - 00008474dc]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [0000848000 - 000084b149] BRK ==> [0000848000 - 000084b149]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #7 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00f5680] f5680
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0005fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0005fff0
[ 0.000000] On node 0 totalpages: 393087
[ 0.000000] free_area_init_node: node 0, pgdat c07314c0, node_mem_map c1001200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1296 pages used for memmap
[ 0.000000] HighMem zone: 164578 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:80000000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s34360 r0 d22984 u2097152
[ 0.000000] pcpu-alloc: s34360 r0 d22984 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 390015
[ 0.000000] Kernel command line: root=/dev/sda4 ro text
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 7863680 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0005fff0)
[ 0.000000] Memory: 1542900k/1572800k available (4376k kernel code, 28400k reserved, 2004k data, 440k init, 663496k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc073c000 - 0xc07aa000 ( 440 kB)
[ 0.000000] .data : 0xc05462e8 - 0xc073b3a0 (2004 kB)
[ 0.000000] .text : 0xc0100000 - 0xc05462e8 (4376 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:512
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2010.293 MHz processor.
[ 0.008007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.58 BogoMIPS (lpj=8041172)
[ 0.008099] Security Framework initialized
[ 0.008143] SELinux: Disabled at boot.
[ 0.008186] Mount-cache hash table entries: 512
[ 0.008389] Initializing cgroup subsys ns
[ 0.008429] Initializing cgroup subsys cpuacct
[ 0.008468] Initializing cgroup subsys memory
[ 0.008509] Initializing cgroup subsys freezer
[ 0.008564] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.008603] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.008651] Performance Events: AMD PMU driver.
[ 0.008723] ... version: 0
[ 0.008760] ... bit width: 48
[ 0.008796] ... generic registers: 4
[ 0.008832] ... value mask: 0000ffffffffffff
[ 0.008870] ... max period: 00007fffffffffff
[ 0.008907] ... fixed-purpose events: 0
[ 0.008943] ... event mask: 000000000000000f
[ 0.008983] Checking 'hlt' instruction... OK.
[ 0.024698] SMP alternatives: switching to UP code
[ 0.030486] ACPI: Core revision 20090903
[ 0.042546] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.082273] CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 02
[ 0.084001] Brought up 1 CPUs
[ 0.084001] Total of 1 processors activated (4020.58 BogoMIPS).
[ 0.084001] CPU0 attaching NULL sched-domain.
[ 0.084001] Time: 16:39:29 Date: 03/08/10
[ 0.084001] NET: Registered protocol family 16
[ 0.084001] ACPI: bus type pci registered
[ 0.084001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.084001] PCI: MCFG area at e0000000 reserved in E820
[ 0.084001] PCI: Using MMCONFIG for extended config space
[ 0.084001] PCI: Using configuration type 1 for base access
[ 0.084001] bio: create slab <bio-0> at 0
[ 0.084001] ACPI: EC: Look up EC in DSDT
[ 0.091433] ACPI: Interpreter enabled
[ 0.091476] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.091695] ACPI: Using IOAPIC for interrupt routing
[ 0.099708] ACPI: No dock devices found.
[ 0.099846] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.099978] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.100016] pci 0000:00:01.1: reg 10 io port: [0xe400-0xe41f]
[ 0.100025] pci 0000:00:01.1: reg 20 io port: [0x4c00-0x4c3f]
[ 0.100029] pci 0000:00:01.1: reg 24 io port: [0x4c40-0x4c7f]
[ 0.100039] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.100078] pci 0000:00:01.1: PME# disabled
[ 0.100131] pci 0000:00:02.0: reg 10 32bit mmio: [0xd2004000-0xd2004fff]
[ 0.100147] pci 0000:00:02.0: supports D1 D2
[ 0.100149] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.100188] pci 0000:00:02.0: PME# disabled
[ 0.100240] pci 0000:00:02.1: reg 10 32bit mmio: [0xfeb00000-0xfeb000ff]
[ 0.100260] pci 0000:00:02.1: supports D1 D2
[ 0.100262] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.100301] pci 0000:00:02.1: PME# disabled
[ 0.100355] pci 0000:00:04.0: reg 10 io port: [0xdc00-0xdcff]
[ 0.100359] pci 0000:00:04.0: reg 14 io port: [0xe000-0xe0ff]
[ 0.100364] pci 0000:00:04.0: reg 18 32bit mmio: [0xd2003000-0xd2003fff]
[ 0.100377] pci 0000:00:04.0: supports D1 D2
[ 0.100399] pci 0000:00:06.0: reg 20 io port: [0xf000-0xf00f]
[ 0.100421] pci 0000:00:07.0: reg 10 io port: [0x9f0-0x9f7]
[ 0.100425] pci 0000:00:07.0: reg 14 io port: [0xbf0-0xbf3]
[ 0.100429] pci 0000:00:07.0: reg 18 io port: [0x970-0x977]
[ 0.100433] pci 0000:00:07.0: reg 1c io port: [0xb70-0xb73]
[ 0.100437] pci 0000:00:07.0: reg 20 io port: [0xd800-0xd80f]
[ 0.100441] pci 0000:00:07.0: reg 24 32bit mmio: [0xd2002000-0xd2002fff]
[ 0.100462] pci 0000:00:08.0: reg 10 io port: [0x9e0-0x9e7]
[ 0.100466] pci 0000:00:08.0: reg 14 io port: [0xbe0-0xbe3]
[ 0.100470] pci 0000:00:08.0: reg 18 io port: [0x960-0x967]
[ 0.100474] pci 0000:00:08.0: reg 1c io port: [0xb60-0xb63]
[ 0.100478] pci 0000:00:08.0: reg 20 io port: [0xc400-0xc40f]
[ 0.100482] pci 0000:00:08.0: reg 24 32bit mmio: [0xd2001000-0xd2001fff]
[ 0.100513] pci 0000:00:0a.0: reg 10 32bit mmio: [0xd2000000-0xd2000fff]
[ 0.100517] pci 0000:00:0a.0: reg 14 io port: [0xb000-0xb007]
[ 0.100532] pci 0000:00:0a.0: supports D1 D2
[ 0.100535] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.100573] pci 0000:00:0a.0: PME# disabled
[ 0.100638] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.100676] pci 0000:00:0b.0: PME# disabled
[ 0.100741] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.100779] pci 0000:00:0c.0: PME# disabled
[ 0.100844] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.100882] pci 0000:00:0d.0: PME# disabled
[ 0.100946] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.100984] pci 0000:00:0e.0: PME# disabled
[ 0.101116] pci 0000:00:09.0: transparent bridge
[ 0.101931] pci 0000:01:00.0: reg 10 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.101939] pci 0000:01:00.0: reg 18 64bit mmio: [0xd1000000-0xd100ffff]
[ 0.101944] pci 0000:01:00.0: reg 20 io port: [0xa000-0xa0ff]
[ 0.101952] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.101967] pci 0000:01:00.0: supports D1 D2
[ 0.101993] pci 0000:01:00.1: reg 10 64bit mmio: [0xd1010000-0xd1013fff]
[ 0.102020] pci 0000:01:00.1: supports D1 D2
[ 0.102055] pci 0000:00:0e.0: bridge io port: [0xa000-0xafff]
[ 0.102058] pci 0000:00:0e.0: bridge 32bit mmio: [0xd0000000-0xd1ffffff]
[ 0.102062] pci 0000:00:0e.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.102072] pci_bus 0000:00: on NUMA node 0
[ 0.102077] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.102305] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.171712] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.172335] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.172959] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 *7 9 10 11 12 14 15)
[ 0.173516] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 *4 5 7 9 10 11 12 14 15)
[ 0.174076] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.174699] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.175327] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.175951] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.176493] ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.177052] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.177673] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.178295] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.178916] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.179548] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.180150] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.180718] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.181363] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.181717] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.182070] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[ 0.182395] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
[ 0.182656] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 0.182985] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[ 0.183441] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[ 0.183896] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.184295] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
[ 0.184718] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[ 0.185174] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[ 0.185629] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[ 0.186084] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.186549] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.186981] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.187413] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[ 0.187797] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.187838] vgaarb: loaded
[ 0.188019] SCSI subsystem initialized
[ 0.188134] libata version 3.00 loaded.
[ 0.188220] usbcore: registered new interface driver usbfs
[ 0.188273] usbcore: registered new interface driver hub
[ 0.188331] usbcore: registered new device driver usb
[ 0.188430] PCI: Using ACPI for IRQ routing
[ 0.188591] NetLabel: Initializing
[ 0.188627] NetLabel: domain hash size = 128
[ 0.188664] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.188714] NetLabel: unlabeled traffic allowed by default
[ 0.188756] Switching to clocksource jiffies
[ 0.190546] pnp: PnP ACPI init
[ 0.190604] ACPI: bus type pnp registered
[ 0.195109] pnp: PnP ACPI: found 13 devices
[ 0.195147] ACPI: ACPI bus type pnp unregistered
[ 0.195186] PnPBIOS: Disabled by ACPI PNP
[ 0.195232] system 00:01: ioport range 0x4000-0x407f has been reserved
[ 0.195271] system 00:01: ioport range 0x4080-0x40ff has been reserved
[ 0.195310] system 00:01: ioport range 0x4400-0x447f has been reserved
[ 0.195349] system 00:01: ioport range 0x4480-0x44ff has been reserved
[ 0.195387] system 00:01: ioport range 0x4800-0x487f has been reserved
[ 0.195426] system 00:01: ioport range 0x4880-0x48ff has been reserved
[ 0.195467] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.195505] system 00:02: ioport range 0x800-0x805 has been reserved
[ 0.195544] system 00:02: ioport range 0x290-0x297 has been reserved
[ 0.195588] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.195629] system 00:0c: iomem range 0xf0000-0xf3fff could not be reserved
[ 0.195668] system 00:0c: iomem range 0xf4000-0xf7fff could not be reserved
[ 0.195707] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.195746] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
[ 0.195785] system 00:0c: iomem range 0x5fff0000-0x5fffffff could not be reserved
[ 0.195826] system 00:0c: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.195865] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.195904] system 00:0c: iomem range 0x100000-0x5ffeffff could not be reserved
[ 0.195945] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.196004] system 00:0c: iomem range 0xfee00000-0xfeefffff has been reserved
[ 0.196043] system 00:0c: iomem range 0xfefff000-0xfeffffff has been reserved
[ 0.196082] system 00:0c: iomem range 0xfff80000-0xfff80fff has been reserved
[ 0.196121] system 00:0c: iomem range 0xfff90000-0xfffbffff has been reserved
[ 0.196160] system 00:0c: iomem range 0xfffed000-0xfffeffff has been reserved
[ 0.230828] Switching to clocksource acpi_pm
[ 0.230994] pci 0000:00:09.0: PCI bridge, secondary bus 0000:05
[ 0.231032] pci 0000:00:09.0: IO window: disabled
[ 0.231070] pci 0000:00:09.0: MEM window: disabled
[ 0.231107] pci 0000:00:09.0: PREFETCH window: disabled
[ 0.231146] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:04
[ 0.231183] pci 0000:00:0b.0: IO window: disabled
[ 0.231221] pci 0000:00:0b.0: MEM window: disabled
[ 0.231258] pci 0000:00:0b.0: PREFETCH window: disabled
[ 0.231297] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03
[ 0.231335] pci 0000:00:0c.0: IO window: disabled
[ 0.231372] pci 0000:00:0c.0: MEM window: disabled
[ 0.231410] pci 0000:00:0c.0: PREFETCH window: disabled
[ 0.231450] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:02
[ 0.231487] pci 0000:00:0d.0: IO window: disabled
[ 0.231525] pci 0000:00:0d.0: MEM window: disabled
[ 0.231562] pci 0000:00:0d.0: PREFETCH window: disabled
[ 0.231606] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:01
[ 0.231644] pci 0000:00:0e.0: IO window: 0xa000-0xafff
[ 0.231685] pci 0000:00:0e.0: MEM window: 0xd0000000-0xd1ffffff
[ 0.231725] pci 0000:00:0e.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
[ 0.231773] pci 0000:00:09.0: setting latency timer to 64
[ 0.231778] pci 0000:00:0b.0: setting latency timer to 64
[ 0.231783] pci 0000:00:0c.0: setting latency timer to 64
[ 0.231788] pci 0000:00:0d.0: setting latency timer to 64
[ 0.231792] pci 0000:00:0e.0: setting latency timer to 64
[ 0.231797] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.231800] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.231803] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.231806] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
[ 0.231809] pci_bus 0000:01: resource 0 io: [0xa000-0xafff]
[ 0.231812] pci_bus 0000:01: resource 1 mem: [0xd0000000-0xd1ffffff]
[ 0.231815] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
[ 0.231855] NET: Registered protocol family 2
[ 0.231989] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.232001] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.232001] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.232001] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.232001] TCP reno registered
[ 0.232001] NET: Registered protocol family 1
[ 0.248093] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.248135] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[ 0.248177] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.248217] pci 0000:00:0b.0: Linking AER extended capability
[ 0.248288] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.248328] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[ 0.248370] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.248408] pci 0000:00:0c.0: Linking AER extended capability
[ 0.248481] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.248522] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[ 0.248564] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.248602] pci 0000:00:0d.0: Linking AER extended capability
[ 0.248678] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.248718] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[ 0.248760] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.248798] pci 0000:00:0e.0: Linking AER extended capability
[ 0.248843] pci 0000:01:00.0: Boot video device
[ 0.249003] cpufreq-nforce2: No nForce2 chipset.
[ 0.249070] Scanning for low memory corruption every 60 seconds
[ 0.249219] audit: initializing netlink socket (disabled)
[ 0.249266] type=2000 audit(1268066369.248:1): initialized
[ 0.258121] highmem bounce pool size: 64 pages
[ 0.258164] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.259574] VFS: Disk quotas dquot_6.5.2
[ 0.259667] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.260278] fuse init (API version 7.13)
[ 0.260390] msgmni has been set to 1719
[ 0.260618] alg: No test for stdrng (krng)
[ 0.260661] io scheduler noop registered
[ 0.260698] io scheduler anticipatory registered
[ 0.260735] io scheduler deadline registered
[ 0.260815] io scheduler cfq registered (default)
[ 0.260946] pcieport 0000:00:0b.0: irq 24 for MSI/MSI-X
[ 0.260952] pcieport 0000:00:0b.0: setting latency timer to 64
[ 0.261015] pcieport 0000:00:0c.0: irq 25 for MSI/MSI-X
[ 0.261019] pcieport 0000:00:0c.0: setting latency timer to 64
[ 0.261077] pcieport 0000:00:0d.0: irq 26 for MSI/MSI-X
[ 0.261081] pcieport 0000:00:0d.0: setting latency timer to 64
[ 0.261138] pcieport 0000:00:0e.0: irq 27 for MSI/MSI-X
[ 0.261142] pcieport 0000:00:0e.0: setting latency timer to 64
[ 0.261197] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.261256] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.261429] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.261471] ACPI: Power Button [PWRB]
[ 0.261569] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.261610] ACPI: Power Button [PWRF]
[ 0.261692] fan PNP0C0B:00: registered as cooling_device0
[ 0.261733] ACPI: Fan [FAN] (on)
[ 0.262282] processor LNXCPU:00: registered as cooling_device1
[ 0.266830] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.266879] ACPI: Thermal Zone [THRM] (40 C)
[ 0.266982] isapnp: Scanning for PnP cards...
[ 0.619477] isapnp: No Plug & Play device found
[ 0.620585] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.621769] brd: module loaded
[ 0.622218] loop: module loaded
[ 0.622495] sata_nv 0000:00:07.0: version 3.5
[ 0.622884] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 0.622933] sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[ 0.623034] sata_nv 0000:00:07.0: setting latency timer to 64
[ 0.623131] scsi0 : sata_nv
[ 0.623240] scsi1 : sata_nv
[ 0.623430] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 23
[ 0.623469] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 23
[ 0.623832] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[ 0.623873] sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[ 0.623957] sata_nv 0000:00:08.0: setting latency timer to 64
[ 0.624069] scsi2 : sata_nv
[ 0.624152] scsi3 : sata_nv
[ 0.624329] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 22
[ 0.624368] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 22
[ 0.625145] pata_amd 0000:00:06.0: version 0.4.1
[ 0.625189] pata_amd 0000:00:06.0: setting latency timer to 64
[ 0.625257] scsi4 : pata_amd
[ 0.625370] scsi5 : pata_amd
[ 0.626090] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 0.626129] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 0.626485] Fixed MDIO Bus: probed
[ 0.626615] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.626916] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[ 0.626962] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
[ 0.627013] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 0.627016] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 0.627105] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 0.627171] ehci_hcd 0000:00:02.1: debug port 1
[ 0.627211] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 0.627225] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfeb00000
[ 0.636034] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.636153] usb usb1: configuration #1 chosen from 1 choice
[ 0.636217] hub 1-0:1.0: USB hub found
[ 0.636262] hub 1-0:1.0: 10 ports detected
[ 0.636360] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.636666] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
[ 0.636708] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20
[ 0.636756] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 0.636759] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.636824] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 0.636882] ohci_hcd 0000:00:02.0: irq 20, io mem 0xd2004000
[ 0.694056] usb usb2: configuration #1 chosen from 1 choice
[ 0.694115] hub 2-0:1.0: USB hub found
[ 0.694159] hub 2-0:1.0: 10 ports detected
[ 0.694246] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.694380] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.694418] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.695560] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.695667] mice: PS/2 mouse device common for all mice
[ 0.695796] rtc_cmos 00:04: RTC can wake from S4
[ 0.695869] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.695927] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 0.696079] device-mapper: uevent: version 1.0.3
[ 0.696204] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.696295] device-mapper: multipath: version 1.1.0 loaded
[ 0.696333] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.696500] cpuidle: using governor ladder
[ 0.696537] cpuidle: using governor menu
[ 0.697001] TCP cubic registered
[ 0.697186] NET: Registered protocol family 10
[ 0.697620] lo: Disabled Privacy Extensions
[ 0.697934] NET: Registered protocol family 17
[ 0.697975] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (1 cpu cores) (version 2.20.00)
[ 0.698061] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x6
[ 0.698099] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x8
[ 0.698136] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12
[ 0.698208] Using IPI No-Shortcut mode
[ 0.698307] PM: Resume from disk failed.
[ 0.698319] registered taskstats version 1
[ 0.698613] Magic number: 2:411:691
[ 0.698765] rtc_cmos 00:04: setting system clock to 2010-03-08 16:39:30 UTC (1268066370)
[ 0.698807] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.698844] EDD information not available.
[ 0.715385] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.788399] ata5.00: ATA-5: ST380021A, 3.19, max UDMA/100
[ 0.788438] ata5.00: 156301488 sectors, multi 1: LBA
[ 0.788497] ata5: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc60000c0) ACPI=0x3f01f (20:600:0x13)
[ 0.804320] ata5.00: configured for UDMA/100
[ 0.936025] ata3: SATA link down (SStatus 0 SControl 300)
[ 0.936076] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.004022] usb 1-9: new high speed USB device using ehci_hcd and address 3
[ 1.138706] usb 1-9: configuration #1 chosen from 1 choice
[ 1.248021] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.440020] usb 2-2: new low speed USB device using ohci_hcd and address 2
[ 1.560021] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.560188] scsi 4:0:0:0: Direct-Access ATA ST380021A 3.19 PQ: 0 ANSI: 5
[ 1.560343] sd 4:0:0:0: Attached scsi generic sg0 type 0
[ 1.560508] sd 4:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.560587] sd 4:0:0:0: [sda] Write Protect is off
[ 1.560625] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.560645] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.560805] sda: sda1 sda2 < sda5 sda6 sda7 > sda3 sda4
[ 1.622860] sd 4:0:0:0: [sda] Attached SCSI disk
[ 1.652093] usb 2-2: configuration #1 chosen from 1 choice
[ 1.732251] ata6.01: ATAPI: HL-DT-STDVD-ROM GDR8164B, 0L06, max UDMA/33
[ 1.732312] ata6: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc60000c0) ACPI=0x701f (600:60:0x1c)
[ 1.748199] ata6.01: configured for UDMA/33
[ 1.752066] scsi 5:0:1:0: CD-ROM HL-DT-ST DVD-ROM GDR8164B 0L06 PQ: 0 ANSI: 5
[ 1.760072] sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[ 1.760112] Uniform CD-ROM driver Revision: 3.20
[ 1.760221] sr 5:0:1:0: Attached scsi CD-ROM sr0
[ 1.760260] sr 5:0:1:0: Attached scsi generic sg1 type 5
[ 1.760320] md: Waiting for all devices to be available before autodetect
[ 1.760358] md: If you don't use raid, use raid=noautodetect
[ 1.760485] md: Autodetecting RAID arrays.
[ 1.760522] md: Scanned 0 and added 0 devices.
[ 1.760559] md: autorun ...
[ 1.760594] md: ... autorun DONE.
[ 1.797114] kjournald starting. Commit interval 5 seconds
[ 1.797160] EXT3-fs: mounted filesystem with writeback data mode.
[ 1.797206] VFS: Mounted root (ext3 filesystem) readonly on device 8:4.
[ 1.797263] Freeing unused kernel memory: 440k freed
[ 1.797679] Write protecting the kernel text: 4380k
[ 1.797742] Write protecting the kernel read-only data: 1652k
[ 9.708291] Initializing USB Mass Storage driver...
[ 9.722261] scsi6 : SCSI emulation for USB Mass Storage devices
[ 9.750555] usbcore: registered new interface driver usb-storage
[ 9.750602] USB Mass Storage support registered.
[ 9.751046] usb-storage: device found at 3
[ 9.751048] usb-storage: waiting for device to settle before scanning
[ 9.842682] usbcore: registered new interface driver hiddev
[ 9.848572] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input3
[ 9.848788] generic-usb 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:02.0-2/input0
[ 9.848881] usbcore: registered new interface driver usbhid
[ 9.848920] usbhid: v2.6:USB HID core driver
[ 9.861558] i2c i2c-0: nForce2 SMBus adapter at 0x4c00
[ 9.861619] i2c i2c-1: nForce2 SMBus adapter at 0x4c40
[ 9.876872] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 9.877258] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 9.877300] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
[ 9.877344] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 9.877399] nv_probe: set workaround bit for reversed mac addr
[ 9.914918] Floppy drive(s): fd0 is 1.44M
[ 9.922547] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 9.931853] FDC 0 is a post-1991 82077
[ 10.396791] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 9, addr 00:15:f2:3f:8f:bd
[ 10.396839] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
[ 10.591605] udev: renamed network interface eth0 to eth1
[ 10.912575] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 10.912631] HDA Intel 0000:01:00.1: PCI INT B -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
[ 10.912707] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 10.955061] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[ 10.955110] Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, low) -> IRQ 22
[ 10.955186] Intel ICH 0000:00:04.0: setting latency timer to 64
[ 11.312304] intel8x0_measure_ac97_clock: measured 53624 usecs (2632 samples)
[ 11.312349] intel8x0: clocking to 46941
[ 11.865841] Adding 1020088k swap on /dev/sda1. Priority:-1 extents:1 across:1020088k
[ 12.273027] EXT3 FS on sda4, internal journal
[ 12.759553] kjournald starting. Commit interval 5 seconds
[ 12.759562] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 12.760023] EXT3 FS on sda5, internal journal
[ 12.760028] EXT3-fs: mounted filesystem with writeback data mode.
[ 12.790310] kjournald starting. Commit interval 5 seconds
[ 12.790316] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 12.790515] EXT3 FS on sda6, internal journal
[ 12.790518] EXT3-fs: mounted filesystem with writeback data mode.
[ 12.826290] kjournald starting. Commit interval 5 seconds
[ 12.826295] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 12.826529] EXT3 FS on sda7, internal journal
[ 12.826532] EXT3-fs: mounted filesystem with writeback data mode.
[ 13.419921] RPC: Registered udp transport module.
[ 13.419925] RPC: Registered tcp transport module.
[ 13.419927] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 13.588110] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 14.750894] usb-storage: device scan complete
[ 14.752570] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 14.753070] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 14.753569] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 14.754074] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 14.755144] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 14.755439] sd 6:0:0:1: Attached scsi generic sg3 type 0
[ 14.755701] sd 6:0:0:2: Attached scsi generic sg4 type 0
[ 14.755949] sd 6:0:0:3: Attached scsi generic sg5 type 0
[ 14.763429] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 14.767110] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 14.771253] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 14.773366] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 45.212018] eth1: no IPv6 routers present
[ 92.580025] Clocksource tsc unstable (delta = -163988709 ns)
[ 396.065147] Btrfs loaded
[ 396.065481] device fsid 874dfadf1d697672-ce62e6710d183d88 devid 1 transid 7 /dev/loop0
[ 492.163963] ------------[ cut here ]------------
[ 492.164012] kernel BUG at fs/btrfs/inode.c:4365!
[ 492.164012] invalid opcode: 0000 [#1] SMP
[ 492.164012] last sysfs file: /sys/devices/pci0000:00/0000:00:02.0/pools
[ 492.164012] Modules linked in: btrfs zlib_deflate crc32c libcrc32c binfmt_misc video output nfsd exportfs nfs lockd nfs_acl auth_rpcgss sunrpc dm_crypt snd_wavefront snd_cs4236 snd_wss_lib snd_opl3_lib snd_hda_codec_atihdmi snd_intel8x0 snd_hwdep snd_mpu401 snd_hda_intel snd_mpu401_uart snd_ac97_codec snd_hda_codec ac97_bus snd_seq_dummy snd_pcm_oss snd_mixer_oss snd_seq_oss snd_seq_midi snd_pcm snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd pcspkr floppy forcedeth i2c_nforce2 soundcore snd_page_alloc k8temp usbhid usb_storage
[ 492.164012]
[ 492.164012] Pid: 3919, comm: ln Not tainted (2.6.32.9 #1) System Product Name
[ 492.164012] EIP: 0060:[<f87a646a>] EFLAGS: 00010282 CPU: 0
[ 492.164012] EIP is at btrfs_link+0x17a/0x180 [btrfs]
[ 492.164012] EAX: fffffffe EBX: f5df9000 ECX: c20051a8 EDX: 00000000
[ 492.164012] ESI: fffffffe EDI: f4e60918 EBP: f5037ee4 ESP: f5037eb0
[ 492.164012] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[ 492.164012] Process ln (pid: 3919, ti=f5036000 task=f5088000 task.ti=f5036000)
[ 492.164012] Stack:
[ 492.164012] 00000001 00000002 00000000 f4e664c8 f67c1800 f4e60918 00000001 f4e60540
[ 492.164012] <0> 00000002 00000000 f87de380 f4e5d7f8 f4e60918 f5037f10 c01f3d2d 00000000
[ 492.164012] <0> f5037f20 f5037f00 f4e664c8 f4e60678 f4e60990 00000000 f5037f78 f5037f20
[ 492.164012] Call Trace:
[ 492.164012] [<c01f3d2d>] ? vfs_link+0x10d/0x210
[ 492.164012] [<c01f6f43>] ? sys_linkat+0xe3/0xf0
[ 492.164012] [<c01eeaf2>] ? sys_lstat64+0x22/0x30
[ 492.164012] [<c01f6f80>] ? sys_link+0x30/0x40
[ 492.164012] [<c0102ef0>] ? sysenter_do_call+0x12/0x22
[ 492.164012] Code: e0 8b 45 dc e8 88 30 ff ff e9 d8 fe ff ff 8d 76 00 8b 45 dc ba 03 00 00 00 e8 73 37 fe ff c7 45 e0 00 00 00 00 8d 74 26 00 eb d3 <0f> 0b eb fe 66 90 55 89 e5 83 ec 5c 89 75 f8 89 c6 8d 80 c8 fe
[ 492.164012] EIP: [<f87a646a>] btrfs_link+0x17a/0x180 [btrfs] SS:ESP 0068:f5037eb0
[ 492.170162] ---[ end trace 2c24404282a55ea4 ]---
--
Bruce Guenter <bruce@untroubled.org> http://untroubled.org/
[-- Attachment #2: Type: application/pgp-signature, Size: 198 bytes --]
next reply other threads:[~2010-03-08 17:24 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-08 17:24 Bruce Guenter [this message]
2010-03-08 17:39 ` Cross-subvolume link causes kernel BUG Chris Ball
2010-03-08 18:26 ` Bruce Guenter
2010-03-08 21:21 ` Mike Fedyk
2010-03-09 2:16 ` Mike Fedyk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100308172438.GA5506@untroubled.org \
--to=bruce@untroubled.org \
--cc=linux-btrfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.