From: Bruno Randolf <br1@einfach.org>
To: linville@tuxdriver.com
Cc: ath5k-devel@lists.ath5k.org, linux-wireless@vger.kernel.org
Subject: [PATCH 01/13] ath5k: add antenna statistics and debugfs file for antenna settings
Date: Tue, 09 Mar 2010 16:55:17 +0900 [thread overview]
Message-ID: <20100309075517.30616.25838.stgit@void> (raw)
In-Reply-To: <20100309075124.30616.40896.stgit@void>
keep statistics about which antenna was used for TX and RX. this is used only
for debugging right now, but might have other applications later.
add a new file 'antenna' in debugfs (/sys/kernel/debug/ath5k/phy0/antenna) to show
antenna use statistics and antenna diversity related register values. it can
also be used to set the antenna mode until we have proper support for that in
iw:
- echo diversity > antenna: use default antenna mode (RX and TX diversity)
- echo fixed-a > antenna: use fixed antenna A for RX and TX
- echo fixed-b > antenna: use fixed antenna B for RX and TX
- echo clear > antenna: reset antenna statistics
Signed-off-by: Bruno Randolf <br1@einfach.org>
---
drivers/net/wireless/ath/ath5k/base.c | 11 +++
drivers/net/wireless/ath/ath5k/base.h | 8 ++
drivers/net/wireless/ath/ath5k/debug.c | 106 ++++++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath5k/debug.h | 1
4 files changed, 126 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 2468c64..85eb670 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -1942,6 +1942,12 @@ accept:
rxs->signal = rxs->noise + rs.rs_rssi;
rxs->antenna = rs.rs_antenna;
+
+ if (rs.rs_antenna > 0 && rs.rs_antenna < 5)
+ sc->stats.antenna_rx[rs.rs_antenna]++;
+ else
+ sc->stats.antenna_rx[0]++; /* invalid */
+
rxs->rate_idx = ath5k_hw_to_driver_rix(sc, rs.rs_rate);
rxs->flag |= ath5k_rx_decrypted(sc, ds, skb, &rs);
@@ -2029,6 +2035,11 @@ ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq)
info->status.ack_signal = ts.ts_rssi;
}
+ if (ts.ts_antenna > 0 && ts.ts_antenna < 5)
+ sc->stats.antenna_tx[ts.ts_antenna]++;
+ else
+ sc->stats.antenna_tx[0]++; /* invalid */
+
ieee80211_tx_status(sc->hw, skb);
spin_lock(&sc->txbuflock);
diff --git a/drivers/net/wireless/ath/ath5k/base.h b/drivers/net/wireless/ath/ath5k/base.h
index 7e1a88a..ca52584 100644
--- a/drivers/net/wireless/ath/ath5k/base.h
+++ b/drivers/net/wireless/ath/ath5k/base.h
@@ -105,6 +105,12 @@ struct ath5k_rfkill {
struct tasklet_struct toggleq;
};
+/* statistics (only used for debugging now) */
+struct ath5k_statistics {
+ unsigned int antenna_rx[5]; /* frames count per antenna RX */
+ unsigned int antenna_tx[5]; /* frames count per antenna TX */
+};
+
#if CHAN_DEBUG
#define ATH_CHAN_MAX (26+26+26+200+200)
#else
@@ -191,6 +197,8 @@ struct ath5k_softc {
int power_level; /* Requested tx power in dbm */
bool assoc; /* associate state */
bool enable_beacon; /* true if beacons are on */
+
+ struct ath5k_statistics stats;
};
#define ath5k_hw_hasbssidmask(_ah) \
diff --git a/drivers/net/wireless/ath/ath5k/debug.c b/drivers/net/wireless/ath/ath5k/debug.c
index 747508c..236f20f 100644
--- a/drivers/net/wireless/ath/ath5k/debug.c
+++ b/drivers/net/wireless/ath/ath5k/debug.c
@@ -364,6 +364,107 @@ static const struct file_operations fops_debug = {
};
+/* debugfs: antenna */
+
+static ssize_t read_file_antenna(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath5k_softc *sc = file->private_data;
+ char buf[700];
+ unsigned int len = 0;
+ unsigned int i;
+ unsigned int v;
+
+ len += snprintf(buf+len, sizeof(buf)-len, "antenna mode\t%d\n",
+ sc->ah->ah_ant_mode);
+ len += snprintf(buf+len, sizeof(buf)-len, "default antenna\t%d\n",
+ sc->ah->ah_def_ant);
+ len += snprintf(buf+len, sizeof(buf)-len, "tx antenna\t%d\n",
+ sc->ah->ah_tx_ant);
+
+ len += snprintf(buf+len, sizeof(buf)-len, "\nANTENNA\t\tRX\tTX\n");
+ for (i = 1; i < ARRAY_SIZE(sc->stats.antenna_rx); i++) {
+ len += snprintf(buf+len, sizeof(buf)-len,
+ "[antenna %d]\t%d\t%d\n",
+ i, sc->stats.antenna_rx[i], sc->stats.antenna_tx[i]);
+ }
+ len += snprintf(buf+len, sizeof(buf)-len, "[invalid]\t%d\t%d\n",
+ sc->stats.antenna_rx[0], sc->stats.antenna_tx[0]);
+
+ v = ath5k_hw_reg_read(sc->ah, AR5K_DEFAULT_ANTENNA);
+ len += snprintf(buf+len, sizeof(buf)-len,
+ "\nAR5K_DEFAULT_ANTENNA\t0x%08x\n", v);
+
+ v = ath5k_hw_reg_read(sc->ah, AR5K_STA_ID1);
+ len += snprintf(buf+len, sizeof(buf)-len,
+ "AR5K_STA_ID1_DEFAULT_ANTENNA\t%d\n",
+ (v & AR5K_STA_ID1_DEFAULT_ANTENNA) != 0);
+ len += snprintf(buf+len, sizeof(buf)-len,
+ "AR5K_STA_ID1_DESC_ANTENNA\t%d\n",
+ (v & AR5K_STA_ID1_DESC_ANTENNA) != 0);
+ len += snprintf(buf+len, sizeof(buf)-len,
+ "AR5K_STA_ID1_RTS_DEF_ANTENNA\t%d\n",
+ (v & AR5K_STA_ID1_RTS_DEF_ANTENNA) != 0);
+ len += snprintf(buf+len, sizeof(buf)-len,
+ "AR5K_STA_ID1_SELFGEN_DEF_ANT\t%d\n",
+ (v & AR5K_STA_ID1_SELFGEN_DEF_ANT) != 0);
+
+ v = ath5k_hw_reg_read(sc->ah, AR5K_PHY_AGCCTL);
+ len += snprintf(buf+len, sizeof(buf)-len,
+ "\nAR5K_PHY_AGCCTL_OFDM_DIV_DIS\t%d\n",
+ (v & AR5K_PHY_AGCCTL_OFDM_DIV_DIS) != 0);
+
+ v = ath5k_hw_reg_read(sc->ah, AR5K_PHY_RESTART);
+ len += snprintf(buf+len, sizeof(buf)-len,
+ "AR5K_PHY_RESTART_DIV_GC\t\t%x\n",
+ (v & AR5K_PHY_RESTART_DIV_GC) >> AR5K_PHY_RESTART_DIV_GC_S);
+
+ v = ath5k_hw_reg_read(sc->ah, AR5K_PHY_FAST_ANT_DIV);
+ len += snprintf(buf+len, sizeof(buf)-len,
+ "AR5K_PHY_FAST_ANT_DIV_EN\t%d\n",
+ (v & AR5K_PHY_FAST_ANT_DIV_EN) != 0);
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t write_file_antenna(struct file *file,
+ const char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct ath5k_softc *sc = file->private_data;
+ unsigned int i;
+ char buf[20];
+
+ if (copy_from_user(buf, userbuf, min(count, sizeof(buf))))
+ return -EFAULT;
+
+ if (strncmp(buf, "diversity", 9) == 0) {
+ ath5k_hw_set_antenna_mode(sc->ah, AR5K_ANTMODE_DEFAULT);
+ printk(KERN_INFO "ath5k debug: enable diversity\n");
+ } else if (strncmp(buf, "fixed-a", 7) == 0) {
+ ath5k_hw_set_antenna_mode(sc->ah, AR5K_ANTMODE_FIXED_A);
+ printk(KERN_INFO "ath5k debugfs: fixed antenna A\n");
+ } else if (strncmp(buf, "fixed-b", 7) == 0) {
+ ath5k_hw_set_antenna_mode(sc->ah, AR5K_ANTMODE_FIXED_B);
+ printk(KERN_INFO "ath5k debug: fixed antenna B\n");
+ } else if (strncmp(buf, "clear", 5) == 0) {
+ for (i = 0; i < ARRAY_SIZE(sc->stats.antenna_rx); i++) {
+ sc->stats.antenna_rx[i] = 0;
+ sc->stats.antenna_tx[i] = 0;
+ }
+ printk(KERN_INFO "ath5k debug: cleared antenna stats\n");
+ }
+ return count;
+}
+
+static const struct file_operations fops_antenna = {
+ .read = read_file_antenna,
+ .write = write_file_antenna,
+ .open = ath5k_debugfs_open,
+ .owner = THIS_MODULE,
+};
+
+
/* init */
void
@@ -393,6 +494,10 @@ ath5k_debug_init_device(struct ath5k_softc *sc)
sc->debug.debugfs_reset = debugfs_create_file("reset", S_IWUSR,
sc->debug.debugfs_phydir, sc, &fops_reset);
+
+ sc->debug.debugfs_antenna = debugfs_create_file("antenna",
+ S_IWUSR | S_IRUSR,
+ sc->debug.debugfs_phydir, sc, &fops_antenna);
}
void
@@ -408,6 +513,7 @@ ath5k_debug_finish_device(struct ath5k_softc *sc)
debugfs_remove(sc->debug.debugfs_registers);
debugfs_remove(sc->debug.debugfs_beacon);
debugfs_remove(sc->debug.debugfs_reset);
+ debugfs_remove(sc->debug.debugfs_antenna);
debugfs_remove(sc->debug.debugfs_phydir);
}
diff --git a/drivers/net/wireless/ath/ath5k/debug.h b/drivers/net/wireless/ath/ath5k/debug.h
index 66f69f0..0186127 100644
--- a/drivers/net/wireless/ath/ath5k/debug.h
+++ b/drivers/net/wireless/ath/ath5k/debug.h
@@ -74,6 +74,7 @@ struct ath5k_dbg_info {
struct dentry *debugfs_registers;
struct dentry *debugfs_beacon;
struct dentry *debugfs_reset;
+ struct dentry *debugfs_antenna;
};
/**
next prev parent reply other threads:[~2010-03-09 7:55 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-09 7:55 [PATCH 00/13] all my ath5k patches Bruno Randolf
2010-03-09 7:55 ` Bruno Randolf [this message]
2010-03-09 12:15 ` [PATCH 01/13] ath5k: add antenna statistics and debugfs file for antenna settings Nick Kossifidis
2010-03-09 7:55 ` [PATCH 02/13] ath5k: use fixed antenna for tx descriptors Bruno Randolf
2010-03-09 12:16 ` Nick Kossifidis
2010-03-09 7:55 ` [PATCH 03/13] ath5k: preserve antenna settings Bruno Randolf
2010-03-09 12:16 ` Nick Kossifidis
2010-03-09 7:55 ` [PATCH 04/13] ath5k: fix TSF reset Bruno Randolf
2010-03-09 12:17 ` Nick Kossifidis
2010-03-09 7:55 ` [PATCH 05/13] ath5k: remove double opmode definition Bruno Randolf
2010-03-09 12:17 ` Nick Kossifidis
2010-03-09 7:55 ` [PATCH 06/13] ath5k: remove ah_magic Bruno Randolf
2010-03-09 12:18 ` Nick Kossifidis
2010-03-09 7:55 ` [PATCH 07/13] ath5k: remove ah_mac_revision Bruno Randolf
2010-03-09 12:18 ` Nick Kossifidis
2010-03-09 7:55 ` [PATCH 08/13] ath5k: remove ah_gpio_npins Bruno Randolf
2010-03-09 12:19 ` Nick Kossifidis
2010-03-09 7:56 ` [PATCH 09/13] ath5k: add debugfs file frameerrors Bruno Randolf
2010-03-09 12:21 ` Nick Kossifidis
2010-03-09 7:56 ` [PATCH 10/13] ath5k: fix I/Q calibration (for real) Bruno Randolf
2010-03-09 12:22 ` Nick Kossifidis
2010-03-09 7:56 ` [PATCH 11/13] ath5k: read eeprom IQ calibration values correctly for G mode Bruno Randolf
2010-03-09 12:22 ` Nick Kossifidis
2010-03-09 7:56 ` [PATCH 12/13] ath5k: IQ calibration for AR5211 is slightly different Bruno Randolf
2010-03-09 12:23 ` Nick Kossifidis
2010-03-09 7:56 ` [PATCH 13/13] ath5k: Minor EEPROM documentation updates Bruno Randolf
2010-03-09 14:33 ` [PATCH 00/13] all my ath5k patches John W. Linville
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100309075517.30616.25838.stgit@void \
--to=br1@einfach.org \
--cc=ath5k-devel@lists.ath5k.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.