From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Jassi Brar <jassi.brar@samsung.com>
Cc: alsa-devel@alsa-project.org, ben-linux@fluff.org
Subject: Re: [PATCH 02/20] ASoC: S3C: I2Sv2: Reject immidiate register value
Date: Wed, 10 Mar 2010 10:32:04 +0000 [thread overview]
Message-ID: <20100310103203.GE24422@rakim.wolfsonmicro.main> (raw)
In-Reply-To: <1268207349-9979-2-git-send-email-jassi.brar@samsung.com>
On Wed, Mar 10, 2010 at 04:48:51PM +0900, Jassi Brar wrote:
> Towards generalizing CPU driver interface, do not accept direct field
> values for the BCLK and RCLK.
> The machine driver should simply request the FS-multiple and not provide
> the value to be set in divide field of IISMOD.
> Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
This is good but it needs to also update all the machine drivers that
use the direct register values. A brief grep through suggests that the
uda134x machine and the OpenMoko machines need a look, though I didn't
actually check which DAI driver they're all using. If nothing uses this
feature then just note that in the changelog (if the feature is unused
that's even more reason to remove it anyway).
next prev parent reply other threads:[~2010-03-10 10:32 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-10 7:48 [PATCH 01/20] ASoC: S3C: I2Sv2: Add missing semicolon Jassi Brar
2010-03-10 7:48 ` [PATCH 02/20] ASoC: S3C: I2Sv2: Reject immidiate register value Jassi Brar
2010-03-10 7:48 ` [PATCH 03/20] ASoC: S3C64XX: I2S: Make BCLK independent of sample size Jassi Brar
2010-03-10 7:48 ` [PATCH 04/20] ASoC: S3C: I2Sv2: Remove S3C_IIS_V2_SUPPORTED define Jassi Brar
2010-03-10 7:48 ` [PATCH 05/20] ASoC: S3C: I2Sv2: Unify clock source IDs Jassi Brar
2010-03-10 7:48 ` [PATCH 06/20] ASoC: s3c-i2s-v2 remove unnecessary headers Jassi Brar
2010-03-10 7:48 ` [PATCH 07/20] ASoC: s3c64xx-i2s remove unncessary headers Jassi Brar
2010-03-10 7:48 ` [PATCH 08/20] ASoC: S3C64XX: I2S: Move RATE and FMT defines to header Jassi Brar
2010-03-10 7:48 ` [PATCH 09/20] ASoC: S3C: I2Sv2: Segregate hw_params callback Jassi Brar
2010-03-10 7:48 ` [PATCH 10/20] ASoC: S3C: I2Sv2: Move register definitions closer to driver Jassi Brar
2010-03-10 7:49 ` [PATCH 11/20] ASoC: SAMSUNG: I2S: Add bit definitions Jassi Brar
2010-03-10 7:49 ` [PATCH 12/20] ASoC: S3C2412: I2S: Debug IMS field Jassi Brar
2010-03-10 7:49 ` [PATCH 13/20] ASoC: S3C2412: I2S: Return correct source clock Jassi Brar
2010-03-10 7:49 ` [PATCH 14/20] ASoC: S3C: I2Sv2: Discard redundant field iis_clk Jassi Brar
2010-03-10 7:49 ` [PATCH 15/20] ASoC: S3C: I2Sv2: Unify i2s_get_clock callback Jassi Brar
2010-03-10 7:49 ` [PATCH 16/20] ASoC: S3C64XX: I2S: Use s3c2412 defines Jassi Brar
2010-03-10 7:49 ` [PATCH 17/20] ASoC: S3C: I2Sv2: Define new field for controller features Jassi Brar
2010-03-10 7:49 ` [PATCH 18/20] ASoC: S3C: I2S: Move set_sysclk callback to common code Jassi Brar
2010-03-10 7:49 ` [PATCH 19/20] ASoC: S3C64XX: IISv4: Add CPU driver Jassi Brar
2010-03-10 7:49 ` [PATCH 20/20] ASoC: SMDK64XX: Switch to IISv4 " Jassi Brar
2010-03-10 11:40 ` Mark Brown
2010-03-10 13:05 ` jassi brar
2010-03-10 11:39 ` [PATCH 19/20] ASoC: S3C64XX: IISv4: Add " Mark Brown
2010-03-10 12:57 ` jassi brar
2010-03-10 11:09 ` [PATCH 17/20] ASoC: S3C: I2Sv2: Define new field for controller features Mark Brown
2010-03-10 11:11 ` Mark Brown
2010-03-10 11:00 ` [PATCH 11/20] ASoC: SAMSUNG: I2S: Add bit definitions Mark Brown
2010-03-10 12:24 ` jassi brar
2010-03-10 12:38 ` Mark Brown
2010-03-10 12:49 ` jassi brar
2010-03-10 12:56 ` Mark Brown
2010-03-10 13:03 ` jassi brar
2010-03-10 14:11 ` Mark Brown
2010-04-27 2:55 ` [PATCH 10/20] ASoC: S3C: I2Sv2: Move register definitions closer to driver Ben Dooks
2010-03-10 14:14 ` [PATCH 09/20] ASoC: S3C: I2Sv2: Segregate hw_params callback Mark Brown
2010-03-10 18:46 ` Mark Brown
2010-03-10 10:51 ` [PATCH 08/20] ASoC: S3C64XX: I2S: Move RATE and FMT defines to header Mark Brown
2010-03-10 12:52 ` jassi brar
2010-03-10 12:59 ` Mark Brown
2010-03-10 13:01 ` [PATCH 07/20] ASoC: s3c64xx-i2s remove unncessary headers Mark Brown
2010-03-10 13:01 ` [PATCH 06/20] ASoC: s3c-i2s-v2 remove unnecessary headers Mark Brown
2010-03-10 13:01 ` [PATCH 05/20] ASoC: S3C: I2Sv2: Unify clock source IDs Mark Brown
2010-03-10 10:49 ` [PATCH 04/20] ASoC: S3C: I2Sv2: Remove S3C_IIS_V2_SUPPORTED define Mark Brown
2010-03-10 12:38 ` jassi brar
2010-03-10 12:51 ` Mark Brown
2010-03-10 12:31 ` [PATCH 03/20] ASoC: S3C64XX: I2S: Make BCLK independent of sample size Mark Brown
2010-03-10 12:46 ` jassi brar
2010-03-10 13:00 ` Mark Brown
2010-03-10 10:32 ` Mark Brown [this message]
2010-03-10 12:27 ` [PATCH 02/20] ASoC: S3C: I2Sv2: Reject immidiate register value jassi brar
2010-03-10 12:48 ` Mark Brown
2010-03-10 12:32 ` [PATCH 01/20] ASoC: S3C: I2Sv2: Add missing semicolon Mark Brown
2010-03-10 13:00 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100310103203.GE24422@rakim.wolfsonmicro.main \
--to=broonie@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=ben-linux@fluff.org \
--cc=jassi.brar@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.