From mboxrd@z Thu Jan 1 00:00:00 1970 From: David Miller Date: Wed, 17 Mar 2010 04:34:42 +0000 Subject: Re: Debian Sparc 5.4 on Sun blade 2500 Message-Id: <20100316.213442.69988179.davem@davemloft.net> List-Id: References: <1268768091.1768.29.camel@deblnxsrv254.localdomain> In-Reply-To: <1268768091.1768.29.camel@deblnxsrv254.localdomain> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: sparclinux@vger.kernel.org From: Paul Cao Date: Tue, 16 Mar 2010 19:21:53 -0400 > I have download the iso image. I will install it tomorrow and post the > results here. Meanwhile I tried the DVD myself and it worked with my XVR-500. I looked at the kernel image on the DVD and it has all the necessary PCI device IDs to match your card. So something isn't working right. I've built a test kernel for you to netboot that should provide some more bootup messages than you're getting now. Please find it at: http://vger.kernel.org/~davem/xvr600_test.img When netbooted it should print something like: e3d: Found device at /pci..... when it detects your graphics card. And then it should say something like: fbcon: e3d (fb0) is primary device Console: switching to colour frame buffer device 210x65 If it prints all of that and you still don't get a console then the framebuffer is mapped on XVR-600/XVR-1200 chips different than it is on XVR-500 chips and I'll have to figure that out. It could take a week or so to fix this in that case. Thanks.