From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
To: Ingo Molnar <mingo@elte.hu>
Cc: mingo@redhat.com, hpa@zytor.com, linux-kernel@vger.kernel.org,
tglx@linutronix.de, Steven Rostedt <rostedt@goodmis.org>,
Fr??d??ric Weisbecker <fweisbec@gmail.com>,
linux-tip-commits@vger.kernel.org
Subject: Re: [tip:core/rcu] rcu: Fix holdoff for accelerated GPs for last non-dynticked CPU
Date: Tue, 16 Mar 2010 06:30:15 -0700 [thread overview]
Message-ID: <20100316133015.GD6709@linux.vnet.ibm.com> (raw)
In-Reply-To: <20100316121547.GA5019@elte.hu>
On Tue, Mar 16, 2010 at 01:15:47PM +0100, Ingo Molnar wrote:
>
> Weird: the crash occurs with v2.6.32 as well. Full crashlog attached below.
Hmmm... Well, I guess that my recent patches might be causing some
other bug, but not this particular one. ;-)
As noted below, it looks to me that rcutorture is trying to do what it
is supposed to, do a short delay and then continue through the loop.
Color me confused.
> Ingo
>
> [ 0.000000] Linux version 2.6.32-dirty (mingo@sirius) (gcc version 4.4.1 20091008 (Red Hat 4.4.1-20) (GCC) ) #116 SMP PREEMPT Tue Mar 16 15:12:26 CET 2010
> [ 0.000000] Command line: root=/dev/sda6 earlyprintk=ttyS0,115200 console=ttyS0,115200 debug initcall_debug sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=0 panic=1 3
> [ 0.000000] KERNEL supported cpus:
> [ 0.000000] Intel GenuineIntel
> [ 0.000000] CPU: vendor_id 'AuthenticAMD' unknown, using generic init.
> [ 0.000000] CPU: Your system may be unstable.
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
> [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
> [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
> [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> [ 0.000000] bootconsole [earlyser0] enabled
> [ 0.000000] debug: ignoring loglevel setting.
> [ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x400000000
> [ 0.000000] MTRR default type: uncachable
> [ 0.000000] MTRR fixed ranges enabled:
> [ 0.000000] 00000-9FFFF write-back
> [ 0.000000] A0000-BFFFF uncachable
> [ 0.000000] C0000-C7FFF write-protect
> [ 0.000000] C8000-FFFFF uncachable
> [ 0.000000] MTRR variable ranges enabled:
> [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
> [ 0.000000] 1 disabled
> [ 0.000000] 2 disabled
> [ 0.000000] 3 disabled
> [ 0.000000] 4 disabled
> [ 0.000000] 5 disabled
> [ 0.000000] 6 disabled
> [ 0.000000] 7 disabled
> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> [ 0.000000] initial memory mapped : 0 - 20000000
> [ 0.000000] init_memory_mapping: 0000000000000000-000000003fff0000
> [ 0.000000] 0000000000 - 003fe00000 page 2M
> [ 0.000000] 003fe00000 - 003fff0000 page 4k
> [ 0.000000] kernel direct mapping tables up to 3fff0000 @ 8000-b000
> [ 0.000000] No NUMA configuration found
> [ 0.000000] Faking a node at 0000000000000000-000000003fff0000
> [ 0.000000] Bootmem setup node 0 0000000000000000-000000003fff0000
> [ 0.000000] NODE_DATA [0000000000009000 - 000000000003cfff]
> [ 0.000000] bootmap [000000000003d000 - 0000000000044fff] pages 8
> [ 0.000000] (5 early reservations) ==> bootmem [0000000000 - 003fff0000]
> [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
> [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
> [ 0.000000] #2 [0001000000 - 000770cc78] TEXT DATA BSS ==> [0001000000 - 000770cc78]
> [ 0.000000] #3 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
> [ 0.000000] #4 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000]
> [ 0.000000] found SMP MP-table at [ffff8800000f5680] f5680
> [ 0.000000] [ffffea0000000000-ffffea00019fffff] PMD -> [ffff880007c00000-ffff8800095fffff] on node 0
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0x00000000 -> 0x00001000
> [ 0.000000] DMA32 0x00001000 -> 0x00100000
> [ 0.000000] Normal 0x00100000 -> 0x00100000
> [ 0.000000] Movable zone start PFN for each node
> [ 0.000000] early_node_map[2] active PFN ranges
> [ 0.000000] 0: 0x00000000 -> 0x0000009f
> [ 0.000000] 0: 0x00000100 -> 0x0003fff0
> [ 0.000000] On node 0 totalpages: 262031
> [ 0.000000] DMA zone: 104 pages used for memmap
> [ 0.000000] DMA zone: 100 pages reserved
> [ 0.000000] DMA zone: 3795 pages, LIFO batch:0
> [ 0.000000] DMA32 zone: 6552 pages used for memmap
> [ 0.000000] DMA32 zone: 251480 pages, LIFO batch:31
> [ 0.000000] SFI: Simple Firmware Interface v0.7 http://simplefirmware.org
> [ 0.000000] Intel MultiProcessor Specification v1.4
> [ 0.000000] MPTABLE: OEM ID: OEM00000
> [ 0.000000] MPTABLE: Product ID: PROD00000000
> [ 0.000000] MPTABLE: APIC at: 0xFEE00000
> [ 0.000000] Processor #0 (Bootup-CPU)
> [ 0.000000] Processor #1
> [ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000.
> [ 0.000000] Processors: 2
> [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
> [ 0.000000] nr_irqs_gsi: 24
> [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
> [ 0.000000] NR_CPUS:4096 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
> [ 0.000000] PERCPU: Embedded 476 pages/cpu @ffff880009600000 s1925144 r0 d24552 u2097152
> [ 0.000000] pcpu-alloc: s1925144 r0 d24552 u2097152 alloc=1*2097152
> [ 0.000000] pcpu-alloc: [0] 0 [0] 1
> [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 255275
> [ 0.000000] Policy zone: DMA32
> [ 0.000000] Kernel command line: root=/dev/sda6 earlyprintk=ttyS0,115200 console=ttyS0,115200 debug initcall_debug sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=0 panic=1 3
> [ 0.000000] debug: sysrq always enabled.
> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.000000] Initializing CPU#0
> [ 0.000000] Checking aperture...
> [ 0.000000] No AGP bridge found
> [ 0.000000] Node 0: aperture @ 20000000 size 32 MB
> [ 0.000000] Aperture pointing to e820 RAM. Ignoring.
> [ 0.000000] Memory: 911788k/1048512k available (10324k kernel code, 388k absent, 136336k reserved, 8773k data, 3540k init)
> [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] RCU-based detection of stalled CPUs is enabled.
> [ 0.000000] NR_IRQS:4352
> [ 0.000000] spurious 8259A interrupt: IRQ7.
> [ 0.000000] Console: colour VGA+ 80x25
> [ 0.000000] console [ttyS0] enabled, bootconsole disabled
> [ 0.000000] console [ttyS0] enabled, bootconsole disabled
> [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
> [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
> [ 0.000000] ... MAX_LOCK_DEPTH: 48
> [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
> [ 0.000000] ... CLASSHASH_SIZE: 4096
> [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
> [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
> [ 0.000000] ... CHAINHASH_SIZE: 16384
> [ 0.000000] memory used by lock dependency info: 6367 kB
> [ 0.000000] per task-struct memory footprint: 2688 bytes
> [ 0.000000] ------------------------
> [ 0.000000] | Locking API testsuite:
> [ 0.000000] ----------------------------------------------------------------------------
> [ 0.000000] | spin |wlock |rlock |mutex | wsem | rsem |
> [ 0.000000] --------------------------------------------------------------------------
> [ 0.000000] A-A deadlock: ok | ok | ok | ok | ok | ok |
> [ 0.000000] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok |
> [ 0.000000] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok |
> [ 0.000000] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok |
> [ 0.000000] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
> [ 0.000000] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
> [ 0.000000] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok |
> [ 0.000000] double unlock: ok | ok | ok | ok | ok | ok |
> [ 0.000000] initialize held: ok | ok | ok | ok | ok | ok |
> [ 0.000000] bad unlock order: ok | ok | ok | ok | ok | ok |
> [ 0.000000] --------------------------------------------------------------------------
> [ 0.000000] recursive read-lock: | ok | | ok |
> [ 0.000000] recursive read-lock #2: | ok | | ok |
> [ 0.000000] mixed read-write-lock: | ok | | ok |
> [ 0.000000] mixed write-read-lock: | ok | | ok |
> [ 0.000000] --------------------------------------------------------------------------
> [ 0.000000] hard-irqs-on + irq-safe-A/12: ok | ok | ok |
> [ 0.000000] soft-irqs-on + irq-safe-A/12: ok | ok | ok |
> [ 0.000000] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
> [ 0.000000] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
> [ 0.000000] sirq-safe-A => hirqs-on/12: ok | ok | ok |
> [ 0.000000] sirq-safe-A => hirqs-on/21: ok | ok | ok |
> [ 0.000000] hard-safe-A + irqs-on/12: ok | ok | ok |
> [ 0.000000] soft-safe-A + irqs-on/12: ok | ok | ok |
> [ 0.000000] hard-safe-A + irqs-on/21: ok | ok | ok |
> [ 0.000000] soft-safe-A + irqs-on/21: ok | ok | ok |
> [ 0.000000] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
> [ 0.000000] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
> [ 0.000000] hard-safe-A + unsafe-B #1/132: ok | ok | ok |
> [ 0.000000] soft-safe-A + unsafe-B #1/132: ok | ok | ok |
> [ 0.000000] hard-safe-A + unsafe-B #1/213: ok | ok | ok |
> [ 0.000000] soft-safe-A + unsafe-B #1/213: ok | ok | ok |
> [ 0.000000] hard-safe-A + unsafe-B #1/231: ok | ok | ok |
> [ 0.000000] soft-safe-A + unsafe-B #1/231: ok | ok | ok |
> [ 0.000000] hard-safe-A + unsafe-B #1/312: ok | ok | ok |
> [ 0.000000] soft-safe-A + unsafe-B #1/312: ok | ok | ok |
> [ 0.000000] hard-safe-A + unsafe-B #1/321: ok | ok | ok |
> [ 0.000000] soft-safe-A + unsafe-B #1/321: ok | ok | ok |
> [ 0.000000] hard-safe-A + unsafe-B #2/123: ok | ok | ok |
> [ 0.000000] soft-safe-A + unsafe-B #2/123: ok | ok | ok |
> [ 0.000000] hard-safe-A + unsafe-B #2/132: ok | ok | ok |
> [ 0.000000] soft-safe-A + unsafe-B #2/132: ok | ok | ok |
> [ 0.000000] hard-safe-A + unsafe-B #2/213: ok | ok | ok |
> [ 0.000000] soft-safe-A + unsafe-B #2/213: ok | ok | ok |
> [ 0.000000] hard-safe-A + unsafe-B #2/231: ok | ok | ok |
> [ 0.000000] soft-safe-A + unsafe-B #2/231: ok | ok | ok |
> [ 0.000000] hard-safe-A + unsafe-B #2/312: ok | ok | ok |
> [ 0.000000] soft-safe-A + unsafe-B #2/312: ok | ok | ok |
> [ 0.000000] hard-safe-A + unsafe-B #2/321: ok | ok | ok |
> [ 0.000000] soft-safe-A + unsafe-B #2/321: ok | ok | ok |
> [ 0.000000] hard-irq lock-inversion/123: ok | ok | ok |
> [ 0.000000] soft-irq lock-inversion/123: ok | ok | ok |
> [ 0.000000] hard-irq lock-inversion/132: ok | ok | ok |
> [ 0.000000] soft-irq lock-inversion/132: ok | ok | ok |
> [ 0.000000] hard-irq lock-inversion/213: ok | ok | ok |
> [ 0.000000] soft-irq lock-inversion/213: ok | ok | ok |
> [ 0.000000] hard-irq lock-inversion/231: ok | ok | ok |
> [ 0.000000] soft-irq lock-inversion/231: ok | ok | ok |
> [ 0.000000] hard-irq lock-inversion/312: ok | ok | ok |
> [ 0.000000] soft-irq lock-inversion/312: ok | ok | ok |
> [ 0.000000] hard-irq lock-inversion/321: ok | ok | ok |
> [ 0.000000] soft-irq lock-inversion/321: ok | ok | ok |
> [ 0.000000] hard-irq read-recursion/123: ok |
> [ 0.000000] soft-irq read-recursion/123: ok |
> [ 0.000000] hard-irq read-recursion/132: ok |
> [ 0.000000] soft-irq read-recursion/132: ok |
> [ 0.000000] hard-irq read-recursion/213: ok |
> [ 0.000000] soft-irq read-recursion/213: ok |
> [ 0.000000] hard-irq read-recursion/231: ok |
> [ 0.000000] soft-irq read-recursion/231: ok |
> [ 0.000000] hard-irq read-recursion/312: ok |
> [ 0.000000] soft-irq read-recursion/312: ok |
> [ 0.000000] hard-irq read-recursion/321: ok |
> [ 0.000000] soft-irq read-recursion/321: ok |
> [ 0.000000] -------------------------------------------------------
> [ 0.000000] Good, all 218 testcases passed! |
> [ 0.000000] ---------------------------------
> [ 0.000000] allocated 10485760 bytes of page_cgroup
> [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
> [ 0.000000] ODEBUG: 0 of 0 active objects replaced
> [ 0.000000] Fast TSC calibration using PIT
> [ 0.000000] Detected 2010.507 MHz processor.
> [ 0.010024] Calibrating delay loop (skipped), value calculated using timer frequency.. 4022.55 BogoMIPS (lpj=6701690)
> [ 0.017398] Security Framework initialized
> [ 0.020018] TOMOYO Linux initialized
> [ 0.027078] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
> [ 0.030804] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
> [ 0.033809] Mount-cache hash table entries: 256
> [ 0.038317] Initializing cgroup subsys debug
> [ 0.040009] Initializing cgroup subsys ns
> [ 0.043342] Initializing cgroup subsys memory
> [ 0.046776] Initializing cgroup subsys freezer
> [ 0.050241] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> [ 0.053339] CPU: L2 Cache: 512K (64 bytes/line)
> [ 0.056673] mce: CPU supports 5 MCE banks
> [ 0.060007] MCE: unknown CPU type - not enabling MCE support.
> [ 0.063341] numa_add_cpu cpu 0 node 0: mask now 0
> [ 0.066672] Performance Events:
> [ 0.070053] Freeing SMP alternatives: 58k freed
> [ 0.073409] ftrace: converting mcount calls to 0f 1f 44 00 00
> [ 0.076676] ftrace: allocating 44576 entries in 175 pages
> [ 0.083750] Setting APIC routing to flat
> [ 0.086742] ExtINT not setup in hardware but reported by MP table
> [ 0.090890] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
> [ 0.093332] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
> [ 0.093332] ...trying to set up timer (IRQ0) through the 8259A ...
> [ 0.093332] ..... (found apic 0 pin 0) ...
> [ 0.129425] ....... works.
> [ 0.130004] CPU0: AuthenticAMD AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
> [ 0.246691] calling migration_init+0x0/0x59 @ 1
> [ 0.250234] initcall migration_init+0x0/0x59 returned 0 after 0 usecs
> [ 0.253340] calling spawn_ksoftirqd+0x0/0x5a @ 1
> [ 0.260051] initcall spawn_ksoftirqd+0x0/0x5a returned 0 after 3255 usecs
> [ 0.263341] calling init_call_single_data+0x0/0xb6 @ 1
> [ 0.266680] initcall init_call_single_data+0x0/0xb6 returned 0 after 0 usecs
> [ 0.270007] calling spawn_softlockup_task+0x0/0x75 @ 1
> [ 0.273437] initcall spawn_softlockup_task+0x0/0x75 returned 0 after 0 usecs
> [ 0.276673] calling relay_init+0x0/0x8 @ 1
> [ 0.280006] initcall relay_init+0x0/0x8 returned 0 after 0 usecs
> [ 0.283347] calling tracer_alloc_buffers+0x0/0x26d @ 1
> [ 0.286885] Testing tracer nop: PASSED
> [ 0.290736] initcall tracer_alloc_buffers+0x0/0x26d returned 0 after 3255 usecs
> [ 0.293339] calling init_trace_printk+0x0/0x8 @ 1
> [ 0.296672] initcall init_trace_printk+0x0/0x8 returned 0 after 0 usecs
> [ 0.300006] calling trace_workqueue_early_init+0x0/0x12d @ 1
> [ 0.303417] initcall trace_workqueue_early_init+0x0/0x12d returned 0 after 0 usecs
> [ 0.316684] lockdep: fixing up alternatives.
> [ 0.320156] Booting processor 1 APIC 0x1 ip 0x6000
> [ 0.013332] Initializing CPU#1
> [ 0.013332] Calibrating delay using timer specific routine.. 4021.84 BogoMIPS (lpj=6700559)
> [ 0.013332] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> [ 0.013332] CPU: L2 Cache: 512K (64 bytes/line)
> [ 0.013332] numa_add_cpu cpu 1 node 0: mask now 0-1
> [ 0.420082] CPU1: AuthenticAMD AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
> [ 0.431283] Brought up 2 CPUs
> [ 0.433339] Total of 2 processors activated (8044.40 BogoMIPS).
> [ 0.437517] CPU0 attaching sched-domain:
> [ 0.440010] domain 0: span 0-1 level CPU
> [ 0.446671] groups: 0 1
> [ 0.450032] CPU1 attaching sched-domain:
> [ 0.453341] domain 0: span 0-1 level CPU
> [ 0.456671] groups: 1 0
> [ 0.461314] calling init_mmap_min_addr+0x0/0x16 @ 1
> [ 0.463349] initcall init_mmap_min_addr+0x0/0x16 returned 0 after 0 usecs
> [ 0.466674] calling init_cpufreq_transition_notifier_list+0x0/0x1b @ 1
> [ 0.470011] initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 usecs
> [ 0.473339] calling net_ns_init+0x0/0x100 @ 1
> [ 0.476698] initcall net_ns_init+0x0/0x100 returned 0 after 0 usecs
> [ 0.480006] calling cpufreq_tsc+0x0/0x28 @ 1
> [ 0.483339] initcall cpufreq_tsc+0x0/0x28 returned 0 after 0 usecs
> [ 0.486672] calling pci_reboot_init+0x0/0x8 @ 1
> [ 0.490005] initcall pci_reboot_init+0x0/0x8 returned 0 after 0 usecs
> [ 0.493339] calling init_smp_flush+0x0/0x42 @ 1
> [ 0.496673] initcall init_smp_flush+0x0/0x42 returned 0 after 0 usecs
> [ 0.500006] calling sysctl_init+0x0/0x16 @ 1
> [ 0.503346] initcall sysctl_init+0x0/0x16 returned 0 after 0 usecs
> [ 0.506671] calling ksysfs_init+0x0/0xc0 @ 1
> [ 0.510054] initcall ksysfs_init+0x0/0xc0 returned 0 after 0 usecs
> [ 0.513339] calling async_init+0x0/0x60 @ 1
> [ 0.516776] initcall async_init+0x0/0x60 returned 0 after 0 usecs
> [ 0.520006] calling init_jiffies_clocksource+0x0/0x12 @ 1
> [ 0.523352] initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 usecs
> [ 0.526672] calling init_zero_pfn+0x0/0x35 @ 1
> [ 0.530005] initcall init_zero_pfn+0x0/0x35 returned 0 after 0 usecs
> [ 0.533338] calling filelock_init+0x0/0x2e @ 1
> [ 0.536752] initcall filelock_init+0x0/0x2e returned 0 after 0 usecs
> [ 0.540005] calling init_script_binfmt+0x0/0x14 @ 1
> [ 0.543351] initcall init_script_binfmt+0x0/0x14 returned 0 after 0 usecs
> [ 0.546671] calling init_elf_binfmt+0x0/0x14 @ 1
> [ 0.550005] initcall init_elf_binfmt+0x0/0x14 returned 0 after 0 usecs
> [ 0.553338] calling init_compat_elf_binfmt+0x0/0x14 @ 1
> [ 0.556672] initcall init_compat_elf_binfmt+0x0/0x14 returned 0 after 0 usecs
> [ 0.560005] calling debugfs_init+0x0/0x5c @ 1
> [ 0.563350] initcall debugfs_init+0x0/0x5c returned 0 after 0 usecs
> [ 0.566672] calling securityfs_init+0x0/0x53 @ 1
> [ 0.570015] initcall securityfs_init+0x0/0x53 returned 0 after 0 usecs
> [ 0.573338] calling random32_init+0x0/0xcd @ 1
> [ 0.576672] initcall random32_init+0x0/0xcd returned 0 after 0 usecs
> [ 0.580005] calling regulator_init+0x0/0x2e @ 1
> [ 0.583337] regulator: core version 0.5
> [ 0.586727] initcall regulator_init+0x0/0x2e returned 0 after 3255 usecs
> [ 0.590005] calling cpufreq_core_init+0x0/0x9b @ 1
> [ 0.593347] initcall cpufreq_core_init+0x0/0x9b returned 0 after 0 usecs
> [ 0.596671] calling cpuidle_init+0x0/0x40 @ 1
> [ 0.600019] initcall cpuidle_init+0x0/0x40 returned 0 after 0 usecs
> [ 0.603338] calling sock_init+0x0/0x5e @ 1
> [ 0.607051] initcall sock_init+0x0/0x5e returned 0 after 0 usecs
> [ 0.610006] calling netpoll_init+0x0/0x14 @ 1
> [ 0.613339] initcall netpoll_init+0x0/0x14 returned 0 after 0 usecs
> [ 0.616671] calling netlink_proto_init+0x0/0x14a @ 1
> [ 0.620076] NET: Registered protocol family 16
> [ 0.623416] initcall netlink_proto_init+0x0/0x14a returned 0 after 3255 usecs
> [ 0.626672] calling bdi_class_init+0x0/0x41 @ 1
> [ 0.630215] initcall bdi_class_init+0x0/0x41 returned 0 after 0 usecs
> [ 0.633339] calling kobject_uevent_init+0x0/0x54 @ 1
> [ 0.636690] initcall kobject_uevent_init+0x0/0x54 returned 0 after 0 usecs
> [ 0.640005] calling gpiolib_sysfs_init+0x0/0xa1 @ 1
> [ 0.643441] initcall gpiolib_sysfs_init+0x0/0xa1 returned 0 after 0 usecs
> [ 0.646672] calling pcibus_class_init+0x0/0x19 @ 1
> [ 0.650069] initcall pcibus_class_init+0x0/0x19 returned 0 after 0 usecs
> [ 0.653338] calling pci_driver_init+0x0/0x12 @ 1
> [ 0.656765] initcall pci_driver_init+0x0/0x12 returned 0 after 0 usecs
> [ 0.660005] calling backlight_class_init+0x0/0x5d @ 1
> [ 0.663406] initcall backlight_class_init+0x0/0x5d returned 0 after 0 usecs
> [ 0.666671] calling video_output_class_init+0x0/0x19 @ 1
> [ 0.670070] initcall video_output_class_init+0x0/0x19 returned 0 after 0 usecs
> [ 0.673338] calling tty_class_init+0x0/0x38 @ 1
> [ 0.676744] initcall tty_class_init+0x0/0x38 returned 0 after 0 usecs
> [ 0.680006] calling vtconsole_class_init+0x0/0xc2 @ 1
> [ 0.683542] initcall vtconsole_class_init+0x0/0xc2 returned 0 after 0 usecs
> [ 0.686673] calling register_node_type+0x0/0x46 @ 1
> [ 0.690081] initcall register_node_type+0x0/0x46 returned 0 after 0 usecs
> [ 0.693338] calling spi_init+0x0/0xb0 @ 1
> [ 0.696827] initcall spi_init+0x0/0xb0 returned 0 after 0 usecs
> [ 0.700005] calling i2c_init+0x0/0x6a @ 1
> [ 0.703524] i2c-core: driver [dummy] registered
> [ 0.706691] initcall i2c_init+0x0/0x6a returned 0 after 3255 usecs
> [ 0.710005] calling amd_postcore_init+0x0/0xb2 @ 1
> [ 0.713338] initcall amd_postcore_init+0x0/0xb2 returned 0 after 0 usecs
> [ 0.716672] calling arch_kdebugfs_init+0x0/0x2a8 @ 1
> [ 0.723357] initcall arch_kdebugfs_init+0x0/0x2a8 returned 0 after 3255 usecs
> [ 0.726673] calling mtrr_if_init+0x0/0x61 @ 1
> [ 0.730018] initcall mtrr_if_init+0x0/0x61 returned 0 after 0 usecs
> [ 0.733338] calling arch_init_ftrace_syscalls+0x0/0xe3 @ 1
> [ 0.737746] initcall arch_init_ftrace_syscalls+0x0/0xe3 returned 0 after 0 usecs
> [ 0.740005] calling pci_arch_init+0x0/0x40 @ 1
> [ 0.746670] PCI: Using configuration type 1 for base access
> [ 0.750005] initcall pci_arch_init+0x0/0x40 returned 0 after 6510 usecs
> [ 0.753338] calling topology_init+0x0/0xf0 @ 1
> [ 0.756911] initcall topology_init+0x0/0xf0 returned 0 after 0 usecs
> [ 0.760005] calling mtrr_init_finialize+0x0/0x3d @ 1
> [ 0.763338] initcall mtrr_init_finialize+0x0/0x3d returned 0 after 0 usecs
> [ 0.766671] calling param_sysfs_init+0x0/0x3b2 @ 1
> [ 0.801308] initcall param_sysfs_init+0x0/0x3b2 returned 0 after 29296 usecs
> [ 0.803340] calling pm_sysrq_init+0x0/0x1e @ 1
> [ 0.806684] initcall pm_sysrq_init+0x0/0x1e returned 0 after 0 usecs
> [ 0.810005] calling audit_watch_init+0x0/0x2f @ 1
> [ 0.813341] initcall audit_watch_init+0x0/0x2f returned 0 after 0 usecs
> [ 0.816672] calling init_slow_work+0x0/0x70 @ 1
> [ 0.820041] initcall init_slow_work+0x0/0x70 returned 0 after 0 usecs
> [ 0.823338] calling default_bdi_init+0x0/0xc6 @ 1
> [ 0.830250] initcall default_bdi_init+0x0/0xc6 returned 0 after 3255 usecs
> [ 0.833339] calling init_bio+0x0/0xda @ 1
> [ 0.836945] bio: create slab <bio-0> at 0
> [ 0.840101] initcall init_bio+0x0/0xda returned 0 after 3255 usecs
> [ 0.843338] calling fsnotify_init+0x0/0x12 @ 1
> [ 0.846675] initcall fsnotify_init+0x0/0x12 returned 0 after 0 usecs
> [ 0.850004] calling fsnotify_notification_init+0x0/0x68 @ 1
> [ 0.853455] initcall fsnotify_notification_init+0x0/0x68 returned 0 after 0 usecs
> [ 0.856672] calling cryptomgr_init+0x0/0x12 @ 1
> [ 0.860005] initcall cryptomgr_init+0x0/0x12 returned 0 after 0 usecs
> [ 0.863338] calling blk_settings_init+0x0/0x2a @ 1
> [ 0.866672] initcall blk_settings_init+0x0/0x2a returned 0 after 0 usecs
> [ 0.870005] calling blk_ioc_init+0x0/0x2a @ 1
> [ 0.873377] initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs
> [ 0.876671] calling blk_softirq_init+0x0/0x80 @ 1
> [ 0.880004] initcall blk_softirq_init+0x0/0x80 returned 0 after 0 usecs
> [ 0.883337] calling blk_iopoll_setup+0x0/0xa5 @ 1
> [ 0.886671] initcall blk_iopoll_setup+0x0/0xa5 returned 0 after 0 usecs
> [ 0.890004] calling genhd_device_init+0x0/0x66 @ 1
> [ 0.893551] initcall genhd_device_init+0x0/0x66 returned 0 after 0 usecs
> [ 0.896673] calling gpiolib_debugfs_init+0x0/0x24 @ 1
> [ 0.900062] initcall gpiolib_debugfs_init+0x0/0x24 returned 0 after 0 usecs
> [ 0.903338] calling mc33880_init+0x0/0x12 @ 1
> [ 0.906775] initcall mc33880_init+0x0/0x12 returned 0 after 0 usecs
> [ 0.910005] calling mcp23s08_init+0x0/0x12 @ 1
> [ 0.913412] initcall mcp23s08_init+0x0/0x12 returned 0 after 0 usecs
> [ 0.916671] calling pca953x_init+0x0/0x14 @ 1
> [ 0.920078] i2c-core: driver [pca953x] registered
> [ 0.923341] initcall pca953x_init+0x0/0x14 returned 0 after 3255 usecs
> [ 0.926671] calling pcf857x_init+0x0/0x14 @ 1
> [ 0.930075] i2c-core: driver [pcf857x] registered
> [ 0.933340] initcall pcf857x_init+0x0/0x14 returned 0 after 3255 usecs
> [ 0.936671] calling gpio_twl4030_init+0x0/0x12 @ 1
> [ 0.940087] initcall gpio_twl4030_init+0x0/0x12 returned 0 after 0 usecs
> [ 0.943338] calling wm831x_gpio_init+0x0/0x12 @ 1
> [ 0.946744] initcall wm831x_gpio_init+0x0/0x12 returned 0 after 0 usecs
> [ 0.950006] calling pci_slot_init+0x0/0x4b @ 1
> [ 0.953348] initcall pci_slot_init+0x0/0x4b returned 0 after 0 usecs
> [ 0.956671] calling regulator_fixed_voltage_init+0x0/0x12 @ 1
> [ 0.960086] initcall regulator_fixed_voltage_init+0x0/0x12 returned 0 after 0 usecs
> [ 0.963338] calling twl4030reg_init+0x0/0x12 @ 1
> [ 0.966744] initcall twl4030reg_init+0x0/0x12 returned 0 after 0 usecs
> [ 0.970005] calling wm831x_dcdc_init+0x0/0x88 @ 1
> [ 0.973629] initcall wm831x_dcdc_init+0x0/0x88 returned 0 after 0 usecs
> [ 0.976672] calling wm831x_isink_init+0x0/0x31 @ 1
> [ 0.980086] initcall wm831x_isink_init+0x0/0x31 returned 0 after 0 usecs
> [ 0.983338] calling wm831x_ldo_init+0x0/0x68 @ 1
> [ 0.986891] initcall wm831x_ldo_init+0x0/0x68 returned 0 after 0 usecs
> [ 0.990005] calling pcap_regulator_init+0x0/0x12 @ 1
> [ 0.993420] initcall pcap_regulator_init+0x0/0x12 returned 0 after 0 usecs
> [ 0.996671] calling tps_65023_init+0x0/0x14 @ 1
> [ 1.000076] i2c-core: driver [tps65023] registered
> [ 1.003340] initcall tps_65023_init+0x0/0x14 returned 0 after 3255 usecs
> [ 1.006670] calling tps_6507x_init+0x0/0x14 @ 1
> [ 1.010076] i2c-core: driver [tps6507x] registered
> [ 1.013340] initcall tps_6507x_init+0x0/0x14 returned 0 after 3255 usecs
> [ 1.016670] calling misc_init+0x0/0xb7 @ 1
> [ 1.020110] initcall misc_init+0x0/0xb7 returned 0 after 0 usecs
> [ 1.023380] calling vga_arb_device_init+0x0/0x80 @ 1
> [ 1.026891] vgaarb: loaded
> [ 1.029600] initcall vga_arb_device_init+0x0/0x80 returned 0 after 0 usecs
> [ 1.030005] calling tifm_init+0x0/0x85 @ 1
> [ 1.033513] initcall tifm_init+0x0/0x85 returned 0 after 0 usecs
> [ 1.036672] calling wm831x_i2c_init+0x0/0x33 @ 1
> [ 1.040075] i2c-core: driver [wm831x] registered
> [ 1.043340] initcall wm831x_i2c_init+0x0/0x33 returned 0 after 3255 usecs
> [ 1.046671] calling wm8350_i2c_init+0x0/0x14 @ 1
> [ 1.050074] i2c-core: driver [wm8350] registered
> [ 1.053340] initcall wm8350_i2c_init+0x0/0x14 returned 0 after 3255 usecs
> [ 1.056671] calling tps_init+0x0/0xb2 @ 1
> [ 1.060003] tps65010: version 2 May 2005
> [ 1.063408] i2c-core: driver [tps65010] registered
> [ 1.066795] i2c-core: driver [tps65010] unregistered
> [ 1.083417] i2c-core: driver [tps65010] registered
> [ 1.086761] i2c-core: driver [tps65010] unregistered
> [ 1.103416] i2c-core: driver [tps65010] registered
> [ 1.106761] i2c-core: driver [tps65010] unregistered
> [ 1.110003] tps65010: no chip?
> [ 1.113338] initcall tps_init+0x0/0xb2 returned -19 after 52083 usecs
> [ 1.116671] calling twl4030_init+0x0/0x14 @ 1
> [ 1.120074] i2c-core: driver [twl4030] registered
> [ 1.123340] initcall twl4030_init+0x0/0x14 returned 0 after 3255 usecs
> [ 1.126671] calling ezx_pcap_init+0x0/0x12 @ 1
> [ 1.130085] initcall ezx_pcap_init+0x0/0x12 returned 0 after 0 usecs
> [ 1.133338] calling init_scsi+0x0/0x91 @ 1
> [ 1.137735] SCSI subsystem initialized
> [ 1.140007] initcall init_scsi+0x0/0x91 returned 0 after 3255 usecs
> [ 1.143338] calling ata_init+0x0/0x36c @ 1
> [ 1.146801] libata version 3.00 loaded.
> [ 1.150006] initcall ata_init+0x0/0x36c returned 0 after 3255 usecs
> [ 1.153337] calling phy_init+0x0/0x2e @ 1
> [ 1.156920] initcall phy_init+0x0/0x2e returned 0 after 0 usecs
> [ 1.160006] calling twl4030_usb_init+0x0/0x12 @ 1
> [ 1.163417] initcall twl4030_usb_init+0x0/0x12 returned 0 after 0 usecs
> [ 1.166671] calling nop_usb_xceiv_init+0x0/0x12 @ 1
> [ 1.170087] initcall nop_usb_xceiv_init+0x0/0x12 returned 0 after 0 usecs
> [ 1.173338] calling usb_init+0x0/0x15a @ 1
> [ 1.176880] usbcore: registered new interface driver usbfs
> [ 1.180086] usbcore: registered new interface driver hub
> [ 1.183423] usbcore: registered new device driver usb
> [ 1.186672] initcall usb_init+0x0/0x15a returned 0 after 9765 usecs
> [ 1.190004] calling serio_init+0x0/0x86 @ 1
> [ 1.193521] initcall serio_init+0x0/0x86 returned 0 after 0 usecs
> [ 1.196672] calling gameport_init+0x0/0x86 @ 1
> [ 1.200173] initcall gameport_init+0x0/0x86 returned 0 after 0 usecs
> [ 1.203338] calling input_init+0x0/0x13d @ 1
> [ 1.206778] initcall input_init+0x0/0x13d returned 0 after 0 usecs
> [ 1.210004] calling rtc_init+0x0/0x6c @ 1
> [ 1.213403] initcall rtc_init+0x0/0x6c returned 0 after 0 usecs
> [ 1.216671] calling pps_init+0x0/0xb1 @ 1
> [ 1.220070] LinuxPPS API ver. 1 registered
> [ 1.223336] Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
> [ 1.226670] initcall pps_init+0x0/0xb1 returned 0 after 6510 usecs
> [ 1.230004] calling power_supply_class_init+0x0/0x38 @ 1
> [ 1.233403] initcall power_supply_class_init+0x0/0x38 returned 0 after 0 usecs
> [ 1.236670] calling hwmon_init+0x0/0x106 @ 1
> [ 1.240072] initcall hwmon_init+0x0/0x106 returned 0 after 0 usecs
> [ 1.243337] calling thermal_init+0x0/0x57 @ 1
> [ 1.246734] initcall thermal_init+0x0/0x57 returned 0 after 0 usecs
> [ 1.250004] calling md_init+0x0/0xd0 @ 1
> [ 1.253362] initcall md_init+0x0/0xd0 returned 0 after 0 usecs
> [ 1.256673] calling mmc_init+0x0/0x76 @ 1
> [ 1.263407] initcall mmc_init+0x0/0x76 returned 0 after 3255 usecs
> [ 1.266671] calling leds_init+0x0/0x40 @ 1
> [ 1.270069] initcall leds_init+0x0/0x40 returned 0 after 0 usecs
> [ 1.273338] calling pci_subsys_init+0x0/0x113 @ 1
> [ 1.276669] PCI: Probing PCI hardware
> [ 1.280041] PCI: Probing PCI hardware (bus 00)
> [ 1.283488] PCI: Scanning bus 0000:00
> [ 1.290059] pci 0000:00:00.0: found [10de:005e] class 000580 header type 00
> [ 1.293418] pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x1a2
> [ 1.296752] pci 0000:00:01.0: found [10de:0050] class 000601 header type 00
> [ 1.300057] pci 0000:00:01.0: calling nvidia_force_enable_hpet+0x0/0xbf
> [ 1.303336] HPET not enabled in BIOS. You might try hpet=force boot option
> [ 1.306671] pci 0000:00:01.0: calling quirk_resource_alignment+0x0/0x1a2
> [ 1.310035] pci 0000:00:01.1: found [10de:0052] class 000c05 header type 00
> [ 1.313359] pci 0000:00:01.1: reg 10 io port: [0xdc00-0xdc1f]
> [ 1.316694] pci 0000:00:01.1: reg 20 io port: [0x4c00-0x4c3f]
> [ 1.320009] pci 0000:00:01.1: reg 24 io port: [0x4c40-0x4c7f]
> [ 1.323348] pci 0000:00:01.1: calling quirk_resource_alignment+0x0/0x1a2
> [ 1.326689] pci 0000:00:01.1: PME# supported from D3hot D3cold
> [ 1.330006] pci 0000:00:01.1: PME# disabled
> [ 1.333391] pci 0000:00:02.0: found [10de:005a] class 000c03 header type 00
> [ 1.336692] pci 0000:00:02.0: reg 10 32bit mmio: [0xda102000-0xda102fff]
> [ 1.340044] pci 0000:00:02.0: calling quirk_resource_alignment+0x0/0x1a2
> [ 1.343355] pci 0000:00:02.0: supports D1 D2
> [ 1.346669] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 1.350006] pci 0000:00:02.0: PME# disabled
> [ 1.353371] pci 0000:00:02.1: found [10de:005b] class 000c03 header type 00
> [ 1.356699] pci 0000:00:02.1: reg 10 32bit mmio: [0xfeb00000-0xfeb000ff]
> [ 1.360044] pci 0000:00:02.1: calling quirk_resource_alignment+0x0/0x1a2
> [ 1.363365] pci 0000:00:02.1: supports D1 D2
> [ 1.366669] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
> [ 1.370006] pci 0000:00:02.1: PME# disabled
> [ 1.373398] pci 0000:00:04.0: found [10de:0059] class 000401 header type 00
> [ 1.376692] pci 0000:00:04.0: reg 10 io port: [0xd400-0xd4ff]
> [ 1.380009] pci 0000:00:04.0: reg 14 io port: [0xd800-0xd8ff]
> [ 1.383343] pci 0000:00:04.0: reg 18 32bit mmio: [0xda101000-0xda101fff]
> [ 1.386700] pci 0000:00:04.0: calling quirk_resource_alignment+0x0/0x1a2
> [ 1.390022] pci 0000:00:04.0: supports D1 D2
> [ 1.393371] pci 0000:00:06.0: found [10de:0053] class 000101 header type 00
> [ 1.400018] pci 0000:00:06.0: reg 20 io port: [0xf000-0xf00f]
> [ 1.403355] pci 0000:00:06.0: calling quirk_resource_alignment+0x0/0x1a2
> [ 1.406723] pci 0000:00:09.0: found [10de:005c] class 000604 header type 01
> [ 1.410029] pci 0000:00:09.0: calling quirk_resource_alignment+0x0/0x1a2
> [ 1.413368] pci 0000:00:0a.0: found [10de:0057] class 000680 header type 00
> [ 1.416692] pci 0000:00:0a.0: reg 10 32bit mmio: [0xda100000-0xda100fff]
> [ 1.420010] pci 0000:00:0a.0: reg 14 io port: [0xd000-0xd007]
> [ 1.423371] pci 0000:00:0a.0: calling quirk_resource_alignment+0x0/0x1a2
> [ 1.426689] pci 0000:00:0a.0: supports D1 D2
> [ 1.430002] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 1.436674] pci 0000:00:0a.0: PME# disabled
> [ 1.440043] pci 0000:00:0b.0: found [10de:005d] class 000604 header type 01
> [ 1.443387] pci 0000:00:0b.0: calling quirk_resource_alignment+0x0/0x1a2
> [ 1.446705] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 1.450005] pci 0000:00:0b.0: PME# disabled
> [ 1.453384] pci 0000:00:0c.0: found [10de:005d] class 000604 header type 01
> [ 1.456721] pci 0000:00:0c.0: calling quirk_resource_alignment+0x0/0x1a2
> [ 1.460038] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 1.463339] pci 0000:00:0c.0: PME# disabled
> [ 1.466727] pci 0000:00:0d.0: found [10de:005d] class 000604 header type 01
> [ 1.470054] pci 0000:00:0d.0: calling quirk_resource_alignment+0x0/0x1a2
> [ 1.473372] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 1.476672] pci 0000:00:0d.0: PME# disabled
> [ 1.480050] pci 0000:00:0e.0: found [10de:005d] class 000604 header type 01
> [ 1.483387] pci 0000:00:0e.0: calling quirk_resource_alignment+0x0/0x1a2
> [ 1.486705] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 1.490005] pci 0000:00:0e.0: PME# disabled
> [ 1.493409] pci 0000:00:18.0: found [1022:1100] class 000600 header type 00
> [ 1.496715] pci 0000:00:18.0: calling quirk_resource_alignment+0x0/0x1a2
> [ 1.500046] pci 0000:00:18.1: found [1022:1101] class 000600 header type 00
> [ 1.503381] pci 0000:00:18.1: calling quirk_resource_alignment+0x0/0x1a2
> [ 1.506739] pci 0000:00:18.2: found [1022:1102] class 000600 header type 00
> [ 1.510048] pci 0000:00:18.2: calling quirk_resource_alignment+0x0/0x1a2
> [ 1.513363] pci 0000:00:18.3: found [1022:1103] class 000600 header type 00
> [ 1.516715] pci 0000:00:18.3: calling quirk_resource_alignment+0x0/0x1a2
> [ 1.520052] PCI: Fixups for bus 0000:00
> [ 1.523339] pci 0000:00:09.0: scanning behind bridge, config 050500, pass 0
> [ 1.523340] Clocksource tsc unstable (delta = 314902817 ns)
> [ 1.526686] PCI: Scanning bus 0000:05
> [ 1.530054] pci 0000:05:07.0: found [10ec:8139] class 000200 header type 00
> [ 1.533362] pci 0000:05:07.0: reg 10 io port: [0xc000-0xc0ff]
> [ 1.536677] pci 0000:05:07.0: reg 14 32bit mmio: [0xda000000-0xda0000ff]
> [ 1.540044] pci 0000:05:07.0: calling quirk_resource_alignment+0x0/0x1a2
> [ 1.543359] pci 0000:05:07.0: supports D1 D2
> [ 1.546669] pci 0000:05:07.0: PME# supported from D1 D2 D3hot
> [ 1.550006] pci 0000:05:07.0: PME# disabled
> [ 1.553444] PCI: Fixups for bus 0000:05
> [ 1.556669] pci 0000:00:09.0: transparent bridge
> [ 1.560006] pci 0000:00:09.0: bridge io port: [0xc000-0xcfff]
> [ 1.563339] pci 0000:00:09.0: bridge 32bit mmio: [0xda000000-0xda0fffff]
> [ 1.566672] PCI: Bus scan for 0000:05 returning with max=05
> [ 1.570006] pci 0000:00:0b.0: scanning behind bridge, config 040400, pass 0
> [ 1.573351] PCI: Scanning bus 0000:04
> [ 1.576787] PCI: Fixups for bus 0000:04
> [ 1.580017] PCI: Bus scan for 0000:04 returning with max=04
> [ 1.583339] pci 0000:00:0c.0: scanning behind bridge, config 030300, pass 0
> [ 1.586685] PCI: Scanning bus 0000:03
> [ 1.590121] PCI: Fixups for bus 0000:03
> [ 1.593351] PCI: Bus scan for 0000:03 returning with max=03
> [ 1.596673] pci 0000:00:0d.0: scanning behind bridge, config 020200, pass 0
> [ 1.600018] PCI: Scanning bus 0000:02
> [ 1.603454] PCI: Fixups for bus 0000:02
> [ 1.606684] PCI: Bus scan for 0000:02 returning with max=02
> [ 1.610006] pci 0000:00:0e.0: scanning behind bridge, config 010100, pass 0
> [ 1.613351] PCI: Scanning bus 0000:01
> [ 1.616698] pci 0000:01:00.0: found [1002:5b60] class 000300 header type 00
> [ 1.620014] pci 0000:01:00.0: calling quirk_no_ata_d3+0x0/0x20
> [ 1.623347] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xd0000000-0xd7ffffff]
> [ 1.626677] pci 0000:01:00.0: reg 14 io port: [0xb000-0xb0ff]
> [ 1.630010] pci 0000:01:00.0: reg 18 32bit mmio: [0xd9000000-0xd900ffff]
> [ 1.633364] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
> [ 1.636674] pci 0000:01:00.0: calling quirk_resource_alignment+0x0/0x1a2
> [ 1.640035] pci 0000:01:00.0: supports D1 D2
> [ 1.643382] pci 0000:01:00.1: found [1002:5b70] class 000380 header type 00
> [ 1.646680] pci 0000:01:00.1: calling quirk_no_ata_d3+0x0/0x20
> [ 1.650012] pci 0000:01:00.1: reg 10 32bit mmio: [0xd9010000-0xd901ffff]
> [ 1.653383] pci 0000:01:00.1: calling quirk_resource_alignment+0x0/0x1a2
> [ 1.656697] pci 0000:01:00.1: supports D1 D2
> [ 1.660048] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
> [ 1.663553] PCI: Fixups for bus 0000:01
> [ 1.666675] pci 0000:00:0e.0: bridge io port: [0xb000-0xbfff]
> [ 1.670005] pci 0000:00:0e.0: bridge 32bit mmio: [0xd8000000-0xd9ffffff]
> [ 1.673342] pci 0000:00:0e.0: bridge 64bit mmio pref: [0xd0000000-0xd7ffffff]
> [ 1.676669] PCI: Bus scan for 0000:01 returning with max=01
> [ 1.680006] pci 0000:00:09.0: scanning behind bridge, config 050500, pass 1
> [ 1.683342] pci 0000:00:0b.0: scanning behind bridge, config 040400, pass 1
> [ 1.686675] pci 0000:00:0c.0: scanning behind bridge, config 030300, pass 1
> [ 1.690008] pci 0000:00:0d.0: scanning behind bridge, config 020200, pass 1
> [ 1.693342] pci 0000:00:0e.0: scanning behind bridge, config 010100, pass 1
> [ 1.696673] PCI: Bus scan for 0000:00 returning with max=05
> [ 1.703618] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
> [ 1.707286] pci 0000:00:00.0: default IRQ router [10de:005e]
> [ 1.710540] initcall pci_subsys_init+0x0/0x113 returned 0 after 423176 usecs
> [ 1.713337] calling proto_init+0x0/0x12 @ 1
> [ 1.716685] initcall proto_init+0x0/0x12 returned 0 after 0 usecs
> [ 1.720003] calling net_dev_init+0x0/0x1a1 @ 1
> [ 1.723911] initcall net_dev_init+0x0/0x1a1 returned 0 after 0 usecs
> [ 1.726670] calling neigh_init+0x0/0x71 @ 1
> [ 1.730004] initcall neigh_init+0x0/0x71 returned 0 after 0 usecs
> [ 1.733336] calling pktsched_init+0x0/0xd0 @ 1
> [ 1.736695] initcall pktsched_init+0x0/0xd0 returned 0 after 0 usecs
> [ 1.740003] calling tc_filter_init+0x0/0x4c @ 1
> [ 1.743336] initcall tc_filter_init+0x0/0x4c returned 0 after 0 usecs
> [ 1.746669] calling tc_action_init+0x0/0x4c @ 1
> [ 1.750003] initcall tc_action_init+0x0/0x4c returned 0 after 0 usecs
> [ 1.753336] calling genl_init+0x0/0x8f @ 1
> [ 1.756788] initcall genl_init+0x0/0x8f returned 0 after 0 usecs
> [ 1.760003] calling cipso_v4_init+0x0/0x88 @ 1
> [ 1.763359] initcall cipso_v4_init+0x0/0x88 returned 0 after 0 usecs
> [ 1.766670] calling netlbl_init+0x0/0x81 @ 1
> [ 1.770001] NetLabel: Initializing
> [ 1.773335] NetLabel: domain hash size = 128
> [ 1.776668] NetLabel: protocols = UNLABELED CIPSOv4
> [ 1.780205] NetLabel: unlabeled traffic allowed by default
> [ 1.783337] initcall netlbl_init+0x0/0x81 returned 0 after 13020 usecs
> [ 1.786669] calling rfkill_init+0x0/0x5f @ 1
> [ 1.790161] initcall rfkill_init+0x0/0x5f returned 0 after 0 usecs
> [ 1.793337] calling wpan_phy_class_init+0x0/0x19 @ 1
> [ 1.796735] initcall wpan_phy_class_init+0x0/0x19 returned 0 after 0 usecs
> [ 1.800003] calling sysctl_init+0x0/0x48 @ 1
> [ 1.803339] initcall sysctl_init+0x0/0x48 returned 0 after 0 usecs
> [ 1.806672] calling print_all_ICs+0x0/0x556 @ 1
> [ 1.810010] initcall print_all_ICs+0x0/0x556 returned 0 after 0 usecs
> [ 1.813336] calling hpet_late_init+0x0/0xdc @ 1
> [ 1.816670] initcall hpet_late_init+0x0/0xdc returned -19 after 0 usecs
> [ 1.820004] calling clocksource_done_booting+0x0/0x38 @ 1
> [ 1.823340] Switching to clocksource jiffies
> [ 1.826672] initcall clocksource_done_booting+0x0/0x38 returned 0 after 3255 usecs
> [ 1.830003] calling ftrace_init_debugfs+0x0/0x1eb @ 1
> [ 1.833519] initcall ftrace_init_debugfs+0x0/0x1eb returned 0 after 0 usecs
> [ 1.836670] calling rb_init_debugfs+0x0/0x2f @ 1
> [ 1.840047] initcall rb_init_debugfs+0x0/0x2f returned 0 after 0 usecs
> [ 1.843337] calling tracer_init_debugfs+0x0/0x340 @ 1
> [ 1.850548] initcall tracer_init_debugfs+0x0/0x340 returned 0 after 3255 usecs
> [ 1.853337] calling init_trace_printk_function_export+0x0/0x2f @ 1
> [ 1.856684] initcall init_trace_printk_function_export+0x0/0x2f returned 0 after 0 usecs
> [ 1.860003] calling stat_workqueue_init+0x0/0x2b @ 1
> [ 1.863356] initcall stat_workqueue_init+0x0/0x2b returned 0 after 0 usecs
> [ 1.866670] calling event_trace_init+0x0/0x4a0 @ 1
> [ 1.942723] initcall event_trace_init+0x0/0x4a0 returned 0 after 68359 usecs
> [ 1.943339] calling init_pipe_fs+0x0/0x4c @ 1
> [ 1.946821] initcall init_pipe_fs+0x0/0x4c returned 0 after 0 usecs
> [ 1.950003] calling eventpoll_init+0x0/0xe3 @ 1
> [ 1.953483] initcall eventpoll_init+0x0/0xe3 returned 0 after 0 usecs
> [ 1.956669] calling anon_inode_init+0x0/0x128 @ 1
> [ 1.963482] initcall anon_inode_init+0x0/0x128 returned 0 after 3255 usecs
> [ 1.966670] calling fscache_init+0x0/0xaf @ 1
> [ 1.970014] Slow work thread pool: Starting up
> [ 1.973521] Slow work thread pool: Ready
> [ 1.976779] FS-Cache: Loaded
> [ 1.979658] initcall fscache_init+0x0/0xaf returned 0 after 6510 usecs
> [ 1.980004] calling cachefiles_init+0x0/0xa4 @ 1
> [ 1.983515] CacheFiles: Loaded
> [ 1.986671] initcall cachefiles_init+0x0/0xa4 returned 0 after 3255 usecs
> [ 1.990003] calling tomoyo_initerface_init+0x0/0x11c @ 1
> [ 1.996811] initcall tomoyo_initerface_init+0x0/0x11c returned 0 after 3255 usecs
> [ 2.000003] calling blk_scsi_ioctl_init+0x0/0x289 @ 1
> [ 2.003336] initcall blk_scsi_ioctl_init+0x0/0x289 returned 0 after 0 usecs
> [ 2.006670] calling chr_dev_init+0x0/0xc3 @ 1
> [ 2.010991] initcall chr_dev_init+0x0/0xc3 returned 0 after 0 usecs
> [ 2.013338] calling firmware_class_init+0x0/0x79 @ 1
> [ 2.016739] initcall firmware_class_init+0x0/0x79 returned 0 after 0 usecs
> [ 2.020004] calling ieee1394_init+0x0/0x260 @ 1
> [ 2.023833] initcall ieee1394_init+0x0/0x260 returned 0 after 0 usecs
> [ 2.026672] calling cpufreq_gov_performance_init+0x0/0x12 @ 1
> [ 2.030017] initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 0 usecs
> [ 2.033336] calling cpufreq_gov_userspace_init+0x0/0x12 @ 1
> [ 2.036671] initcall cpufreq_gov_userspace_init+0x0/0x12 returned 0 after 0 usecs
> [ 2.040003] calling ssb_modinit+0x0/0x49 @ 1
> [ 2.043439] initcall ssb_modinit+0x0/0x49 returned 0 after 0 usecs
> [ 2.046670] calling pcibios_assign_resources+0x0/0x74 @ 1
> [ 2.050204] pci 0000:00:09.0: PCI bridge, secondary bus 0000:05
> [ 2.053337] pci 0000:00:09.0: IO window: 0xc000-0xcfff
> [ 2.056673] pci 0000:00:09.0: MEM window: 0xda000000-0xda0fffff
> [ 2.060004] pci 0000:00:09.0: PREFETCH window: disabled
> [ 2.063338] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:04
> [ 2.066668] pci 0000:00:0b.0: IO window: disabled
> [ 2.070005] pci 0000:00:0b.0: MEM window: disabled
> [ 2.076669] pci 0000:00:0b.0: PREFETCH window: disabled
> [ 2.080005] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03
> [ 2.083334] pci 0000:00:0c.0: IO window: disabled
> [ 2.086672] pci 0000:00:0c.0: MEM window: disabled
> [ 2.090004] pci 0000:00:0c.0: PREFETCH window: disabled
> [ 2.093338] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:02
> [ 2.096668] pci 0000:00:0d.0: IO window: disabled
> [ 2.100006] pci 0000:00:0d.0: MEM window: disabled
> [ 2.103337] pci 0000:00:0d.0: PREFETCH window: disabled
> [ 2.106678] pci 0000:01:00.0: BAR 6: got res [0xd8000000-0xd801ffff] bus [0xd8000000-0xd801ffff] flags 0x27200
> [ 2.110005] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:01
> [ 2.113337] pci 0000:00:0e.0: IO window: 0xb000-0xbfff
> [ 2.116673] pci 0000:00:0e.0: MEM window: 0xd8000000-0xd9ffffff
> [ 2.120005] pci 0000:00:0e.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff
> [ 2.123351] pci 0000:00:09.0: setting latency timer to 64
> [ 2.126681] pci 0000:00:0b.0: setting latency timer to 64
> [ 2.130014] pci 0000:00:0c.0: setting latency timer to 64
> [ 2.133347] pci 0000:00:0d.0: setting latency timer to 64
> [ 2.136680] pci 0000:00:0e.0: setting latency timer to 64
> [ 2.140004] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
> [ 2.143335] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
> [ 2.146669] pci_bus 0000:05: resource 0 io: [0xc000-0xcfff]
> [ 2.150002] pci_bus 0000:05: resource 1 mem: [0xda000000-0xda0fffff]
> [ 2.153335] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
> [ 2.156671] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
> [ 2.160002] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
> [ 2.163335] pci_bus 0000:01: resource 1 mem: [0xd8000000-0xd9ffffff]
> [ 2.166668] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd7ffffff]
> [ 2.170003] initcall pcibios_assign_resources+0x0/0x74 returned 0 after 117187 usecs
> [ 2.173336] calling sysctl_core_init+0x0/0x38 @ 1
> [ 2.176694] initcall sysctl_core_init+0x0/0x38 returned 0 after 0 usecs
> [ 2.180003] calling inet_init+0x0/0x209 @ 1
> [ 2.183625] NET: Registered protocol family 2
> [ 2.187000] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
> [ 2.190464] IPv4 FIB: Using LC-trie version 0.409
> [ 2.197124] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
> [ 2.203376] TCP bind hash table entries: 65536 (order: 10, 4718592 bytes)
> [ 2.215136] TCP: Hash tables configured (established 131072 bind 65536)
> [ 2.216713] TCP reno registered
> [ 2.220429] initcall inet_init+0x0/0x209 returned 0 after 35807 usecs
> [ 2.223337] calling af_unix_init+0x0/0x55 @ 1
> [ 2.226759] NET: Registered protocol family 1
> [ 2.230033] initcall af_unix_init+0x0/0x55 returned 0 after 3255 usecs
> [ 2.233336] calling init_sunrpc+0x0/0x5d @ 1
> [ 2.237131] RPC: Registered udp transport module.
> [ 2.240004] RPC: Registered tcp transport module.
> [ 2.243335] RPC: Registered tcp NFSv4.1 backchannel transport module.
> [ 2.246674] initcall init_sunrpc+0x0/0x5d returned 0 after 9765 usecs
> [ 2.250003] calling pci_apply_final_quirks+0x0/0x35 @ 1
> [ 2.253351] pci 0000:00:00.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x12
> [ 2.256706] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x20
> [ 2.260004] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x5be
> [ 2.263337] pci 0000:00:00.0: calling pci_fixup_video+0x0/0xbd
> [ 2.266677] pci 0000:00:01.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x12
> [ 2.270005] pci 0000:00:01.0: calling quirk_cardbus_legacy+0x0/0x20
> [ 2.273336] pci 0000:00:01.0: calling quirk_usb_early_handoff+0x0/0x5be
> [ 2.276669] pci 0000:00:01.0: calling pci_fixup_video+0x0/0xbd
> [ 2.280010] pci 0000:00:01.1: calling nv_msi_ht_cap_quirk_leaf+0x0/0x12
> [ 2.283343] pci 0000:00:01.1: calling quirk_cardbus_legacy+0x0/0x20
> [ 2.286669] pci 0000:00:01.1: calling quirk_usb_early_handoff+0x0/0x5be
> [ 2.290002] pci 0000:00:01.1: calling pci_fixup_video+0x0/0xbd
> [ 2.293343] pci 0000:00:02.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x12
> [ 2.296677] pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x20
> [ 2.300002] pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0x5be
> [ 2.316703] pci 0000:00:02.0: calling pci_fixup_video+0x0/0xbd
> [ 2.320011] pci 0000:00:02.1: calling nv_msi_ht_cap_quirk_leaf+0x0/0x12
> [ 2.323402] pci 0000:00:02.1: calling quirk_cardbus_legacy+0x0/0x20
> [ 2.326669] pci 0000:00:02.1: calling quirk_usb_early_handoff+0x0/0x5be
> [ 2.330027] pci 0000:00:02.1: calling pci_fixup_video+0x0/0xbd
> [ 2.333344] pci 0000:00:04.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x12
> [ 2.336677] pci 0000:00:04.0: calling quirk_cardbus_legacy+0x0/0x20
> [ 2.340003] pci 0000:00:04.0: calling quirk_usb_early_handoff+0x0/0x5be
> [ 2.343336] pci 0000:00:04.0: calling pci_fixup_video+0x0/0xbd
> [ 2.346677] pci 0000:00:06.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x12
> [ 2.350010] pci 0000:00:06.0: calling quirk_cardbus_legacy+0x0/0x20
> [ 2.353336] pci 0000:00:06.0: calling quirk_usb_early_handoff+0x0/0x5be
> [ 2.356669] pci 0000:00:06.0: calling pci_fixup_video+0x0/0xbd
> [ 2.360010] pci 0000:00:09.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x12
> [ 2.363338] pci 0000:00:09.0: calling quirk_cardbus_legacy+0x0/0x20
> [ 2.366669] pci 0000:00:09.0: calling quirk_usb_early_handoff+0x0/0x5be
> [ 2.370003] pci 0000:00:09.0: calling pci_fixup_video+0x0/0xbd
> [ 2.373343] pci 0000:00:0a.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x12
> [ 2.376677] pci 0000:00:0a.0: calling quirk_cardbus_legacy+0x0/0x20
> [ 2.380002] pci 0000:00:0a.0: calling quirk_usb_early_handoff+0x0/0x5be
> [ 2.383336] pci 0000:00:0a.0: calling pci_fixup_video+0x0/0xbd
> [ 2.386677] pci 0000:00:0b.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x12
> [ 2.390130] pci 0000:00:00.0: Found enabled HT MSI Mapping
> [ 2.393337] pci 0000:00:0b.0: calling quirk_nvidia_ck804_msi_ht_cap+0x0/0x8a
> [ 2.396684] pci 0000:00:0b.0: Found disabled HT MSI Mapping
> [ 2.400016] pci 0000:00:00.0: Found enabled HT MSI Mapping
> [ 2.403337] pci 0000:00:0b.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0x70
> [ 2.406671] pci 0000:00:0b.0: calling quirk_cardbus_legacy+0x0/0x20
> [ 2.410002] pci 0000:00:0b.0: calling quirk_usb_early_handoff+0x0/0x5be
> [ 2.413338] pci 0000:00:0b.0: calling pci_fixup_video+0x0/0xbd
> [ 2.416677] pci 0000:00:0c.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x12
> [ 2.420145] pci 0000:00:00.0: Found enabled HT MSI Mapping
> [ 2.423336] pci 0000:00:0c.0: calling quirk_nvidia_ck804_msi_ht_cap+0x0/0x8a
> [ 2.426684] pci 0000:00:0c.0: Found disabled HT MSI Mapping
> [ 2.430016] pci 0000:00:00.0: Found enabled HT MSI Mapping
> [ 2.433337] pci 0000:00:0c.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0x70
> [ 2.436670] pci 0000:00:0c.0: calling quirk_cardbus_legacy+0x0/0x20
> [ 2.440002] pci 0000:00:0c.0: calling quirk_usb_early_handoff+0x0/0x5be
> [ 2.443336] pci 0000:00:0c.0: calling pci_fixup_video+0x0/0xbd
> [ 2.446677] pci 0000:00:0d.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x12
> [ 2.450164] pci 0000:00:00.0: Found enabled HT MSI Mapping
> [ 2.453336] pci 0000:00:0d.0: calling quirk_nvidia_ck804_msi_ht_cap+0x0/0x8a
> [ 2.456684] pci 0000:00:0d.0: Found disabled HT MSI Mapping
> [ 2.460016] pci 0000:00:00.0: Found enabled HT MSI Mapping
> [ 2.463336] pci 0000:00:0d.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0x70
> [ 2.466670] pci 0000:00:0d.0: calling quirk_cardbus_legacy+0x0/0x20
> [ 2.470002] pci 0000:00:0d.0: calling quirk_usb_early_handoff+0x0/0x5be
> [ 2.473336] pci 0000:00:0d.0: calling pci_fixup_video+0x0/0xbd
> [ 2.476677] pci 0000:00:0e.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x12
> [ 2.480183] pci 0000:00:00.0: Found enabled HT MSI Mapping
> [ 2.483336] pci 0000:00:0e.0: calling quirk_nvidia_ck804_msi_ht_cap+0x0/0x8a
> [ 2.486684] pci 0000:00:0e.0: Found disabled HT MSI Mapping
> [ 2.490016] pci 0000:00:00.0: Found enabled HT MSI Mapping
> [ 2.493336] pci 0000:00:0e.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0x70
> [ 2.496670] pci 0000:00:0e.0: calling quirk_cardbus_legacy+0x0/0x20
> [ 2.500002] pci 0000:00:0e.0: calling quirk_usb_early_handoff+0x0/0x5be
> [ 2.503336] pci 0000:00:0e.0: calling pci_fixup_video+0x0/0xbd
> [ 2.506678] pci 0000:00:18.0: calling quirk_amd_nb_node+0x0/0x56
> [ 2.510008] pci 0000:00:18.0: calling quirk_cardbus_legacy+0x0/0x20
> [ 2.513336] pci 0000:00:18.0: calling quirk_usb_early_handoff+0x0/0x5be
> [ 2.516669] pci 0000:00:18.0: calling pci_fixup_video+0x0/0xbd
> [ 2.520009] pci 0000:00:18.1: calling quirk_amd_nb_node+0x0/0x56
> [ 2.523341] pci 0000:00:18.1: calling quirk_cardbus_legacy+0x0/0x20
> [ 2.526669] pci 0000:00:18.1: calling quirk_usb_early_handoff+0x0/0x5be
> [ 2.530002] pci 0000:00:18.1: calling pci_fixup_video+0x0/0xbd
> [ 2.533343] pci 0000:00:18.2: calling quirk_amd_nb_node+0x0/0x56
> [ 2.536674] pci 0000:00:18.2: calling quirk_cardbus_legacy+0x0/0x20
> [ 2.540002] pci 0000:00:18.2: calling quirk_usb_early_handoff+0x0/0x5be
> [ 2.543335] pci 0000:00:18.2: calling pci_fixup_video+0x0/0xbd
> [ 2.546676] pci 0000:00:18.3: calling quirk_amd_nb_node+0x0/0x56
> [ 2.550007] pci 0000:00:18.3: calling quirk_cardbus_legacy+0x0/0x20
> [ 2.553335] pci 0000:00:18.3: calling quirk_usb_early_handoff+0x0/0x5be
> [ 2.556669] pci 0000:00:18.3: calling pci_fixup_video+0x0/0xbd
> [ 2.560010] pci 0000:05:07.0: calling quirk_cardbus_legacy+0x0/0x20
> [ 2.563336] pci 0000:05:07.0: calling quirk_usb_early_handoff+0x0/0x5be
> [ 2.566669] pci 0000:05:07.0: calling pci_fixup_video+0x0/0xbd
> [ 2.570010] pci 0000:01:00.0: calling quirk_cardbus_legacy+0x0/0x20
> [ 2.573335] pci 0000:01:00.0: calling quirk_usb_early_handoff+0x0/0x5be
> [ 2.576669] pci 0000:01:00.0: calling pci_fixup_video+0x0/0xbd
> [ 2.580005] pci 0000:01:00.0: Boot video device
> [ 2.583344] pci 0000:01:00.1: calling quirk_cardbus_legacy+0x0/0x20
> [ 2.586669] pci 0000:01:00.1: calling quirk_usb_early_handoff+0x0/0x5be
> [ 2.590002] pci 0000:01:00.1: calling pci_fixup_video+0x0/0xbd
> [ 2.593342] initcall pci_apply_final_quirks+0x0/0x35 returned 0 after 332030 usecs
> [ 2.596669] calling populate_rootfs+0x0/0xd7 @ 1
> [ 2.600890] initcall populate_rootfs+0x0/0xd7 returned 0 after 0 usecs
> [ 2.603336] calling pci_iommu_init+0x0/0x12 @ 1
> [ 2.606935] initcall pci_iommu_init+0x0/0x12 returned 0 after 0 usecs
> [ 2.610001] calling i8259A_init_sysfs+0x0/0x22 @ 1
> [ 2.613594] initcall i8259A_init_sysfs+0x0/0x22 returned 0 after 0 usecs
> [ 2.616668] calling vsyscall_init+0x0/0x60 @ 1
> [ 2.620014] initcall vsyscall_init+0x0/0x60 returned 0 after 0 usecs
> [ 2.623334] calling sbf_init+0x0/0xe9 @ 1
> [ 2.626709] initcall sbf_init+0x0/0xe9 returned 0 after 0 usecs
> [ 2.630001] calling i8237A_init_sysfs+0x0/0x22 @ 1
> [ 2.633452] initcall i8237A_init_sysfs+0x0/0x22 returned 0 after 0 usecs
> [ 2.636668] calling add_rtc_cmos+0x0/0x42 @ 1
> [ 2.640157] platform rtc_cmos: registered platform RTC device (no PNP device found)
> [ 2.643336] initcall add_rtc_cmos+0x0/0x42 returned 0 after 3255 usecs
> [ 2.646669] calling cache_sysfs_init+0x0/0x2ef @ 1
> [ 2.650002] initcall cache_sysfs_init+0x0/0x2ef returned 0 after 0 usecs
> [ 2.653374] calling mce_init_device+0x0/0x2c9 @ 1
> [ 2.656668] initcall mce_init_device+0x0/0x2c9 returned -5 after 0 usecs
> [ 2.660002] initcall mce_init_device+0x0/0x2c9 returned with error code -5
> [ 2.663335] calling threshold_init_device+0x0/0x82 @ 1
> [ 2.666709] initcall threshold_init_device+0x0/0x82 returned 0 after 0 usecs
> [ 2.670006] calling inject_init+0x0/0x32 @ 1
> [ 2.673334] Machine check injector initialized
> [ 2.676672] initcall inject_init+0x0/0x32 returned 0 after 3255 usecs
> [ 2.680041] calling msr_init+0x0/0x12e @ 1
> [ 2.683631] initcall msr_init+0x0/0x12e returned 0 after 0 usecs
> [ 2.686669] calling cpuid_init+0x0/0x12e @ 1
> [ 2.690296] initcall cpuid_init+0x0/0x12e returned 0 after 0 usecs
> [ 2.693377] calling ioapic_init_sysfs+0x0/0xb3 @ 1
> [ 2.696788] initcall ioapic_init_sysfs+0x0/0xb3 returned 0 after 0 usecs
> [ 2.700001] calling add_pcspkr+0x0/0x28 @ 1
> [ 2.703438] initcall add_pcspkr+0x0/0x28 returned 0 after 0 usecs
> [ 2.706708] calling microcode_init+0x0/0x10a @ 1
> [ 2.710000] microcode: no support for this CPU vendor
> [ 2.713334] initcall microcode_init+0x0/0x10a returned -19 after 3255 usecs
> [ 2.716669] calling start_periodic_check_for_corruption+0x0/0x3c @ 1
> [ 2.720041] initcall start_periodic_check_for_corruption+0x0/0x3c returned 0 after 0 usecs
> [ 2.723334] calling audit_classes_init+0x0/0xaf @ 1
> [ 2.726692] initcall audit_classes_init+0x0/0xaf returned 0 after 0 usecs
> [ 2.730002] calling start_pageattr_test+0x0/0x47 @ 1
> [ 2.736886] initcall start_pageattr_test+0x0/0x47 returned 0 after 0 usecs
> [ 2.740062] calling pt_dump_init+0x0/0x30 @ 1
> [ 2.743356] initcall pt_dump_init+0x0/0x30 returned 0 after 0 usecs
> [ 2.746668] calling crypto_fpu_module_init+0x0/0x12 @ 1
> [ 2.753388] initcall crypto_fpu_module_init+0x0/0x12 returned 0 after 3255 usecs
> [ 2.756668] calling aes_init+0x0/0x12 @ 1
> [ 2.760167] initcall aes_init+0x0/0x12 returned 0 after 0 usecs
> [ 2.762220] cryptomgr_test used greatest stack depth: 6168 bytes left
> [ 2.763343] calling init+0x0/0x12 @ 1
> [ 2.766742] initcall init+0x0/0x12 returned 0 after 0 usecs
> [ 2.770004] calling aesni_init+0x0/0x164 @ 1
> [ 2.773333] Intel AES-NI instructions are not detected.
> [ 2.776668] initcall aesni_init+0x0/0x164 returned -19 after 3255 usecs
> [ 2.780000] calling crc32c_intel_mod_init+0x0/0x20 @ 1
> [ 2.783381] initcall crc32c_intel_mod_init+0x0/0x20 returned -19 after 0 usecs
> [ 2.786667] calling init_vdso_vars+0x0/0x207 @ 1
> [ 2.790016] initcall init_vdso_vars+0x0/0x207 returned 0 after 0 usecs
> [ 2.793334] calling ia32_binfmt_init+0x0/0x14 @ 1
> [ 2.796712] initcall ia32_binfmt_init+0x0/0x14 returned 0 after 0 usecs
> [ 2.800001] calling sysenter_setup+0x0/0x2d0 @ 1
> [ 2.803340] initcall sysenter_setup+0x0/0x2d0 returned 0 after 0 usecs
> [ 2.806667] calling init_aout_binfmt+0x0/0x14 @ 1
> [ 2.810042] initcall init_aout_binfmt+0x0/0x14 returned 0 after 0 usecs
> [ 2.813334] calling init_sched_debug_procfs+0x0/0x2c @ 1
> [ 2.816684] initcall init_sched_debug_procfs+0x0/0x2c returned 0 after 0 usecs
> [ 2.820000] calling proc_schedstat_init+0x0/0x22 @ 1
> [ 2.823385] initcall proc_schedstat_init+0x0/0x22 returned 0 after 0 usecs
> [ 2.826667] calling proc_execdomains_init+0x0/0x22 @ 1
> [ 2.830020] initcall proc_execdomains_init+0x0/0x22 returned 0 after 0 usecs
> [ 2.833334] calling ioresources_init+0x0/0x3c @ 1
> [ 2.836728] initcall ioresources_init+0x0/0x3c returned 0 after 0 usecs
> [ 2.840001] calling uid_cache_init+0x0/0x8c @ 1
> [ 2.843396] initcall uid_cache_init+0x0/0x8c returned 0 after 0 usecs
> [ 2.846668] calling init_posix_timers+0x0/0x17a @ 1
> [ 2.850090] initcall init_posix_timers+0x0/0x17a returned 0 after 0 usecs
> [ 2.853334] calling init_posix_cpu_timers+0x0/0xe5 @ 1
> [ 2.856668] initcall init_posix_cpu_timers+0x0/0xe5 returned 0 after 0 usecs
> [ 2.860000] calling nsproxy_cache_init+0x0/0x2d @ 1
> [ 2.863459] initcall nsproxy_cache_init+0x0/0x2d returned 0 after 0 usecs
> [ 2.866668] calling create_proc_profile+0x0/0x24f @ 1
> [ 2.870001] initcall create_proc_profile+0x0/0x24f returned 0 after 0 usecs
> [ 2.873334] calling timekeeping_init_device+0x0/0x22 @ 1
> [ 2.876844] initcall timekeeping_init_device+0x0/0x22 returned 0 after 0 usecs
> [ 2.880001] calling init_clocksource_sysfs+0x0/0x50 @ 1
> [ 2.883460] initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 0 usecs
> [ 2.886668] calling init_timer_list_procfs+0x0/0x2c @ 1
> [ 2.890053] initcall init_timer_list_procfs+0x0/0x2c returned 0 after 0 usecs
> [ 2.893334] calling init_tstats_procfs+0x0/0x2c @ 1
> [ 2.896678] initcall init_tstats_procfs+0x0/0x2c returned 0 after 0 usecs
> [ 2.900001] calling lockdep_proc_init+0x0/0x7c @ 1
> [ 2.903416] initcall lockdep_proc_init+0x0/0x7c returned 0 after 0 usecs
> [ 2.906667] calling futex_init+0x0/0x80 @ 1
> [ 2.910044] initcall futex_init+0x0/0x80 returned 0 after 0 usecs
> [ 2.913334] calling proc_dma_init+0x0/0x22 @ 1
> [ 2.916719] initcall proc_dma_init+0x0/0x22 returned 0 after 0 usecs
> [ 2.920001] calling kallsyms_init+0x0/0x25 @ 1
> [ 2.923345] initcall kallsyms_init+0x0/0x25 returned 0 after 0 usecs
> [ 2.926670] calling crash_save_vmcoreinfo_init+0x0/0x46d @ 1
> [ 2.930067] initcall crash_save_vmcoreinfo_init+0x0/0x46d returned 0 after 0 usecs
> [ 2.933334] calling crash_notes_memory_init+0x0/0x37 @ 1
> [ 2.936675] initcall crash_notes_memory_init+0x0/0x37 returned 0 after 0 usecs
> [ 2.940001] calling backtrace_regression_test+0x0/0x105 @ 1
> [ 2.943372] ====[ backtrace testing ]===========
> [ 2.946665] Testing a backtrace from process context.
> [ 2.949999] The following trace is a kernel self test and not a bug!
> [ 2.953334] Pid: 1, comm: swapper Not tainted 2.6.32-dirty #116
> [ 2.956705] Call Trace:
> [ 2.960002] [<ffffffff81087b1f>] ? backtrace_regression_test+0x0/0x105
> [ 2.963335] [<ffffffff81087b5c>] backtrace_regression_test+0x3d/0x105
> [ 2.966669] [<ffffffff81a0f1d2>] ? printk+0x41/0x43
> [ 2.970041] [<ffffffff810736a6>] ? timekeeping_get_ns+0x1b/0x3d
> [ 2.973334] [<ffffffff81073ee5>] ? ktime_get+0x5e/0x98
> [ 2.976668] [<ffffffff81087b1f>] ? backtrace_regression_test+0x0/0x105
> [ 2.980001] [<ffffffff81087b1f>] ? backtrace_regression_test+0x0/0x105
> [ 2.983376] [<ffffffff8100907d>] do_one_initcall+0x72/0x17f
> [ 2.986670] [<ffffffff8247f66c>] kernel_init+0x15f/0x1b5
> [ 2.990002] [<ffffffff8100cd9a>] child_rip+0xa/0x20
> [ 2.993336] [<ffffffff81040ab9>] ? finish_task_switch+0x74/0xab
> [ 2.996708] [<ffffffff8100c700>] ? restore_args+0x0/0x30
> [ 3.000001] [<ffffffff8247f50d>] ? kernel_init+0x0/0x1b5
> [ 3.003334] [<ffffffff8100cd90>] ? child_rip+0x0/0x20
> [ 3.006666] Testing a backtrace from irq context.
> [ 3.010038] The following trace is a kernel self test and not a bug!
> [ 3.013353] Pid: 4, comm: ksoftirqd/0 Not tainted 2.6.32-dirty #116
> [ 3.016663] Call Trace:
> [ 3.019996] <IRQ> [<ffffffff8107caa6>] ? trace_hardirqs_on_caller+0xfa/0x13f
> [ 3.026666] [<ffffffff81087b11>] backtrace_test_irq_callback+0xe/0x1c
> [ 3.030000] [<ffffffff81052862>] tasklet_action+0x7e/0xdc
> [ 3.033332] [<ffffffff81053d95>] __do_softirq+0x10f/0x1ea
> [ 3.036665] [<ffffffff8100ce9c>] call_softirq+0x1c/0x28
> [ 3.039996] <EOI> [<ffffffff8100ea59>] do_softirq+0x3d/0x88
> [ 3.046665] [<ffffffff810539a5>] ksoftirqd+0x9d/0x181
> [ 3.049998] [<ffffffff81053908>] ? ksoftirqd+0x0/0x181
> [ 3.053334] [<ffffffff8106b58e>] kthread+0x7f/0x87
> [ 3.056665] [<ffffffff8100cd9a>] child_rip+0xa/0x20
> [ 3.059998] [<ffffffff81040ab9>] ? finish_task_switch+0x74/0xab
> [ 3.063331] [<ffffffff8100c700>] ? restore_args+0x0/0x30
> [ 3.066665] [<ffffffff8106b50f>] ? kthread+0x0/0x87
> [ 3.069998] [<ffffffff8100cd90>] ? child_rip+0x0/0x20
> [ 3.073356] Testing a saved backtrace.
> [ 3.076666] The following trace is a kernel self test and not a bug!
> [ 3.080000] [<ffffffff81016e82>] save_stack_trace+0x2f/0x4c
> [ 3.086711] [<ffffffff81087c01>] backtrace_regression_test+0xe2/0x105
> [ 3.093332] [<ffffffff8100907d>] do_one_initcall+0x72/0x17f
> [ 3.100038] [<ffffffff8247f66c>] kernel_init+0x15f/0x1b5
> [ 3.103332] [<ffffffff8100cd9a>] child_rip+0xa/0x20
> [ 3.106665] [<ffffffffffffffff>] 0xffffffffffffffff
> [ 3.109999] ====[ end of backtrace testing ]====
> [ 3.113373] initcall backtrace_regression_test+0x0/0x105 returned 0 after 166015 usecs
> [ 3.116667] calling audit_init+0x0/0x153 @ 1
> [ 3.119999] audit: initializing netlink socket (disabled)
> [ 3.123398] type=2000 audit(1268788196.123:1): initialized
> [ 3.126720] initcall audit_init+0x0/0x153 returned 0 after 6510 usecs
> [ 3.130001] calling audit_tree_init+0x0/0x49 @ 1
> [ 3.133338] initcall audit_tree_init+0x0/0x49 returned 0 after 0 usecs
> [ 3.136667] calling hung_task_init+0x0/0x53 @ 1
> [ 3.140105] initcall hung_task_init+0x0/0x53 returned 0 after 0 usecs
> [ 3.143336] calling rcu_torture_init+0x0/0x6b5 @ 1
> [ 3.146684] rcu-torture:--- Start of test: nreaders=4 nfakewriters=4 stat_interval=0 verbose=0 test_no_idle_hz=0 shuffle_interval=3 stutter=5 irqreader=1
> [ 3.150112] initcall rcu_torture_init+0x0/0x6b5 returned 0 after 3255 usecs
> [ 3.153367] calling utsname_sysctl_init+0x0/0x14 @ 1
> [ 3.156683] initcall utsname_sysctl_init+0x0/0x14 returned 0 after 0 usecs
> [ 3.160001] calling ftrace_mod_cmd_init+0x0/0x12 @ 1
> [ 3.163350] initcall ftrace_mod_cmd_init+0x0/0x12 returned 0 after 0 usecs
> [ 3.166711] calling init_events+0x0/0x64 @ 1
> [ 3.170030] initcall init_events+0x0/0x64 returned 0 after 0 usecs
> [ 3.173335] calling init_sched_switch_trace+0x0/0x12 @ 1
> [ 3.190032] Testing tracer sched_switch: PASSED
> [ 3.327396] initcall init_sched_switch_trace+0x0/0x12 returned 0 after 143228 usecs
> [ 3.330001] calling init_stack_trace+0x0/0x12 @ 1
> [ 3.343341] Testing tracer sysprof: .. no entries found ..FAILED!
> [ 3.459513] initcall init_stack_trace+0x0/0x12 returned -1 after 120442 usecs
> [ 3.460001] initcall init_stack_trace+0x0/0x12 returned with error code -1
> [ 3.463333] calling init_function_trace+0x0/0x3e @ 1
> [ 3.476680] Testing tracer function:
> [ 3.493420] BUG: unable to handle kernel NULL pointer dereference at 0000000000000789
> [ 3.496660] IP: [<ffffffff81044c94>] push_rt_task+0x16/0x1ea
> [ 3.496660] PGD 0
> [ 3.496660] Oops: 0000 [#1] PREEMPT SMP
> [ 3.500321] last sysfs file:
> [ 3.500321] CPU 1
> [ 3.500321] Pid: 36, comm: rcu_torture_fak Not tainted 2.6.32-dirty #116
> [ 3.500321] RIP: 0010:[<ffffffff81044c94>] [<ffffffff81044c94>] push_rt_task+0x16/0x1ea
> [ 3.500321] RSP: 0018:ffff88003cf6bda0 EFLAGS: 00010286
> [ 3.500321] RAX: 00000000ffffffff RBX: 0000000000000001 RCX: 0000000000000001
> [ 3.500321] RDX: 000000000000000a RSI: ffffffff8139782f RDI: 0000000000000001
> [ 3.500321] RBP: ffff88003cf6bde0 R08: 0000000000000000 R09: ffff88003cf6bd20
> [ 3.500321] R10: 0000000000000000 R11: 0000000000000000 R12: 00000000000e3b75
> [ 3.500321] R13: 0000000000000001 R14: ffff88003cf6bfd8 R15: 00000000933c6a63
> [ 3.500321] FS: 0000000000000000(0000) GS:ffff880009800000(0000) knlGS:0000000000000000
> [ 3.500321] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> [ 3.500321] CR2: 0000000000000789 CR3: 0000000001001000 CR4: 00000000000006a0
> [ 3.500321] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [ 3.500321] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> [ 3.500321] Process rcu_torture_fak (pid: 36, threadinfo ffff88003cf6a000, task ffff88003cf0d900)
> [ 3.600086] .. no entries found ..FAILED!
> [ 3.600100] initcall init_function_trace+0x0/0x3e returned -1 after 130208 usecs
> [ 3.600106] initcall init_function_trace+0x0/0x3e returned with error code -1
> [ 3.600112] calling init_irqsoff_tracer+0x0/0x14 @ 1
> [ 3.500321] Stack:
> [ 3.500321] ffffffff8105bd68 ffff88003cf6bde0 00000000fffea488 0000000000000001
> [ 3.500321] <0> 00000000000e3b75 0000000000000001 ffff88003cf6bfd8 00000000933c6a63
> [ 3.500321] <0> ffff88003cf6be10 ffffffff81044f33 ffff88003cf6be10 ffffffff81040afe
> [ 3.500321] Call Trace:
> [ 3.500321] [<ffffffff8105bd68>] ? del_timer_sync+0x0/0x8b
> [ 3.500321] [<ffffffff81044f33>] post_schedule_rt+0x19/0x22
> [ 3.500321] [<ffffffff81040afe>] ? sub_preempt_count+0xe/0x4d
> [ 3.500321] [<ffffffff813978fc>] delay_tsc+0x5f/0xd3
> [ 3.500321] [<ffffffff8109c8ce>] ? rcu_torture_fakewriter+0x0/0xf7
> [ 3.500321] [<ffffffff8139782f>] __delay+0xf/0x11
> [ 3.500321] [<ffffffff81397870>] __const_udelay+0x3f/0x41
> [ 3.500321] [<ffffffff81397887>] __udelay+0x15/0x17
> [ 3.500321] [<ffffffff8109c953>] rcu_torture_fakewriter+0x85/0xf7
> [ 3.500321] [<ffffffff8106b58e>] kthread+0x7f/0x87
> [ 3.500321] [<ffffffff8100cd9a>] child_rip+0xa/0x20
> [ 3.500321] [<ffffffff81040ab9>] ? finish_task_switch+0x74/0xab
> [ 3.500321] [<ffffffff8100c700>] ? restore_args+0x0/0x30
> [ 3.500321] [<ffffffff8106b50f>] ? kthread+0x0/0x87
> [ 3.500321] [<ffffffff8100cd90>] ? child_rip+0x0/0x20
> [ 3.500321] Code: 20 83 f8 63 7f 0d 39 87 70 07 00 00 7e 05 e8 fa fd ff ff c9 c3 55 48 89 e5 41 57 41 56 41 55 41 54 53 48 83 ec 18 e8 bc 6d fc ff <83> bf 88 07 00 00 00 49 89 fc 0f 84 96 01 00 00 e8 5a 1b ff ff
Other than the fact that there is a NULL pointer exception, this
stack trace looks normal. :-/
rcu_torture_fakewriter() is as follows:
static int
rcu_torture_fakewriter(void *arg)
{
DEFINE_RCU_RANDOM(rand);
VERBOSE_PRINTK_STRING("rcu_torture_fakewriter task started");
set_user_nice(current, 19);
do {
schedule_timeout_uninterruptible(1 + rcu_random(&rand)%10);
udelay(rcu_random(&rand) & 0x3ff);
cur_ops->sync();
rcu_stutter_wait("rcu_torture_fakewriter");
} while (!kthread_should_stop() && fullstop == FULLSTOP_DONTSTOP);
VERBOSE_PRINTK_STRING("rcu_torture_fakewriter task stopping");
rcutorture_shutdown_absorb("rcu_torture_fakewriter");
while (!kthread_should_stop())
schedule_timeout_uninterruptible(1);
return 0;
}
And we are in the udelay().
> [ 3.500321] RIP [<ffffffff81044c94>] push_rt_task+0x16/0x1ea
> [ 3.500321] RSP <ffff88003cf6bda0>
> [ 3.500321] CR2: 0000000000000789
> [ 3.770017] ---[ end trace 5a5d197966b56a2e ]---
> [ 3.773984] Kernel panic - not syncing: Fatal exception
> [ 3.779998] Pid: 36, comm: rcu_torture_fak Tainted: G D 2.6.32-dirty #116
> [ 3.786663] Call Trace:
> [ 3.789113] [<ffffffff81a0f0d9>] panic+0x84/0x13c
> [ 3.793334] [<ffffffff8100fcc3>] oops_end+0xaf/0xbf
> [ 3.800001] [<ffffffff81029b29>] no_context+0x1f3/0x202
> [ 3.803334] [<ffffffff8107b61c>] ? trace_hardirqs_off+0xd/0xf
> [ 3.810001] [<ffffffff8100ba96>] ? ftrace_call+0x5/0x2b
> [ 3.813333] [<ffffffff81029cbd>] __bad_area_nosemaphore+0x185/0x1a8
> [ 3.820000] [<ffffffff8100ba96>] ? ftrace_call+0x5/0x2b
> [ 3.826667] [<ffffffff81029cf3>] bad_area_nosemaphore+0x13/0x15
> [ 3.833333] [<ffffffff81029f9f>] do_page_fault+0x138/0x284
> [ 3.836668] [<ffffffff81a1292f>] page_fault+0x1f/0x30
> [ 3.843333] [<ffffffff8139782f>] ? __delay+0xf/0x11
> [ 3.846666] [<ffffffff81044c94>] ? push_rt_task+0x16/0x1ea
> [ 3.853333] [<ffffffff8105bd68>] ? del_timer_sync+0x0/0x8b
> [ 3.860000] [<ffffffff81044f33>] post_schedule_rt+0x19/0x22
> [ 3.866666] [<ffffffff81040afe>] ? sub_preempt_count+0xe/0x4d
> [ 3.870000] [<ffffffff813978fc>] delay_tsc+0x5f/0xd3
> [ 3.876667] [<ffffffff8109c8ce>] ? rcu_torture_fakewriter+0x0/0xf7
> [ 3.883333] [<ffffffff8139782f>] __delay+0xf/0x11
> [ 3.886666] [<ffffffff81397870>] __const_udelay+0x3f/0x41
> [ 3.893333] [<ffffffff81397887>] __udelay+0x15/0x17
> [ 3.896667] [<ffffffff8109c953>] rcu_torture_fakewriter+0x85/0xf7
> [ 3.903333] [<ffffffff8106b58e>] kthread+0x7f/0x87
> [ 3.910000] [<ffffffff8100cd9a>] child_rip+0xa/0x20
> [ 3.913333] [<ffffffff81040ab9>] ? finish_task_switch+0x74/0xab
> [ 3.919999] [<ffffffff8100c700>] ? restore_args+0x0/0x30
> [ 3.926667] [<ffffffff8106b50f>] ? kthread+0x0/0x87
> [ 3.929999] [<ffffffff8100cd90>] ? child_rip+0x0/0x20
> [ 3.936671] Rebooting in 1 seconds..Press any key to enter the menu
next prev parent reply other threads:[~2010-03-16 13:30 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-27 22:52 [PATCH tip/core/rcu 0/2] more lockdep-RCU and RCU_FAST_NO_HZ fixes Paul E. McKenney
2010-02-27 22:53 ` [PATCH tip/core/rcu 1/2] rcu: fix holdoff for accelerated GPs for last non-dynticked CPU Paul E. McKenney
2010-02-28 8:59 ` [tip:core/rcu] rcu: Fix " tip-bot for Paul E. McKenney
2010-03-16 11:00 ` Ingo Molnar
2010-03-16 11:03 ` Ingo Molnar
2010-03-16 11:51 ` Ingo Molnar
2010-03-16 12:15 ` Ingo Molnar
2010-03-16 13:30 ` Paul E. McKenney [this message]
2010-03-17 17:53 ` Ingo Molnar
2010-03-17 19:22 ` Paul E. McKenney
2010-03-17 19:35 ` Ingo Molnar
2010-02-27 22:53 ` [PATCH tip/core/rcu 2/2] rcu: make task_subsys_state() RCU-lockdep checks handle boot-time use Paul E. McKenney
2010-02-28 8:59 ` [tip:core/rcu] rcu: Make " tip-bot for Paul E. McKenney
2010-03-01 19:47 ` Paul Menage
2010-02-28 8:55 ` [PATCH tip/core/rcu 0/2] more lockdep-RCU and RCU_FAST_NO_HZ fixes Ingo Molnar
2010-02-28 16:32 ` Paul E. McKenney
2010-03-01 8:33 ` [tip:core/rcu] sched, rcu: Fix rcu_dereference() for RCU-lockdep tip-bot for Paul E. McKenney
2010-03-01 12:10 ` [PATCH tip/core/rcu 0/2] more lockdep-RCU and RCU_FAST_NO_HZ fixes Ingo Molnar
2010-03-01 16:08 ` Paul E. McKenney
2010-03-01 17:58 ` Peter Zijlstra
2010-03-01 18:50 ` Paul E. McKenney
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100316133015.GD6709@linux.vnet.ibm.com \
--to=paulmck@linux.vnet.ibm.com \
--cc=fweisbec@gmail.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=mingo@redhat.com \
--cc=rostedt@goodmis.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.