From: Wolfgang Denk <wd@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 4/7] fdt_support: add partitions fixup in mtd node
Date: Sun, 21 Mar 2010 20:08:52 +0100 [thread overview]
Message-ID: <20100321190852.EEABD4C022@gemini.denx.de> (raw)
In-Reply-To: <1268755808-24931-5-git-send-email-agust@denx.de>
Dear Anatolij Gustschin,
In message <1268755808-24931-5-git-send-email-agust@denx.de> you wrote:
> Allow overriding defined partitions in the device tree blob
> using partition info defined in the 'mtdparts' environment
> variable.
>
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> Cc: Gerald Van Baren <vanbaren@cideas.com>
> ---
> Changes since first version:
> - in fdt_fixup_mtdparts() check the presence of "mtdparts"
> environment variable and don't proceed with initialisation
> if the variable is not defined (suppresses warning while booting).
>
> common/cmd_mtdparts.c | 2 +-
> common/fdt_support.c | 219 +++++++++++++++++++++++++++++++++++++++++++
> include/fdt_support.h | 2 +
> include/jffs2/load_kernel.h | 1 +
> include/mtd_node.h | 11 ++
> 5 files changed, 234 insertions(+), 1 deletions(-)
> create mode 100644 include/mtd_node.h
Applied to "next" branch. Thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
I think there's a world market for about five computers.
-- attr. Thomas J. Watson (Chairman of the Board, IBM), 1943
next prev parent reply other threads:[~2010-03-21 19:08 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-16 16:10 [U-Boot] [PATCH v2 0/7] Add support for PDM360NG board Anatolij Gustschin
2010-03-16 16:10 ` [U-Boot] [PATCH v2 1/7] mpc512x: make MEM IO Control configuration a board config option Anatolij Gustschin
2010-03-16 16:10 ` [U-Boot] [PATCH v2 2/7] mpc512x: add multi serial PSC support Anatolij Gustschin
2010-03-16 16:10 ` [U-Boot] [PATCH v2 3/7] mpc5121: add PSC serial communication routines Anatolij Gustschin
2010-03-16 16:10 ` [U-Boot] [PATCH v2 4/7] fdt_support: add partitions fixup in mtd node Anatolij Gustschin
2010-03-16 16:10 ` [U-Boot] [PATCH v2 5/7] mpc5121: add common post_word_load/store code Anatolij Gustschin
2010-03-16 16:10 ` [U-Boot] [PATCH v2 6/7] mpc5121: add support for PDM360NG board Anatolij Gustschin
2010-03-16 16:10 ` [U-Boot] [PATCH v2 7/7] mpc5121: cpu/mpc512x/diu.c: fix warnings Anatolij Gustschin
2010-03-21 19:24 ` Wolfgang Denk
2010-03-21 19:23 ` [U-Boot] [PATCH v2 6/7] mpc5121: add support for PDM360NG board Wolfgang Denk
2010-04-14 10:39 ` Anatolij Gustschin
2010-04-14 14:21 ` [U-Boot] [PATCH v3 0/3] Add " Anatolij Gustschin
2010-04-14 14:21 ` [U-Boot] [PATCH v3 1/3] mpc5121: determine RAM size using get_ram_size() Anatolij Gustschin
2010-04-14 14:21 ` [U-Boot] [PATCH v3 2/3] mpc5121: add support for PDM360NG board Anatolij Gustschin
2010-04-14 14:21 ` [U-Boot] [PATCH v3 3/3] mpc5121: pdm360ng: add coprocessor POST Anatolij Gustschin
2010-04-14 15:40 ` Wolfgang Denk
2010-04-15 9:18 ` Detlev Zundel
2010-04-15 9:25 ` Anatolij Gustschin
2010-04-15 11:48 ` Wolfgang Denk
2010-04-15 11:46 ` Wolfgang Denk
2010-04-15 10:24 ` Anatolij Gustschin
2010-04-15 11:54 ` Wolfgang Denk
2010-04-14 15:48 ` [U-Boot] [PATCH v3 2/3] mpc5121: add support for PDM360NG board Wolfgang Denk
2010-04-15 12:32 ` Anatolij Gustschin
2010-04-15 12:43 ` Stefan Roese
2010-04-15 15:18 ` Wolfgang Denk
2010-04-14 15:31 ` [U-Boot] [PATCH v3 1/3] mpc5121: determine RAM size using get_ram_size() Wolfgang Denk
2010-04-15 12:20 ` Anatolij Gustschin
2010-03-21 19:09 ` [U-Boot] [PATCH v2 5/7] mpc5121: add common post_word_load/store code Wolfgang Denk
2010-03-21 19:08 ` Wolfgang Denk [this message]
2010-03-21 19:05 ` [U-Boot] [PATCH v2 3/7] mpc5121: add PSC serial communication routines Wolfgang Denk
2010-03-21 19:04 ` [U-Boot] [PATCH v2 2/7] mpc512x: add multi serial PSC support Wolfgang Denk
2010-03-21 19:03 ` [U-Boot] [PATCH v2 1/7] mpc512x: make MEM IO Control configuration a board config option Wolfgang Denk
2010-03-21 19:00 ` [U-Boot] [PATCH v2 0/7] Add support for PDM360NG board Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100321190852.EEABD4C022@gemini.denx.de \
--to=wd@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.