[U-Boot] [PATCH v4] cfi flash: add status polling method for amd flash

[Stefan Roese <sr@denx.de>]

On Wednesday 24 March 2010 03:29:21 Thomas Chou wrote:
> This patch adds status polling method to offer an alternative to
> data toggle method for amd flash chips.
> 
> This patch is needed for nios2 cfi flash interface, where the bus
> controller performs 4 bytes read cycles for a single byte read
> instruction. The data toggle method can not detect chip busy
> status correctly. So we have to poll DQ7, which will be inverted
> when the chip is busy.
> 
> This feature is enabled with the config def,
> CONFIG_SYS_CFI_FLASH_STATUS_POLL
> 
> In flash_erase, the verbose printing of '.' is changed that it will
> go with each sector whether successed or failed.

Applied to u-boot-cfi-flash/next. Thanks.
 
Cheers,
Stefan

--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de