From: Philippe De Muyter <phdm@macqel.be>
To: Larry Finger <Larry.Finger@lwfinger.net>
Cc: linux-wireless@vger.kernel.org
Subject: Re: b43 'hardware blocked' but only keyboard/led touch button
Date: Tue, 30 Mar 2010 09:34:01 +0200 [thread overview]
Message-ID: <20100330073401.GA13675@frolo.macqel> (raw)
In-Reply-To: <4BB1335F.7030306@lwfinger.net>
Hello Larry,
On Mon, Mar 29, 2010 at 06:10:23PM -0500, Larry Finger wrote:
> On 03/29/2010 03:12 PM, Philippe De Muyter wrote:
> > Hello wireless-linux experts,
> >
> > I have installed yesterday the last opensuse 11.3 rc4 on a
> > hp pavilion dv6-1300sb laptop which is has a
> >
> > 02:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
> >
> > as wireless chip.
> >
> > I needed to install such a bleeding edge distro because opensuse 11.2 does
> > not have the lp_phy driver yet.
> >
> > with dmesg, I see :
> >
> > [ 21.818415] b43 ssb0:0: firmware: requesting b43/ucode15.fw
> > [ 21.820519] b43 ssb0:0: firmware: requesting b43/lp0initvals15.fw
> > [ 21.823084] b43 ssb0:0: firmware: requesting b43/lp0bsinitvals15.fw
> > [ 21.975380] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
> > [ 22.076456] b43-phy0: Radio hardware status changed to DISABLED
> > [ 22.077743] b43-phy0: Radio turned on by software
> > [ 22.077747] b43-phy0: The hardware RF-kill button still turns the radio physically off. Press the button to turn it on.
> > [ 22.078413] ADDRCONF(NETDEV_UP): wlan0: link is not ready
> >
> > this is confirmed by rfkill :
> >
> > 0: phy0: Wireless LAN
> > Soft blocked: no
> > Hard blocked: yes
> >
> > BUT, I DON'T SEE A HARDWARE RF-KILL button; I only see a red-lighted wireless
> > symbol, which is also a touch-key; in console mode, when I touch this
> > touch-key I get a message asking me to
> >
> > 'setkey e014 <keycode>'
> >
> > I have already seen this symbol being blue-lighted in the first seconds of
> > linux booting, but I don't know what changes this color or if this has
> > an effect on the 'hardware' RF-kill button. In the BIOS there is no option
> > to enable or disable the wireless interface.
> >
> > Any hint ?
> >
> > Thanks already for the good work so far
>
> Is the module hp-wmi loaded? That module is designed to implement all of the
> special keys for HP laptops.
>
> Larry
No, thanks for the suggestion. Here is the log of my attempt :
$ modprobe hp-wmi
FATAL: Error inserting hp_wmi (/lib/modules/2.6.33-6-desktop/kernel/drivers/platform/x86/hp-wmi.ko): No such device
and there is nothing in dmesg.
If that can help, here is the output of lspci :
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc M96 [Mobility Radeon HD 4650]
01:00.1 Audio device: ATI Technologies Inc RV710/730
02:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
06:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller
06:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller
06:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller
06:00.3 System peripheral: JMicron Technology Corp. MS Host Controller
06:00.4 System peripheral: JMicron Technology Corp. xD Host Controller
Philippe
next prev parent reply other threads:[~2010-03-30 7:34 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-29 20:12 b43 'hardware blocked' but only keyboard/led touch button Philippe De Muyter
2010-03-29 23:10 ` Larry Finger
2010-03-30 7:34 ` Philippe De Muyter [this message]
2010-03-30 16:47 ` Dan Williams
2010-03-30 17:11 ` Matthew Garrett
2010-03-30 19:26 ` Philippe De Muyter
2010-03-30 19:31 ` Matthew Garrett
2010-03-30 20:00 ` Philippe De Muyter
2010-03-30 20:06 ` Matthew Garrett
2010-03-30 20:43 ` Philippe De Muyter
2010-04-19 11:53 ` Philippe De Muyter
2010-04-19 14:51 ` Matthew Garrett
2010-04-19 15:00 ` Philippe De Muyter
2010-04-19 15:06 ` Matthew Garrett
2010-04-24 5:42 ` Philippe De Muyter
2010-04-24 15:21 ` Matthew Garrett
2010-04-24 19:56 ` Philippe De Muyter
2010-04-24 20:02 ` Matthew Garrett
2010-04-25 19:50 ` Philippe De Muyter
2010-04-25 20:11 ` Larry Finger
2010-05-01 12:17 ` BCM4312 802.11b/g LP-PHY (rev 01) dma & led problems Philippe De Muyter
2010-05-01 16:04 ` Gábor Stefanik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100330073401.GA13675@frolo.macqel \
--to=phdm@macqel.be \
--cc=Larry.Finger@lwfinger.net \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.