From: Mauro Carvalho Chehab <mchehab@redhat.com>
To: linux-input@vger.kernel.org,
Linux Media Mailing List <linux-media@vger.kernel.org>
Subject: [PATCH 06/15] V4L/DVB: ir-core/saa7134: Move ir keyup/keydown code to the ir-core
Date: Thu, 1 Apr 2010 14:56:32 -0300 [thread overview]
Message-ID: <20100401145632.60dd3a16@pedra> (raw)
In-Reply-To: <cover.1270142346.git.mchehab@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/IR/ir-nec-decoder.c b/drivers/media/IR/ir-nec-decoder.c
index 16360eb..a58c717 100644
--- a/drivers/media/IR/ir-nec-decoder.c
+++ b/drivers/media/IR/ir-nec-decoder.c
@@ -30,37 +30,35 @@
#define MIN_BIT0_TIME 360000
#define MAX_BIT0_TIME 760000
-
-/** Decode NEC pulsecode. This code can take up to 76.5 ms to run.
- Unfortunately, using IRQ to decode pulse didn't work, since it uses
- a pulse train of 38KHz. This means one pulse on each 52 us
-*/
-
-int ir_nec_decode(struct input_dev *input_dev,
- struct ir_raw_event *evs,
- int len)
+/**
+ * __ir_nec_decode() - Decode one NEC pulsecode
+ * @input_dev: the struct input_dev descriptor of the device
+ * @evs: event array with type/duration of pulse/space
+ * @len: length of the array
+ * @pos: position to start seeking for a code
+ * This function returns the decoded ircode or -EINVAL if no pulse got decoded
+ */
+static int __ir_nec_decode(struct input_dev *input_dev,
+ struct ir_raw_event *evs,
+ int len, int *pos)
{
- int i, count = -1;
+ int count = -1;
int ircode = 0, not_code = 0;
-#if 0
- /* Needed only after porting the event code to the decoder */
- struct ir_input_dev *ir = input_get_drvdata(input_dev);
-#endif
/* Be sure that the first event is an start one and is a pulse */
- for (i = 0; i < len; i++) {
- if (evs[i].type & (IR_START_EVENT | IR_PULSE))
+ for (; *pos < len; (*pos)++) {
+ if (evs[*pos].type & (IR_START_EVENT | IR_PULSE))
break;
}
- i++; /* First event doesn't contain data */
+ (*pos)++; /* First event doesn't contain data */
- if (i >= len)
+ if (*pos >= len)
return 0;
/* First space should have 4.5 ms otherwise is not NEC protocol */
- if ((evs[i].delta.tv_nsec < MIN_START_TIME) |
- (evs[i].delta.tv_nsec > MAX_START_TIME) |
- (evs[i].type != IR_SPACE))
+ if ((evs[*pos].delta.tv_nsec < MIN_START_TIME) |
+ (evs[*pos].delta.tv_nsec > MAX_START_TIME) |
+ (evs[*pos].type != IR_SPACE))
goto err;
/*
@@ -68,24 +66,24 @@ int ir_nec_decode(struct input_dev *input_dev,
*/
count = 0;
- for (i++; i < len; i++) {
+ for ((*pos)++; *pos < len; (*pos)++) {
int bit;
- if ((evs[i].delta.tv_nsec < MIN_PULSE_TIME) |
- (evs[i].delta.tv_nsec > MAX_PULSE_TIME) |
- (evs[i].type != IR_PULSE))
+ if ((evs[*pos].delta.tv_nsec < MIN_PULSE_TIME) |
+ (evs[*pos].delta.tv_nsec > MAX_PULSE_TIME) |
+ (evs[*pos].type != IR_PULSE))
goto err;
- if (++i >= len)
+ if (++*pos >= len)
goto err;
- if (evs[i].type != IR_SPACE)
+ if (evs[*pos].type != IR_SPACE)
goto err;
- if ((evs[i].delta.tv_nsec > MIN_BIT1_TIME) &&
- (evs[i].delta.tv_nsec < MAX_BIT1_TIME))
+ if ((evs[*pos].delta.tv_nsec > MIN_BIT1_TIME) &&
+ (evs[*pos].delta.tv_nsec < MAX_BIT1_TIME))
bit = 1;
- else if ((evs[i].delta.tv_nsec > MIN_BIT0_TIME) &&
- (evs[i].delta.tv_nsec < MAX_BIT0_TIME))
+ else if ((evs[*pos].delta.tv_nsec > MIN_BIT0_TIME) &&
+ (evs[*pos].delta.tv_nsec < MAX_BIT0_TIME))
bit = 0;
else
goto err;
@@ -120,12 +118,40 @@ int ir_nec_decode(struct input_dev *input_dev,
}
IR_dprintk(1, "NEC scancode 0x%04x\n", ircode);
+ ir_keydown(input_dev, ircode);
+ ir_keyup(input_dev);
return ircode;
err:
IR_dprintk(1, "NEC decoded failed at bit %d while decoding %luus time\n",
- count, (evs[i].delta.tv_nsec + 500) / 1000);
+ count, (evs[*pos].delta.tv_nsec + 500) / 1000);
return -EINVAL;
}
+
+/**
+ * __ir_nec_decode() - Decodes all NEC pulsecodes on a given array
+ * @input_dev: the struct input_dev descriptor of the device
+ * @evs: event array with type/duration of pulse/space
+ * @len: length of the array
+ * This function returns the number of decoded pulses or -EINVAL if no
+ * pulse got decoded
+ */
+int ir_nec_decode(struct input_dev *input_dev,
+ struct ir_raw_event *evs,
+ int len)
+{
+ int pos = 0;
+ int rc = 0;
+
+ while (pos < len) {
+ if (__ir_nec_decode(input_dev, evs, len, &pos) >= 0)
+ rc++;
+ }
+
+ if (!rc)
+ return -EINVAL;
+ return rc;
+}
+
EXPORT_SYMBOL_GPL(ir_nec_decode);
diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index 7382995..740adb3 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -424,18 +424,8 @@ static void saa7134_input_timer(unsigned long data)
void ir_raw_decode_timer_end(unsigned long data)
{
struct saa7134_dev *dev = (struct saa7134_dev *)data;
- struct card_ir *ir = dev->remote;
- int rc;
- /*
- * FIXME: the IR key handling code should be called by the decoder,
- * after implementing the repeat mode
- */
- rc = ir_raw_event_handle(dev->remote->dev);
- if (rc >= 0) {
- ir_input_keydown(ir->dev, &ir->ir, rc);
- ir_input_nokey(ir->dev, &ir->ir);
- }
+ ir_raw_event_handle(dev->remote->dev);
}
void saa7134_ir_start(struct saa7134_dev *dev, struct card_ir *ir)
diff --git a/include/media/ir-core.h b/include/media/ir-core.h
index 198fd61..9e03528 100644
--- a/include/media/ir-core.h
+++ b/include/media/ir-core.h
@@ -84,7 +84,8 @@ struct ir_input_dev {
u32 ir_g_keycode_from_table(struct input_dev *input_dev,
u32 scancode);
-
+void ir_keyup(struct input_dev *dev);
+void ir_keydown(struct input_dev *dev, int scancode);
int ir_input_register(struct input_dev *dev,
const struct ir_scancode_table *ir_codes,
const struct ir_dev_props *props,
--
1.6.6.1
next prev parent reply other threads:[~2010-04-01 17:58 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <cover.1270142346.git.mchehab@redhat.com>
2010-04-01 17:56 ` [PATCH 11/15] V4L/DVB: saa7134: clear warning noise Mauro Carvalho Chehab
2010-04-01 17:56 ` Mauro Carvalho Chehab
2010-04-01 17:56 ` [PATCH 10/15] V4L/DVB: ir-nec-decoder: Add sysfs node to enable/disable per irrcv Mauro Carvalho Chehab
2010-04-01 17:56 ` [PATCH 09/15] V4L/DVB: ir-core: prepare to add more operations for ir decoders Mauro Carvalho Chehab
2010-04-01 17:56 ` [PATCH 14/15] V4L/DVB: cx88: Only start IR if the input device is opened Mauro Carvalho Chehab
2010-04-01 17:56 ` [PATCH 13/15] V4L/DVB: ir-core: Add callbacks for input/evdev open/close on IR core Mauro Carvalho Chehab
2010-04-01 17:56 ` [PATCH 15/15] V4L/DVB: input: Add support for EVIO[CS]GKEYCODEBIG Mauro Carvalho Chehab
2010-04-24 9:09 ` David Härdeman
2010-04-24 9:09 ` David Härdeman
2010-04-01 17:56 ` [PATCH 12/15] V4L/DVB: ir-core: rename sysfs remote controller class from ir to rc Mauro Carvalho Chehab
2010-04-01 17:56 ` [PATCH 04/15] V4L/DVB: ir-core: Add logic to decode IR protocols at the IR core Mauro Carvalho Chehab
2010-04-02 23:39 ` Andy Walls
2010-04-03 0:59 ` Andy Walls
2010-04-03 1:11 ` Mauro Carvalho Chehab
2010-04-03 1:32 ` Mauro Carvalho Chehab
2010-04-03 17:16 ` Andy Walls
2010-04-03 22:56 ` Mauro Carvalho Chehab
2010-04-04 12:35 ` Andy Walls
2010-04-04 18:00 ` Mauro Carvalho Chehab
2010-04-05 1:45 ` Andy Walls
2010-04-05 18:33 ` Mauro Carvalho Chehab
2010-04-06 5:33 ` Mauro Carvalho Chehab
2010-04-01 17:56 ` [PATCH 07/15] V4L/DVB: saa7134: don't wait too much to generate an IR event on raw_decode Mauro Carvalho Chehab
2010-04-01 17:56 ` [PATCH 08/15] V4L/DVB: ir-core: dynamically load the compiled IR protocols Mauro Carvalho Chehab
2010-04-01 17:56 ` Mauro Carvalho Chehab [this message]
2010-04-01 17:56 ` [PATCH 02/15] V4L/DVB: saa7134: use a full scancode table for M135A Mauro Carvalho Chehab
2010-04-01 17:56 ` [PATCH 01/15] V4L/DVB: ir-core: be less pedantic with RC protocol name Mauro Carvalho Chehab
2010-04-01 17:56 ` [PATCH 03/15] V4L/DVB: saa7134: add code to allow changing IR protocol Mauro Carvalho Chehab
2010-04-01 17:56 ` [PATCH 05/15] V4L/DVB: ir-core: add two functions to report keyup/keydown events Mauro Carvalho Chehab
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100401145632.60dd3a16@pedra \
--to=mchehab@redhat.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.