From: Thomas Fjellstrom <tfjellstrom@strangesoft.net>
To: linux-kernel@vger.kernel.org
Subject: Re: Fwd: Can we remove the Zone_DMA?
Date: Sun, 4 Apr 2010 02:16:19 -0600 [thread overview]
Message-ID: <201004040216.19925.tfjellstrom@strangesoft.net> (raw)
In-Reply-To: <201004040349.28840.dhazelton@enter.net>
On April 4, 2010, Daniel Hazelton wrote:
> On Sunday 04 April 2010 01:33:09 am tek-life wrote:
> > Thanks for your reply.And do you means that , If I use a modern PC,such
> > as my pc (CPU:Intel dual-core 2.6GHZ; Memory 2GB; And no pci ).I can
> > remove the ZONE_DMA .And make sure this system also run smoothly as
> > before?
>
> *MAYBE* - if you don't use parallel ports, floppy drives or similar.
> There actually are still a lot of devices that use the ISA bus in a
> modern PC - even the keyboard (well, not USB ones) is an ISA device.
>
> Simple fact is that if it was possible to configure it out and not cause
> massive problems somebody would have already spun out a patch to allow
> just that.
Some onboard motherboard devices may also be ISA devices.
> DRH
>
> > 在 2010年4月4日 下午1:07,Daniel Hazelton <dhazelton@enter.net>写道:
> >
> > On Sunday 04 April 2010 12:21:54 am tek-life wrote:
> > > > I’m a newbie on the linux kernel. Now I am reading the source code
> > > > of Linux . I have a question in the following about ZONE_DMA.
> > > >
> > > >
> > > > In Linux , The Memory is divided to three zone. They are ZONE_DMA
> > > > 、ZONE_NORMAL and ZONE_HIGHMEM. From the book of "Undstand the
> > > > Linux kernel ", the ZONE_DMA has the effect that the Direct Memory
> > > > Access (DMA) processors for old ISA buses have a strong
> > > > limitation: they are able to address only the first 16 MB of RAM.
> > > > SO ,we must set a zone for the DMA on ISA bus. And I suspect
> > > > that the hardware has developed so quickly .And in this days the
> > > > ISA has been weeded out. And so ,if we not defined the ZONE_DMA,
> > > > is the system be effected? And why not remove ZONE_DMA from the
> > > > kernel . If it cann‘t to do so,the compatibility is the only
> > > > reason?
> > >
> > > While ISA is gone as a true peripheral interconnect for new systems
> > > it does,
> > > actually, still live on in a lot of systems that Linux still
> > > supports. While
> > > those systems, generally, are running the same kernel and userspace
> > > they were
> > > a decade ago I have no doubt that somebody might find an old machine
> > > and put
> > > Linux on it - just because they could.
> > >
> > > And that also discounts the non-IBM PC machines that are out there
> > > that Linux
> > > also supports. While I don't know enough about them to say for sure,
> > > I am quite certain that at least some of them are still using the
> > > ISA bus.
> > >
> > > DRH
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel"
> in the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
Thomas Fjellstrom
tfjellstrom@strangesoft.net
next prev parent reply other threads:[~2010-04-04 9:02 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-04 4:21 Can we remove the Zone_DMA? tek-life
2010-04-04 5:07 ` Daniel Hazelton
[not found] ` <k2tc58e39921004032226ze2eb64dev21f8c2d137a49ebc@mail.gmail.com>
2010-04-04 5:33 ` Fwd: " tek-life
2010-04-04 7:49 ` Daniel Hazelton
2010-04-04 8:16 ` Thomas Fjellstrom [this message]
2010-04-04 8:28 ` tek-life
2010-04-04 8:28 ` tek-life
2010-04-04 8:38 ` Eric W. Biederman
2010-04-12 8:41 ` Andi Kleen
2010-04-18 11:04 ` Bernd Petrovitsch
2010-04-19 13:44 ` Lennart Sorensen
2010-04-04 7:31 ` Oliver Neukum
2010-04-04 9:07 ` Joerg Roedel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201004040216.19925.tfjellstrom@strangesoft.net \
--to=tfjellstrom@strangesoft.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.