From mboxrd@z Thu Jan 1 00:00:00 1970 From: Pete Zaitcev Subject: Re: tabled RPM build fails before it succeeds Date: Fri, 16 Apr 2010 14:19:32 -0600 Message-ID: <20100416141932.53294d65@redhat.com> References: <4BC89B88.7050304@garzik.org> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <4BC89B88.7050304@garzik.org> Sender: hail-devel-owner@vger.kernel.org List-ID: Content-Type: text/plain; charset="us-ascii" To: Jeff Garzik Cc: Project Hail On Fri, 16 Apr 2010 13:16:56 -0400 Jeff Garzik wrote: > Build #1 (fails on x86_64): > http://koji.fedoraproject.org/koji/taskinfo?taskID=2119825 PASS: prep-db chunkd[17774]: Waiting for CLD PortFile cld.port cld[17773]: databases up cld[17773]: Listening on port 34671 cld[17773]: initialized: nodebug chunkd[17774]: Using CLD port 34671 chunkd[17775]: Listening on auto port 57521 tabled[17777]: Listening on port 36667 chunkd[17775]: New CLD session created, sid 4D81504D6021608C chunkd[17775]: initialized PASS: start-daemon PASS: pid-exists PASS: daemon-running server is not up after 100 s > Build #2 (fails on i686): > http://koji.fedoraproject.org/koji/taskinfo?taskID=2120174 Same. I think it's time to figure it out. Going for a 100s delay kinda sorta helped, but on second thought: why would any packets get lost at all, on a loopback? I'll try to see if I can reproduce this by overloading the test system. -- Pete