From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean Delvare Date: Tue, 04 May 2010 14:54:54 +0000 Subject: Re: [lm-sensors] [PATCH 4/4] emc1403: thermal sensor support Message-Id: <20100504165454.5f2d02e4@hyperion.delvare> List-Id: References: <20100414125205.23181.15562.stgit@localhost.localdomain> In-Reply-To: <20100414125205.23181.15562.stgit@localhost.localdomain> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org On Tue, 4 May 2010 12:33:00 +0100, Alan Cox wrote: > Agreed - done, and additional detection bits added from your mini-patch > > Can't currently test this however. > > > > emc1403: thermal sensor support > > From: Kalhan Trisal > > Provides support for the emc1403 thermal sensor. Only reporting of values > is supported. The various Moorestown specific extras to do with thermal > alerts and the like are not in this version of the driver. > > Considerably edited and tidied up by Alan Cox, plus fixes and detection bits > from Jean Delvare. > > Signed-off-by: Kalhan Trisal > Signed-off-by: Alan Cox > --- > > drivers/hwmon/Kconfig | 10 + > drivers/hwmon/Makefile | 1 > drivers/hwmon/emc1403.c | 344 +++++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 355 insertions(+), 0 deletions(-) > create mode 100644 drivers/hwmon/emc1403.c > > (...) Fine with me, thank you. I've queued this new driver for merge in 2.6.35-rc1. -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors