From: Alan Cox <alan@linux.intel.com>
To: linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org,
arnd@arndb.de
Subject: [PATCH 10/20] synclink: reworking locking a bit
Date: Wed, 05 May 2010 11:02:36 +0100 [thread overview]
Message-ID: <20100505100236.3595.27264.stgit@localhost.localdomain> (raw)
In-Reply-To: <20100505100144.3595.65633.stgit@localhost.localdomain>
Use the port mutex and port lock to fix the various races. The locking
still isn't totally consistent but its better than before. Wants switching
to the port helpers.
Signed-off-by: Alan Cox <alan@linux.intel.com>
---
drivers/char/synclink_gt.c | 12 +++++++++++-
drivers/char/synclinkmp.c | 9 ++++++++-
2 files changed, 19 insertions(+), 2 deletions(-)
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index d0f81f5..c56b70a 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -675,12 +675,14 @@ static int open(struct tty_struct *tty, struct file *filp)
goto cleanup;
}
+ mutex_lock(&info->port.mutex);
info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
spin_lock_irqsave(&info->netlock, flags);
if (info->netcount) {
retval = -EBUSY;
spin_unlock_irqrestore(&info->netlock, flags);
+ mutex_unlock(&info->port.mutex);
goto cleanup;
}
info->port.count++;
@@ -692,7 +694,7 @@ static int open(struct tty_struct *tty, struct file *filp)
if (retval < 0)
goto cleanup;
}
-
+ mutex_unlock(&info->port.mutex);
retval = block_til_ready(tty, filp, info);
if (retval) {
DBGINFO(("%s block_til_ready rc=%d\n", info->device_name, retval));
@@ -724,12 +726,14 @@ static void close(struct tty_struct *tty, struct file *filp)
if (tty_port_close_start(&info->port, tty, filp) == 0)
goto cleanup;
+ mutex_lock(&info->port.mutex);
if (info->port.flags & ASYNC_INITIALIZED)
wait_until_sent(tty, info->timeout);
flush_buffer(tty);
tty_ldisc_flush(tty);
shutdown(info);
+ mutex_unlock(&info->port.mutex);
tty_port_close_end(&info->port, tty);
info->port.tty = NULL;
@@ -740,17 +744,23 @@ cleanup:
static void hangup(struct tty_struct *tty)
{
struct slgt_info *info = tty->driver_data;
+ unsigned long flags;
if (sanity_check(info, tty->name, "hangup"))
return;
DBGINFO(("%s hangup\n", info->device_name));
flush_buffer(tty);
+
+ mutex_lock(&info->port.mutex);
shutdown(info);
+ spin_lock_irqsave(&info->port.lock, flags);
info->port.count = 0;
info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
info->port.tty = NULL;
+ spin_unlock_irqrestore(&info->port.lock, flags);
+ mutex_unlock(&info->port.mutex);
wake_up_interruptible(&info->port.open_wait);
}
diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c
index 8da976b..cfa581e 100644
--- a/drivers/char/synclinkmp.c
+++ b/drivers/char/synclinkmp.c
@@ -812,13 +812,15 @@ static void close(struct tty_struct *tty, struct file *filp)
if (tty_port_close_start(&info->port, tty, filp) == 0)
goto cleanup;
-
+
+ mutex_lock(&info->port.mutex);
if (info->port.flags & ASYNC_INITIALIZED)
wait_until_sent(tty, info->timeout);
flush_buffer(tty);
tty_ldisc_flush(tty);
shutdown(info);
+ mutex_unlock(&info->port.mutex);
tty_port_close_end(&info->port, tty);
info->port.tty = NULL;
@@ -834,6 +836,7 @@ cleanup:
static void hangup(struct tty_struct *tty)
{
SLMP_INFO *info = tty->driver_data;
+ unsigned long flags;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):%s hangup()\n",
@@ -842,12 +845,16 @@ static void hangup(struct tty_struct *tty)
if (sanity_check(info, tty->name, "hangup"))
return;
+ mutex_lock(&info->port.mutex);
flush_buffer(tty);
shutdown(info);
+ spin_lock_irqsave(&info->port.lock, flags);
info->port.count = 0;
info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
info->port.tty = NULL;
+ spin_unlock_irqrestore(&info->port.lock, flags);
+ mutex_unlock(&info->port.mutex);
wake_up_interruptible(&info->port.open_wait);
}
next prev parent reply other threads:[~2010-05-05 10:41 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-05 10:01 [PATCH 01/20] stallion: prune lock_kernel calls Alan Cox
2010-05-05 10:01 ` [PATCH 02/20] istallion: use bit ops for the board flags Alan Cox
2010-05-05 10:01 ` [PATCH 03/20] riscom8: kill use of lock_kernel Alan Cox
2010-05-05 10:02 ` [PATCH 04/20] isicom: kill off the BKL Alan Cox
2010-05-05 10:02 ` [PATCH 05/20] rocket: kill BKL Alan Cox
2010-05-05 10:02 ` [PATCH 06/20] synclink: kill the big kernel lock Alan Cox
2010-05-05 10:02 ` [PATCH 07/20] cyclades: Kill off BKL usage Alan Cox
2010-05-05 10:02 ` [PATCH 08/20] epca: Kill the big kernel lock Alan Cox
2010-05-05 10:02 ` [PATCH 09/20] specialix; Kill the BKL Alan Cox
2010-05-05 10:02 ` Alan Cox [this message]
2010-05-05 10:02 ` [PATCH 11/20] tty: serial - fix various misuses/mishandlings of port->tty Alan Cox
2010-05-05 10:02 ` [PATCH 12/20] tty: serial - fix tty back references in termios Alan Cox
2010-05-05 10:02 ` [PATCH 13/20] tty: serial - fix tty referencing in set_ldisc Alan Cox
2010-05-05 10:02 ` [PATCH 14/20] vc: Locking clean up Alan Cox
2010-05-05 10:03 ` [PATCH 15/20] tty: Make vt's have a tty_port Alan Cox
2010-05-05 10:03 ` [PATCH 16/20] tty: Move the vt_tty field from the vc_data into the standard tty_port Alan Cox
2010-05-05 10:03 ` [PATCH 17/20] serial: Change the wait for carrier locking Alan Cox
2010-05-05 10:03 ` [PATCH 18/20] serial: add port helpers Alan Cox
2010-05-05 10:03 ` [PATCH 19/20] serial: trim locking on the helpers Alan Cox
2010-05-05 10:03 ` [PATCH 20/20] serial: Use block_til_ready helper Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100505100236.3595.27264.stgit@localhost.localdomain \
--to=alan@linux.intel.com \
--cc=arnd@arndb.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.