All of lore.kernel.org
 help / color / mirror / Atom feed
From: Cyrill Gorcunov <gorcunov@openvz.org>
To: Ingo Molnar <mingo@elte.hu>
Cc: LKML <linux-kernel@vger.kernel.org>,
	Peter Zijlstra <peterz@infradead.org>,
	Steven Rostedt <rostedt@goodmis.org>,
	Frederic Weisbecker <fweisbec@gmail.com>
Subject: [PATCH -tip] x86,perf: P4 PMU -- protect sensible procedures from preemption
Date: Wed, 5 May 2010 19:07:40 +0400	[thread overview]
Message-ID: <20100505150740.GB5686@lenovo> (raw)

Steven reported
|
| I'm getting:
|
| Pid: 3477, comm: perf Not tainted 2.6.34-rc6 #2727
| Call Trace:
|  [<ffffffff811c7565>] debug_smp_processor_id+0xd5/0xf0
|  [<ffffffff81019874>] p4_hw_config+0x2b/0x15c
|  [<ffffffff8107acbc>] ? trace_hardirqs_on_caller+0x12b/0x14f
|  [<ffffffff81019143>] hw_perf_event_init+0x468/0x7be
|  [<ffffffff810782fd>] ? debug_mutex_init+0x31/0x3c
|  [<ffffffff810c68b2>] T.850+0x273/0x42e
|  [<ffffffff810c6cab>] sys_perf_event_open+0x23e/0x3f1
|  [<ffffffff81009e6a>] ? sysret_check+0x2e/0x69
|  [<ffffffff81009e32>] system_call_fastpath+0x16/0x1b
|
| When running perf record in latest tip/perf/core
|

Due to the fact that p4 counters are shared between HT threads
we synthetically divide the whole set of counters into two
non-intersected subsets. And while we're borrowing counters
from these subsets we should not be preempted. So use
get_cpu/put_cpu pair.

Reported-by: Steven Rostedt <rostedt@goodmis.org>
Tested-by: Steven Rostedt <rostedt@goodmis.org>
CC: Steven Rostedt <rostedt@goodmis.org>
CC: Peter Zijlstra <peterz@infradead.org>
CC: Ingo Molnar <mingo@elte.hu>
CC: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
---
 arch/x86/kernel/cpu/perf_event_p4.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

Index: linux-2.6.git/arch/x86/kernel/cpu/perf_event_p4.c
=====================================================================
--- linux-2.6.git.orig/arch/x86/kernel/cpu/perf_event_p4.c
+++ linux-2.6.git/arch/x86/kernel/cpu/perf_event_p4.c
@@ -421,7 +421,7 @@ static u64 p4_pmu_event_map(int hw_event
 
 static int p4_hw_config(struct perf_event *event)
 {
-	int cpu = raw_smp_processor_id();
+	int cpu = get_cpu();
 	u32 escr, cccr;
 
 	/*
@@ -440,7 +440,7 @@ static int p4_hw_config(struct perf_even
 		event->hw.config = p4_set_ht_bit(event->hw.config);
 
 	if (event->attr.type != PERF_TYPE_RAW)
-		return 0;
+		goto out;
 
 	/*
 	 * We don't control raw events so it's up to the caller
@@ -455,6 +455,8 @@ static int p4_hw_config(struct perf_even
 		(p4_config_pack_escr(P4_ESCR_MASK_HT) |
 		 p4_config_pack_cccr(P4_CCCR_MASK_HT));
 
+out:
+	put_cpu();
 	return 0;
 }
 
@@ -741,7 +743,7 @@ static int p4_pmu_schedule_events(struct
 {
 	unsigned long used_mask[BITS_TO_LONGS(X86_PMC_IDX_MAX)];
 	unsigned long escr_mask[BITS_TO_LONGS(ARCH_P4_TOTAL_ESCR)];
-	int cpu = raw_smp_processor_id();
+	int cpu = get_cpu();
 	struct hw_perf_event *hwc;
 	struct p4_event_bind *bind;
 	unsigned int i, thread, num;
@@ -777,6 +779,7 @@ reserve:
 	}
 
 done:
+	put_cpu();
 	return num ? -ENOSPC : 0;
 }
 

             reply	other threads:[~2010-05-05 15:07 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-05-05 15:07 Cyrill Gorcunov [this message]
2010-05-05 16:57 ` [PATCH -tip] x86,perf: P4 PMU -- protect sensible procedures from preemption Frederic Weisbecker
2010-05-05 17:42   ` Cyrill Gorcunov
2010-05-05 17:58     ` Frederic Weisbecker
2010-05-06  6:44     ` Ingo Molnar
2010-05-06  7:39       ` Cyrill Gorcunov
2010-05-06  7:42         ` Ingo Molnar
2010-05-06  7:45           ` Cyrill Gorcunov
2010-05-06 13:45             ` Steven Rostedt
2010-05-06 14:48               ` Cyrill Gorcunov
2010-05-06 15:26                 ` Cyrill Gorcunov
2010-05-06 18:32                   ` Steven Rostedt
2010-05-06 18:36                     ` Cyrill Gorcunov
  -- strict thread matches above, loose matches on Subject: below --
2010-05-07 15:05 Cyrill Gorcunov
2010-05-08  8:06 ` Ingo Molnar
2010-05-08  8:09   ` Cyrill Gorcunov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100505150740.GB5686@lenovo \
    --to=gorcunov@openvz.org \
    --cc=fweisbec@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@elte.hu \
    --cc=peterz@infradead.org \
    --cc=rostedt@goodmis.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.