All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ben Dooks <ben-linux@fluff.org>
To: Mike Frysinger <vapier@gentoo.org>
Cc: linux-i2c@vger.kernel.org, Ben Dooks <ben-linux@fluff.org>,
	linux-kernel@vger.kernel.org,
	Andrew Morton <akpm@linux-foundation.org>,
	uclinux-dist-devel@blackfin.uclinux.org,
	Michael Hennerich <michael.hennerich@analog.com>
Subject: Re: [PATCH] i2c-bfin-twi: handle faulty slave devices better
Date: Sun, 9 May 2010 12:34:20 +0100	[thread overview]
Message-ID: <20100509113420.GB2589@trinity.fluff.org> (raw)
In-Reply-To: <1273403087-3326-1-git-send-email-vapier@gentoo.org>

On Sun, May 09, 2010 at 07:04:47AM -0400, Mike Frysinger wrote:
> From: Michael Hennerich <michael.hennerich@analog.com>
> 
> Faulty slave devices might drive SDA low after a transfer finishes.  So,
> when this scenario is detected, have the master generate up to 8 extra
> clocks until the SDA is properly released.
> 
> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
> ---
> Note: this requires the existing Blackfin TWI patches already sent out

hmm, it is late in the -rc series for anything other than critical
bugfixes, will update series tomorrow.
 
>  drivers/i2c/busses/i2c-bfin-twi.c |   22 ++++++++++++++++++++++
>  1 files changed, 22 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
> index fb26e5c..f9c05e1 100644
> --- a/drivers/i2c/busses/i2c-bfin-twi.c
> +++ b/drivers/i2c/busses/i2c-bfin-twi.c
> @@ -20,6 +20,7 @@
>  #include <linux/completion.h>
>  #include <linux/interrupt.h>
>  #include <linux/platform_device.h>
> +#include <linux/delay.h>
>  
>  #include <asm/blackfin.h>
>  #include <asm/portmux.h>
> @@ -159,6 +160,27 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
>  		if (mast_stat & BUFWRERR)
>  			dev_dbg(&iface->adap.dev, "Buffer Write Error\n");
>  
> +		/* Faulty salve devices, may drive SDA low after a transfer
spello: slave

> +		 * finishes. To release the bus this code generates up to 8
> +		 * extra clocks until SDA is released.
> +		 */
> +
> +		if (read_MASTER_STAT(iface) & SDASEN) {
> +			int cnt = 8;
> +			do {
> +				write_MASTER_CTL(iface, SCLOVR);
> +				udelay(6);
> +				write_MASTER_CTL(iface, 0);
> +				udelay(6);
> +			} while ((read_MASTER_STAT(iface) & SDASEN) && cnt--);
> +
> +			write_MASTER_CTL(iface, SDAOVR | SCLOVR);
> +			udelay(6);
> +			write_MASTER_CTL(iface, SDAOVR);
> +			udelay(6);
> +			write_MASTER_CTL(iface, 0);
> +		}
> +
>  		/* If it is a quick transfer, only address without data,
>  		 * not an err, return 1.
>  		 */
> -- 
> 1.7.1
> 

-- 
-- 
Ben

Q:      What's a light-year?
A:      One-third less calories than a regular year.

  reply	other threads:[~2010-05-09 11:34 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-05-09 11:04 [PATCH] i2c-bfin-twi: handle faulty slave devices better Mike Frysinger
2010-05-09 11:04 ` Mike Frysinger
2010-05-09 11:34 ` Ben Dooks [this message]
     [not found]   ` <20100509113420.GB2589-SMNkleLxa3Z6Wcw2j4pizdi2O/JbrIOy@public.gmane.org>
2010-05-09 18:23     ` Mike Frysinger
2010-05-09 18:23       ` Mike Frysinger
     [not found] ` <1273403087-3326-1-git-send-email-vapier-aBrp7R+bbdUdnm+yROfE0A@public.gmane.org>
2010-05-10 15:33   ` [PATCH v2] " Mike Frysinger
2010-05-10 15:33     ` Mike Frysinger
     [not found]     ` <1273505624-30920-1-git-send-email-vapier-aBrp7R+bbdUdnm+yROfE0A@public.gmane.org>
2010-05-11 23:09       ` Ben Dooks
2010-05-11 23:09         ` Ben Dooks
     [not found]         ` <20100511230901.GA31325-elnMNo+KYs3pIgCt6eIbzw@public.gmane.org>
2010-05-12  0:03           ` Mike Frysinger
2010-05-12  0:03             ` Mike Frysinger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100509113420.GB2589@trinity.fluff.org \
    --to=ben-linux@fluff.org \
    --cc=akpm@linux-foundation.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michael.hennerich@analog.com \
    --cc=uclinux-dist-devel@blackfin.uclinux.org \
    --cc=vapier@gentoo.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.