From: Marek Vasut <marek.vasut@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] Devkit8000: Fix compilation after changes in dm9000
Date: Tue, 11 May 2010 06:25:58 +0200 [thread overview]
Message-ID: <201005110625.58852.marek.vasut@gmail.com> (raw)
In-Reply-To: <201005110547.40562.marek.vasut@gmail.com>
Dne ?t 11. kv?tna 2010 05:47:40 Marek Vasut napsal(a):
> Dne ?t 11. kv?tna 2010 05:28:38 Marek Vasut napsal(a):
> > Dne P? 7. kv?tna 2010 18:58:34 Thomas Weber napsal(a):
> > > On 07.05.2010 17:15, Wolfgang Denk wrote:
> > > Dear Thomas Weber,
> > >
> > > In message <1273242366-6552-1-git-send-email-weber@corscience.de>
> > >
> > > <1273242366-6552-1-git-send-email-weber@corscience.de> you wrote:
> > > In commit a45dde2293c816138e53c26eca6fd0322583f9a6 the I/O accessor
> > > for
> > >
> > > the DM9000 is changed.
> > >
> > > The definition of __io is required to use the standard I/O accessors
> > > from asm/io.h.
> > >
> > > Signed-off-by: Thomas Weber <weber@corscience.de> <weber@corscience.de>
> > > ---
> > >
> > > include/configs/devkit8000.h | 2 ++
> > > 1 files changed, 2 insertions(+), 0 deletions(-)
> > >
> > > diff --git a/include/configs/devkit8000.h
> > > b/include/configs/devkit8000.h index 7d1332f..6e53c0d 100644
> > > --- a/include/configs/devkit8000.h
> > > +++ b/include/configs/devkit8000.h
> > > @@ -31,6 +31,7 @@
> > >
> > > #ifndef __CONFIG_H
> > > #define __CONFIG_H
> > >
> > > +
> > >
> > > Unrelated (und unneeded) change. Please omit this.
> > >
> > > /* High Level Configuration Options */
> > >
> > > #define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */
> > > #define CONFIG_OMAP 1 /* in a TI OMAP core */
> > >
> > > @@ -79,6 +80,7 @@
> > >
> > > #define CONFIG_DM9000_USE_16BIT 1
> > > #define CONFIG_DM9000_NO_SROM 1
> > > #undef CONFIG_DM9000_DEBUG
> > >
> > > +#define __io
> > >
> > > Hm... the commit message says "__io is required to use the standard
> > >
> > > I/O accessors" - but I don't see any of these in this definition here?
> > >
> > > Best regards,
> > >
> > > Wolfgang Denk
> > >
> > > Hi,
> > >
> > > thanks for reviewing the patch.
> > >
> > > In
> > > dm9000.c is <asm/io.h> included and outb, etc. used
> > > and in
> > > arch/arm/include/asm/io.h +201
> > > I found #ifdef __io
> > > but __io wasn't defined.
> > >
> > > I also think, that all arm-boards that uses the dm9000 will have this
> > > problem at the moment. I tried to compile at91sam9261 and got the same
> > > problem.
> > >
> > > Because I have an other problem with gcc I cannot compile completely.
> > >
> > > Thomas
> >
> > 52dbac69c27dee67a4c051b1055d93b0ac4e2062 <-- this one probably causes the
> > other errors
>
> Interesting ... the commit 'doesn't seem to be there'
>
> It seems someone made some inccorect operation with git and some patches
> were forgotten/rewritten by old files.
I take what I said back, it's there, I mislooked.
But, here's a workaround-patch (unapplicable obviously). Conclusion from why it
works with this is up to you:
diff --git a/include/common.h b/include/common.h
index 8bca04f..ce67403 100644
--- a/include/common.h
+++ b/include/common.h
@@ -218,7 +218,7 @@ void hang (void) __attribute__
((noreturn));
/* */
phys_size_t initdram (int);
int display_options (void);
-void print_size(unsigned long long, const char *);
+void print_size(unsigned /*long*/ long, const char *);
int print_buffer (ulong addr, void* data, uint width, uint count, uint
linelen);
/* common/main.c */
diff --git a/lib/display_options.c b/lib/display_options.c
index 86df05d..146e50a 100644
--- a/lib/display_options.c
+++ b/lib/display_options.c
@@ -43,11 +43,11 @@ int display_options (void)
* xxx GiB, xxx.y GiB, etc as needed; allow for optional trailing string
* (like "\n")
*/
-void print_size(unsigned long long size, const char *s)
+void print_size(unsigned /*long*/ long size, const char *s)
{
unsigned long m = 0, n;
- static const char names[] = {'E', 'P', 'T', 'G', 'M', 'K'};
- unsigned long long d = 1ULL << (10 * ARRAY_SIZE(names));
+ static const char names[] = {/*'E', 'P', 'T',*/ 'G', 'M', 'K'};
+ unsigned long /*long*/ d = 1ULL << (10 * ARRAY_SIZE(names));
char c = 0;
unsigned int i;
@@ -59,7 +59,7 @@ void print_size(unsigned long long size, const char *s)
}
if (!c) {
- printf("%llu Bytes%s", size, s);
+ printf("%lu Bytes%s", size, s);
return;
}
next prev parent reply other threads:[~2010-05-11 4:25 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-07 14:26 [U-Boot] [PATCH] Devkit8000: Fix compilation after changes in dm9000 Thomas Weber
2010-05-07 15:15 ` Wolfgang Denk
2010-05-07 16:58 ` Thomas Weber
2010-05-07 19:11 ` Mike Frysinger
2010-05-11 3:19 ` Marek Vasut
2010-05-11 3:28 ` Marek Vasut
2010-05-11 3:47 ` Marek Vasut
2010-05-11 4:25 ` Marek Vasut [this message]
2010-05-11 8:46 ` Thomas Weber
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201005110625.58852.marek.vasut@gmail.com \
--to=marek.vasut@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.