From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: linux-input@vger.kernel.org
Cc: "Florian Ragwitz" <rafl@debian.org>,
"Éric Piel" <E.A.B.Piel@tudelft.nl>,
"Arjan Opmeer" <arjan@opmeer.net>
Subject: [PATCH 1/3] Input: elantech - use all 3 bytes when checking version
Date: Tue, 11 May 2010 01:18:48 -0700 [thread overview]
Message-ID: <20100511081848.10546.95545.stgit@localhost.localdomain> (raw)
Apparently all 3 bytes returned by ETP_FW_VERSION_QUERY are significant
and shoudl be taken into account when matching hardware version/features.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
drivers/input/mouse/elantech.c | 24 ++++++++++++------------
drivers/input/mouse/elantech.h | 5 ++---
2 files changed, 14 insertions(+), 15 deletions(-)
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index 0520c2e..112b4ee 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -185,7 +185,7 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse)
int fingers;
static int old_fingers;
- if (etd->fw_version_maj == 0x01) {
+ if (etd->fw_version < 0x020000) {
/*
* byte 0: D U p1 p2 1 p3 R L
* byte 1: f 0 th tw x9 x8 y9 y8
@@ -227,7 +227,7 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse)
input_report_key(dev, BTN_LEFT, packet[0] & 0x01);
input_report_key(dev, BTN_RIGHT, packet[0] & 0x02);
- if ((etd->fw_version_maj == 0x01) &&
+ if (etd->fw_version < 0x020000 &&
(etd->capabilities & ETP_CAP_HAS_ROCKER)) {
/* rocker up */
input_report_key(dev, BTN_FORWARD, packet[0] & 0x40);
@@ -321,7 +321,7 @@ static int elantech_check_parity_v1(struct psmouse *psmouse)
unsigned char p1, p2, p3;
/* Parity bits are placed differently */
- if (etd->fw_version_maj == 0x01) {
+ if (etd->fw_version < 0x020000) {
/* byte 0: D U p1 p2 1 p3 R L */
p1 = (packet[0] & 0x20) >> 5;
p2 = (packet[0] & 0x10) >> 4;
@@ -457,7 +457,7 @@ static void elantech_set_input_params(struct psmouse *psmouse)
switch (etd->hw_version) {
case 1:
/* Rocker button */
- if ((etd->fw_version_maj == 0x01) &&
+ if (etd->fw_version < 0x020000 &&
(etd->capabilities & ETP_CAP_HAS_ROCKER)) {
__set_bit(BTN_FORWARD, dev->keybit);
__set_bit(BTN_BACK, dev->keybit);
@@ -686,15 +686,14 @@ int elantech_init(struct psmouse *psmouse)
pr_err("elantech.c: failed to query firmware version.\n");
goto init_fail;
}
- etd->fw_version_maj = param[0];
- etd->fw_version_min = param[2];
+
+ etd->fw_version = (param[0] << 16) | (param[1] << 8) | param[2];
/*
* Assume every version greater than this is new EeePC style
* hardware with 6 byte packets
*/
- if ((etd->fw_version_maj == 0x02 && etd->fw_version_min >= 0x30) ||
- etd->fw_version_maj > 0x02) {
+ if (etd->fw_version >= 0x020030) {
etd->hw_version = 2;
/* For now show extra debug information */
etd->debug = 1;
@@ -704,8 +703,9 @@ int elantech_init(struct psmouse *psmouse)
etd->hw_version = 1;
etd->paritycheck = 1;
}
- pr_info("elantech.c: assuming hardware version %d, firmware version %d.%d\n",
- etd->hw_version, etd->fw_version_maj, etd->fw_version_min);
+
+ pr_info("elantech.c: assuming hardware version %d, firmware version %d.%d.%d\n",
+ etd->hw_version, param[0], param[1], param[2]);
if (synaptics_send_cmd(psmouse, ETP_CAPABILITIES_QUERY, param)) {
pr_err("elantech.c: failed to query capabilities.\n");
@@ -720,8 +720,8 @@ int elantech_init(struct psmouse *psmouse)
* a touch action starts causing the mouse cursor or scrolled page
* to jump. Enable a workaround.
*/
- if (etd->fw_version_maj == 0x02 && etd->fw_version_min == 0x22) {
- pr_info("elantech.c: firmware version 2.34 detected, "
+ if (etd->fw_version == 0x020022) {
+ pr_info("elantech.c: firmware version 2.0.34 detected, "
"enabling jumpy cursor workaround\n");
etd->jumpy_cursor = 1;
}
diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h
index feac5f7..ac57bde 100644
--- a/drivers/input/mouse/elantech.h
+++ b/drivers/input/mouse/elantech.h
@@ -100,11 +100,10 @@ struct elantech_data {
unsigned char reg_26;
unsigned char debug;
unsigned char capabilities;
- unsigned char fw_version_maj;
- unsigned char fw_version_min;
- unsigned char hw_version;
unsigned char paritycheck;
unsigned char jumpy_cursor;
+ unsigned char hw_version;
+ unsigned int fw_version;
unsigned char parity[256];
};
next reply other threads:[~2010-05-11 8:18 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-11 8:18 Dmitry Torokhov [this message]
2010-05-11 8:18 ` [PATCH 2/3] Input: elantech - enforce common prefix on messages Dmitry Torokhov
2010-05-11 8:18 ` [PATCH 3/3] Input: elantech - signature Dmitry Torokhov
2010-05-11 21:01 ` Éric Piel
2010-05-11 21:00 ` [PATCH 1/3] Input: elantech - use all 3 bytes when checking version Éric Piel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100511081848.10546.95545.stgit@localhost.localdomain \
--to=dmitry.torokhov@gmail.com \
--cc=E.A.B.Piel@tudelft.nl \
--cc=arjan@opmeer.net \
--cc=linux-input@vger.kernel.org \
--cc=rafl@debian.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.