From: Bruno Randolf <br1@einfach.org>
To: linville@tuxdriver.com
Cc: ath5k-devel@lists.ath5k.org, linux-wireless@vger.kernel.org
Subject: [PATCH 10/12] ath5k: add sysfs files for ANI parameters
Date: Wed, 12 May 2010 18:40:34 +0900 [thread overview]
Message-ID: <20100512094034.6575.76706.stgit@tt-desk> (raw)
In-Reply-To: <20100512093947.6575.99595.stgit@tt-desk>
/sys/class/ieee80211/phy0/device/ani/ani_mode
/sys/class/ieee80211/phy0/device/ani/noise_immunity_level
/sys/class/ieee80211/phy0/device/ani/spur_level
/sys/class/ieee80211/phy0/device/ani/firstep_level
/sys/class/ieee80211/phy0/device/ani/ofdm_weak_signal_detection
/sys/class/ieee80211/phy0/device/ani/cck_weak_signal_detection
/sys/class/ieee80211/phy0/device/ani/noise_immunity_level_max
/sys/class/ieee80211/phy0/device/ani/spur_level_max
/sys/class/ieee80211/phy0/device/ani/firstep_level_max
sysfs has a lot of symlinks, so you can find the files also in other locations,
like (by PCI ID) /sys/devices/pci0000:00/0000:00:11.0/ani and others.
Signed-off-by: Bruno Randolf <br1@einfach.org>
---
drivers/net/wireless/ath/ath5k/Makefile | 1
drivers/net/wireless/ath/ath5k/ath5k.h | 3 +
drivers/net/wireless/ath/ath5k/base.c | 3 +
drivers/net/wireless/ath/ath5k/reset.c | 1
drivers/net/wireless/ath/ath5k/sysfs.c | 116 +++++++++++++++++++++++++++++++
5 files changed, 123 insertions(+), 1 deletions(-)
create mode 100644 drivers/net/wireless/ath/ath5k/sysfs.c
diff --git a/drivers/net/wireless/ath/ath5k/Makefile b/drivers/net/wireless/ath/ath5k/Makefile
index cc09595..2242a14 100644
--- a/drivers/net/wireless/ath/ath5k/Makefile
+++ b/drivers/net/wireless/ath/ath5k/Makefile
@@ -13,5 +13,6 @@ ath5k-y += base.o
ath5k-y += led.o
ath5k-y += rfkill.o
ath5k-y += ani.o
+ath5k-y += sysfs.o
ath5k-$(CONFIG_ATH5K_DEBUG) += debug.o
obj-$(CONFIG_ATH5K) += ath5k.o
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index d6f9afe..eace74d 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -1150,6 +1150,9 @@ struct ath5k_hw {
int ath5k_hw_attach(struct ath5k_softc *sc);
void ath5k_hw_detach(struct ath5k_hw *ah);
+int ath5k_sysfs_register(struct ath5k_softc *sc);
+void ath5k_sysfs_unregister(struct ath5k_softc *sc);
+
/* LED functions */
int ath5k_init_leds(struct ath5k_softc *sc);
void ath5k_led_enable(struct ath5k_softc *sc);
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 3fcf220..053cb36 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -861,6 +861,8 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
ath5k_init_leds(sc);
+ ath5k_sysfs_register(sc);
+
return 0;
err_queues:
ath5k_txq_release(sc);
@@ -896,6 +898,7 @@ ath5k_detach(struct pci_dev *pdev, struct ieee80211_hw *hw)
ath5k_hw_release_tx_queue(sc->ah, sc->bhalq);
ath5k_unregister_leds(sc);
+ ath5k_sysfs_unregister(sc);
/*
* NB: can't reclaim these until after ieee80211_ifdetach
* returns because we'll get called back to reclaim node
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index 2890a7f..b1d3239 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -851,7 +851,6 @@ static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah,
AR5K_PHY_NF_THRESH62,
ee->ee_thr_62[ee_mode]);
-
/* False detect backoff for channels
* that have spur noise. Write the new
* cyclic power RSSI threshold. */
diff --git a/drivers/net/wireless/ath/ath5k/sysfs.c b/drivers/net/wireless/ath/ath5k/sysfs.c
new file mode 100644
index 0000000..90757de
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/sysfs.c
@@ -0,0 +1,116 @@
+#include <linux/device.h>
+#include <linux/pci.h>
+
+#include "base.h"
+#include "ath5k.h"
+#include "reg.h"
+
+#define SIMPLE_SHOW_STORE(name, get, set) \
+static ssize_t ath5k_attr_show_##name(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+{ \
+ struct ath5k_softc *sc = dev_get_drvdata(dev); \
+ return snprintf(buf, PAGE_SIZE, "%d\n", get); \
+} \
+ \
+static ssize_t ath5k_attr_store_##name(struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t count) \
+{ \
+ struct ath5k_softc *sc = dev_get_drvdata(dev); \
+ int val; \
+ \
+ val = (int)simple_strtoul(buf, NULL, 10); \
+ set(sc->ah, val); \
+ return count; \
+} \
+static DEVICE_ATTR(name, S_IRUGO | S_IWUSR, \
+ ath5k_attr_show_##name, ath5k_attr_store_##name)
+
+#define SIMPLE_SHOW(name, get) \
+static ssize_t ath5k_attr_show_##name(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+{ \
+ struct ath5k_softc *sc = dev_get_drvdata(dev); \
+ return snprintf(buf, PAGE_SIZE, "%d\n", get); \
+} \
+static DEVICE_ATTR(name, S_IRUGO, ath5k_attr_show_##name, NULL)
+
+/*** ANI ***/
+
+SIMPLE_SHOW_STORE(ani_mode, sc->ani_state.ani_mode, ath5k_ani_init);
+SIMPLE_SHOW_STORE(noise_immunity_level, sc->ani_state.noise_imm_level,
+ ath5k_ani_set_noise_immunity_level);
+SIMPLE_SHOW_STORE(spur_level, sc->ani_state.spur_level,
+ ath5k_ani_set_spur_immunity_level);
+SIMPLE_SHOW_STORE(firstep_level, sc->ani_state.firstep_level,
+ ath5k_ani_set_firstep_level);
+SIMPLE_SHOW_STORE(ofdm_weak_signal_detection, sc->ani_state.ofdm_weak_sig,
+ ath5k_ani_set_ofdm_weak_signal_detection);
+SIMPLE_SHOW_STORE(cck_weak_signal_detection, sc->ani_state.cck_weak_sig,
+ ath5k_ani_set_cck_weak_signal_detection);
+SIMPLE_SHOW(spur_level_max, sc->ani_state.max_spur_level);
+
+static ssize_t ath5k_attr_show_noise_immunity_level_max(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%d\n", ATH5K_ANI_MAX_NOISE_IMM_LVL);
+}
+static DEVICE_ATTR(noise_immunity_level_max, S_IRUGO,
+ ath5k_attr_show_noise_immunity_level_max, NULL);
+
+static ssize_t ath5k_attr_show_firstep_level_max(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%d\n", ATH5K_ANI_MAX_FIRSTEP_LVL);
+}
+static DEVICE_ATTR(firstep_level_max, S_IRUGO,
+ ath5k_attr_show_firstep_level_max, NULL);
+
+static struct attribute *ath5k_sysfs_entries_ani[] = {
+ &dev_attr_ani_mode.attr,
+ &dev_attr_noise_immunity_level.attr,
+ &dev_attr_spur_level.attr,
+ &dev_attr_firstep_level.attr,
+ &dev_attr_ofdm_weak_signal_detection.attr,
+ &dev_attr_cck_weak_signal_detection.attr,
+ &dev_attr_noise_immunity_level_max.attr,
+ &dev_attr_spur_level_max.attr,
+ &dev_attr_firstep_level_max.attr,
+ NULL
+};
+
+static struct attribute_group ath5k_attribute_group_ani = {
+ .name = "ani",
+ .attrs = ath5k_sysfs_entries_ani,
+};
+
+
+/*** register / unregister ***/
+
+int
+ath5k_sysfs_register(struct ath5k_softc *sc)
+{
+ struct device *dev = &sc->pdev->dev;
+ int err;
+
+ err = sysfs_create_group(&dev->kobj, &ath5k_attribute_group_ani);
+ if (err) {
+ ATH5K_ERR(sc, "failed to create sysfs group\n");
+ return err;
+ }
+
+ return 0;
+}
+
+void
+ath5k_sysfs_unregister(struct ath5k_softc *sc)
+{
+ struct device *dev = &sc->pdev->dev;
+
+ sysfs_remove_group(&dev->kobj, &ath5k_attribute_group_ani);
+}
next prev parent reply other threads:[~2010-05-12 9:40 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-12 9:39 [PATCH 01/12] ath5k: add debugfs file for queue debugging Bruno Randolf
2010-05-12 9:39 ` [PATCH 02/12] ath5k: wake queues on reset Bruno Randolf
2010-05-12 9:39 ` [PATCH 03/12] ath5k: initialize calibration timers Bruno Randolf
2010-05-12 9:40 ` [PATCH 04/12] ath5k: move noise floor calibration into tasklet Bruno Randolf
2010-05-12 9:40 ` [PATCH 05/12] ath5k: Stop queues only for NF calibration Bruno Randolf
2010-05-12 9:40 ` [PATCH 06/12] ath5k: run NF calibration only every 60 seconds Bruno Randolf
2010-05-12 9:40 ` [PATCH 07/12] ath5k: remove ATH_TRACE macro Bruno Randolf
2010-05-12 9:40 ` [PATCH 08/12] ath5k: clarify logic when to enable spur mitigation filter Bruno Randolf
2010-05-12 9:40 ` [PATCH 09/12] ath5k: use ath5k_softc as driver data Bruno Randolf
2010-05-12 9:40 ` Bruno Randolf [this message]
2010-05-12 9:40 ` [PATCH 11/12] ath5k: always calculate ANI listen time Bruno Randolf
2010-05-12 9:40 ` [PATCH 12/12] ath5k: print error message if ANI levels are out of range Bruno Randolf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100512094034.6575.76706.stgit@tt-desk \
--to=br1@einfach.org \
--cc=ath5k-devel@lists.ath5k.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.