From: Mike Snitzer <snitzer@redhat.com>
To: dm-devel@redhat.com
Cc: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Subject: [PATCH] dm: also check for conflicting table type in dm_table_set_type
Date: Thu, 20 May 2010 18:26:26 -0400 [thread overview]
Message-ID: <20100520222625.GA19250@redhat.com> (raw)
Factorize live table type compatibility check into
dm_table_type_matches_live_table(). Catching a conflicting table type
early, during table load, avoids failing during resume -- which always
leaves the DM device suspended.
So also check type during dm_table_set_type() -- which happens as part
of a table load. But preserve the existing check during resume, in
dm_swap_table(), because a racing table load could stage an inactive
table that conflicts with the table type that dm_swap_table() is about
to make live:
table_load() for bio-based do_resume() for rq-based
-----------------------------------------------------------------
dm_table_type_matches_live_table(t)
down_write(_hash_lock)
new_map = hc->new_map
up_write(_hash_lock)
down_write(_hash_lock)
hc->new_map = t
up_write(_hash_lock)
dm_swap_table(md, new_map)
dm_table_type_matches_live_table(t)
__bind(md, new_map)
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
---
drivers/md/dm-table.c | 24 +++++++++++++++++++++++-
drivers/md/dm.c | 6 +-----
drivers/md/dm.h | 1 +
3 files changed, 25 insertions(+), 6 deletions(-)
Index: linux-2.6/drivers/md/dm-table.c
===================================================================
--- linux-2.6.orig/drivers/md/dm-table.c
+++ linux-2.6/drivers/md/dm-table.c
@@ -803,7 +803,7 @@ int dm_table_set_type(struct dm_table *t
if (bio_based) {
/* We must use this table as bio-based */
t->type = DM_TYPE_BIO_BASED;
- return 0;
+ goto finish;
}
BUG_ON(!request_based); /* No targets in this table */
@@ -831,6 +831,10 @@ int dm_table_set_type(struct dm_table *t
t->type = DM_TYPE_REQUEST_BASED;
+finish:
+ if (!dm_table_type_matches_live_table(t))
+ return -EINVAL;
+
return 0;
}
@@ -839,6 +843,24 @@ unsigned dm_table_get_type(struct dm_tab
return t->type;
}
+int dm_table_type_matches_live_table(struct dm_table *t)
+{
+ int r = 1;
+ struct dm_table *live_table = NULL;
+
+ live_table = dm_get_live_table(t->md);
+ if (!live_table)
+ return 1; /* no live table, return success */
+
+ if (dm_table_get_type(live_table) != dm_table_get_type(t)) {
+ DMWARN("can't change the device type after a table is bound");
+ r = 0;
+ }
+ dm_table_put(live_table);
+
+ return r;
+}
+
bool dm_table_request_based(struct dm_table *t)
{
return dm_table_get_type(t) == DM_TYPE_REQUEST_BASED;
Index: linux-2.6/drivers/md/dm.c
===================================================================
--- linux-2.6.orig/drivers/md/dm.c
+++ linux-2.6/drivers/md/dm.c
@@ -2403,12 +2403,8 @@ struct dm_table *dm_swap_table(struct ma
goto out;
}
- /* cannot change the device type, once a table is bound */
- if (md->map &&
- (dm_table_get_type(md->map) != dm_table_get_type(table))) {
- DMWARN("can't change the device type after a table is bound");
+ if (!dm_table_type_matches_live_table(table))
goto out;
- }
map = __bind(md, table, &limits);
Index: linux-2.6/drivers/md/dm.h
===================================================================
--- linux-2.6.orig/drivers/md/dm.h
+++ linux-2.6/drivers/md/dm.h
@@ -61,6 +61,7 @@ int dm_table_any_congested(struct dm_tab
int dm_table_any_busy_target(struct dm_table *t);
int dm_table_set_type(struct dm_table *t);
unsigned dm_table_get_type(struct dm_table *t);
+int dm_table_type_matches_live_table(struct dm_table *t);
bool dm_table_request_based(struct dm_table *t);
int dm_table_alloc_md_mempools(struct dm_table *t);
void dm_table_free_md_mempools(struct dm_table *t);
next reply other threads:[~2010-05-20 22:26 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-20 22:26 Mike Snitzer [this message]
2010-05-21 9:01 ` [PATCH] dm: also check for conflicting table type in dm_table_set_type Kiyoshi Ueda
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100520222625.GA19250@redhat.com \
--to=snitzer@redhat.com \
--cc=dm-devel@redhat.com \
--cc=k-ueda@ct.jp.nec.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.