From: Mikko Rapeli <mikko.rapeli@iki.fi>
To: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-wireless@vger.kernel.org
Subject: Re: [PATCH] Silence debug prints when using adhoc mode
Date: Mon, 24 May 2010 16:59:41 +0300 [thread overview]
Message-ID: <20100524135940.GD19669@nalle> (raw)
In-Reply-To: <1274689457.3743.15.camel@jlt3.sipsolutions.net>
On Mon, May 24, 2010 at 10:24:17AM +0200, Johannes Berg wrote:
> Do I even want to comment on that? In any case -- it's not supposed to
> be spamming you so we want to find the root cause. Can you enable
> verbose IBSS debug to hopefully see why it's happening?
With debug logging the problem seems to go away, I will try the timer
patch next:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.34 (root@totoro) (gcc version 4.4.4 (Debian 4.4.4-2) ) #3 SMP Mon May 24 16:43:52 EEST 2010
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable)
[ 0.000000] BIOS-e820: 000000007f6d0000 - 000000007f6df000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f6df000 - 000000007f700000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
[ 0.000000] DMI present.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7f6d0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DBFFF uncachable
[ 0.000000] DC000-DFFFF write-back
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F700000 mask FFFF00000 uncachable
[ 0.000000] 2 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] found SMP MP-table at [c00f6810] f6810
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 3764f000 - 37ff0000
[ 0.000000] Allocated new RAMDISK: 00100000 - 00aa0ee3
[ 0.000000] Move RAMDISK from 000000003764f000 - 0000000037fefee2 to 00100000 - 00aa0ee2
[ 0.000000] ACPI: RSDP 000f67e0 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 7f6d14a0 00084 (v01 LENOVO TP-79 00002260 LTP 00000000)
[ 0.000000] ACPI: FACP 7f6d1600 000F4 (v03 LENOVO TP-79 00002260 LNVO 00000001)
[ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20100121/tbfadt-526)
[ 0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 000000000000102C/0 (20100121/tbfadt-557)
[ 0.000000] ACPI: DSDT 7f6d195e 0D467 (v01 LENOVO TP-79 00002260 MSFT 0100000E)
[ 0.000000] ACPI: FACS 7f6f4000 00040
[ 0.000000] ACPI: SSDT 7f6d17b4 001AA (v01 LENOVO TP-79 00002260 MSFT 0100000E)
[ 0.000000] ACPI: ECDT 7f6dedc5 00052 (v01 LENOVO TP-79 00002260 LNVO 00000001)
[ 0.000000] ACPI: TCPA 7f6dee17 00032 (v02 LENOVO TP-79 00002260 LNVO 00000001)
[ 0.000000] ACPI: APIC 7f6dee49 00068 (v01 LENOVO TP-79 00002260 LNVO 00000001)
[ 0.000000] ACPI: MCFG 7f6deeb1 0003C (v01 LENOVO TP-79 00002260 LNVO 00000001)
[ 0.000000] ACPI: HPET 7f6deeed 00038 (v01 LENOVO TP-79 00002260 LNVO 00000001)
[ 0.000000] ACPI: BOOT 7f6defd8 00028 (v01 LENOVO TP-79 00002260 LTP 00000001)
[ 0.000000] ACPI: SSDT 7f6f2655 0025F (v01 LENOVO TP-79 00002260 INTL 20050513)
[ 0.000000] ACPI: SSDT 7f6f28b4 000A6 (v01 LENOVO TP-79 00002260 INTL 20050513)
[ 0.000000] ACPI: SSDT 7f6f295a 004F7 (v01 LENOVO TP-79 00002260 INTL 20050513)
[ 0.000000] ACPI: SSDT 7f6f2e51 001D8 (v01 LENOVO TP-79 00002260 INTL 20050513)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1150MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007f6d0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007f6d0
[ 0.000000] On node 0 totalpages: 521838
[ 0.000000] free_area_init_node: node 0, pgdat c137e500, node_mem_map c14a0020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3966 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2302 pages used for memmap
[ 0.000000] HighMem zone: 292308 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] early_res array is doubled to 64 at [8000 - 87ff]
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:70000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s33876 r0 d23468 u2097152
[ 0.000000] pcpu-alloc: s33876 r0 d23468 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517760
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.34 root=UUID=08c11915-82f3-463a-9e61-b66b56205bdf ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Subtract (52 early reservations)
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE
[ 0.000000] #2 [0001000000 - 0001497bc4] TEXT DATA BSS
[ 0.000000] #3 [0001498000 - 000149e138] BRK
[ 0.000000] #4 [00000f6820 - 0000100000] BIOS reserved
[ 0.000000] #5 [00000f6810 - 00000f6820] MP-table mpf
[ 0.000000] #6 [000009f000 - 000009f5a1] BIOS reserved
[ 0.000000] #7 [000009f6b5 - 00000f6810] BIOS reserved
[ 0.000000] #8 [000009f5a1 - 000009f6b5] MP-table mpc
[ 0.000000] #9 [0000002000 - 0000003000] TRAMPOLINE
[ 0.000000] #10 [0000003000 - 0000007000] ACPI WAKEUP
[ 0.000000] #11 [0000007000 - 0000008000] PGTABLE
[ 0.000000] #12 [0000100000 - 0000aa1000] NEW RAMDISK
[ 0.000000] #13 [000149f000 - 00014a0000] BOOTMEM
[ 0.000000] #14 [00014a0000 - 0002490000] BOOTMEM
[ 0.000000] #15 [0001497c00 - 0001497c04] BOOTMEM
[ 0.000000] #16 [0001497c40 - 0001497d00] BOOTMEM
[ 0.000000] #17 [0001497d00 - 0001497d54] BOOTMEM
[ 0.000000] #18 [0002490000 - 0002493000] BOOTMEM
[ 0.000000] #19 [0001497d80 - 0001497dec] BOOTMEM
[ 0.000000] #20 [0002493000 - 0002499000] BOOTMEM
[ 0.000000] #21 [0001497e00 - 0001497e25] BOOTMEM
[ 0.000000] #22 [0001497e40 - 0001497e67] BOOTMEM
[ 0.000000] #23 [000149e140 - 000149e2e4] BOOTMEM
[ 0.000000] #24 [0001497e80 - 0001497ec0] BOOTMEM
[ 0.000000] #25 [0001497ec0 - 0001497f00] BOOTMEM
[ 0.000000] #26 [0001497f00 - 0001497f40] BOOTMEM
[ 0.000000] #27 [0001497f40 - 0001497f80] BOOTMEM
[ 0.000000] #28 [0001497f80 - 0001497fc0] BOOTMEM
[ 0.000000] #29 [0001497fc0 - 0001498000] BOOTMEM
[ 0.000000] #30 [000149e300 - 000149e340] BOOTMEM
[ 0.000000] #31 [000149e340 - 000149e380] BOOTMEM
[ 0.000000] #32 [000149e380 - 000149e3c0] BOOTMEM
[ 0.000000] #33 [000149e3c0 - 000149e400] BOOTMEM
[ 0.000000] #34 [000149e400 - 000149e440] BOOTMEM
[ 0.000000] #35 [000149e440 - 000149e480] BOOTMEM
[ 0.000000] #36 [000149e480 - 000149e4c0] BOOTMEM
[ 0.000000] #37 [000149e4c0 - 000149e500] BOOTMEM
[ 0.000000] #38 [000149e500 - 000149e510] BOOTMEM
[ 0.000000] #39 [000149e540 - 000149e598] BOOTMEM
[ 0.000000] #40 [000149e5c0 - 000149e618] BOOTMEM
[ 0.000000] #41 [0002800000 - 000280e000] BOOTMEM
[ 0.000000] #42 [0002a00000 - 0002a0e000] BOOTMEM
[ 0.000000] #43 [000149e640 - 000149e644] BOOTMEM
[ 0.000000] #44 [000149e680 - 000149e684] BOOTMEM
[ 0.000000] #45 [000149e6c0 - 000149e6c8] BOOTMEM
[ 0.000000] #46 [000149e700 - 000149e708] BOOTMEM
[ 0.000000] #47 [000149e740 - 000149e7e8] BOOTMEM
[ 0.000000] #48 [000149e800 - 000149e868] BOOTMEM
[ 0.000000] #49 [0002499000 - 000249d000] BOOTMEM
[ 0.000000] #50 [000249d000 - 000251d000] BOOTMEM
[ 0.000000] #51 [000251d000 - 000255d000] BOOTMEM
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007f6d0)
[ 0.000000] Memory: 2055476k/2087744k available (2386k kernel code, 31876k reserved, 1222k data, 376k init, 1178440k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc1387000 - 0xc13e5000 ( 376 kB)
[ 0.000000] .data : 0xc1254a7b - 0xc1386558 (1222 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1254a7b (2386 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: PIT calibration matches HPET. 1 loops
[ 0.000000] Detected 1828.737 MHz processor.
[ 0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3657.47 BogoMIPS (lpj=7314948)
[ 0.008030] Security Framework initialized
[ 0.008037] SELinux: Disabled at boot.
[ 0.008046] Mount-cache hash table entries: 512
[ 0.008187] Initializing cgroup subsys ns
[ 0.008191] Initializing cgroup subsys cpuacct
[ 0.008196] Initializing cgroup subsys devices
[ 0.008199] Initializing cgroup subsys freezer
[ 0.008201] Initializing cgroup subsys net_cls
[ 0.008229] CPU: Physical Processor ID: 0
[ 0.008230] CPU: Processor Core ID: 0
[ 0.008234] mce: CPU supports 6 MCE banks
[ 0.008245] CPU0: Thermal monitoring enabled (TM2)
[ 0.008249] using mwait in idle threads.
[ 0.008257] Performance Events: Core events, core PMU driver.
[ 0.008264] ... version: 1
[ 0.008266] ... bit width: 40
[ 0.008268] ... generic registers: 2
[ 0.008270] ... value mask: 000000ffffffffff
[ 0.008273] ... max period: 000000007fffffff
[ 0.008275] ... fixed-purpose events: 0
[ 0.008277] ... event mask: 0000000000000003
[ 0.008281] Checking 'hlt' instruction... OK.
[ 0.025101] ACPI: Core revision 20100121
[ 0.052057] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.052464] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.093711] CPU0: Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08
[ 0.096000] Booting Node 0, Processors #1 Ok.
[ 0.012000] Initializing CPU#1
[ 0.184000] TSC synchronization [CPU#0 -> CPU#1]:
[ 0.184000] Measured 521642 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.184000] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.184017] Brought up 2 CPUs
[ 0.184020] Total of 2 processors activated (7315.07 BogoMIPS).
[ 0.184623] regulator: core version 0.5
[ 0.184623] NET: Registered protocol family 16
[ 0.184623] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.184623] ACPI: bus type pci registered
[ 0.184623] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.184623] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.184623] PCI: Using MMCONFIG for extended config space
[ 0.184623] PCI: Using configuration type 1 for base access
[ 0.184623] bio: create slab <bio-0> at 0
[ 0.188019] ACPI: EC: EC description table is found, configuring boot EC
[ 0.201464] ACPI: SSDT 7f6f1d36 00240 (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
[ 0.202360] ACPI: SSDT 7f6f1ffb 0065A (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
[ 0.203372] ACPI: SSDT 7f6f1c6e 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
[ 0.204069] ACPI: SSDT 7f6f1f76 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
[ 0.204693] ACPI: Interpreter enabled
[ 0.204704] ACPI: (supports S0 S3 S4 S5)
[ 0.204729] ACPI: Using IOAPIC for interrupt routing
[ 0.213492] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.213541] ACPI: Power Resource [PUBS] (on)
[ 0.217416] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.217420] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.217883] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.217934] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.217938] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.217941] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.217945] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.217948] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.217951] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.217955] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
[ 0.218019] pci 0000:00:02.0: reg 10: [mem 0xee100000-0xee17ffff]
[ 0.218025] pci 0000:00:02.0: reg 14: [io 0x1800-0x1807]
[ 0.218030] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[ 0.218035] pci 0000:00:02.0: reg 1c: [mem 0xee200000-0xee23ffff]
[ 0.218072] pci 0000:00:02.1: reg 10: [mem 0xee180000-0xee1fffff]
[ 0.218177] pci 0000:00:1b.0: reg 10: [mem 0xee240000-0xee243fff 64bit]
[ 0.218237] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.218243] pci 0000:00:1b.0: PME# disabled
[ 0.218338] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.218344] pci 0000:00:1c.0: PME# disabled
[ 0.218442] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.218447] pci 0000:00:1c.1: PME# disabled
[ 0.218546] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.218551] pci 0000:00:1c.2: PME# disabled
[ 0.218649] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.218655] pci 0000:00:1c.3: PME# disabled
[ 0.218718] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
[ 0.218780] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
[ 0.218842] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
[ 0.218904] pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
[ 0.218963] pci 0000:00:1d.7: reg 10: [mem 0xee444000-0xee4443ff]
[ 0.219025] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.219031] pci 0000:00:1d.7: PME# disabled
[ 0.219193] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.219198] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.219203] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
[ 0.219208] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
[ 0.219213] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
[ 0.219266] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.219274] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.219282] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.219290] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.219298] pci 0000:00:1f.1: reg 20: [io 0x1810-0x181f]
[ 0.219355] pci 0000:00:1f.2: reg 10: [io 0x18d0-0x18d7]
[ 0.219363] pci 0000:00:1f.2: reg 14: [io 0x18c4-0x18c7]
[ 0.219371] pci 0000:00:1f.2: reg 18: [io 0x18c8-0x18cf]
[ 0.219379] pci 0000:00:1f.2: reg 1c: [io 0x18c0-0x18c3]
[ 0.219387] pci 0000:00:1f.2: reg 20: [io 0x18b0-0x18bf]
[ 0.219395] pci 0000:00:1f.2: reg 24: [mem 0xee444400-0xee4447ff]
[ 0.219432] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.219437] pci 0000:00:1f.2: PME# disabled
[ 0.219500] pci 0000:00:1f.3: reg 20: [io 0x18e0-0x18ff]
[ 0.219704] pci 0000:02:00.0: reg 10: [mem 0xee000000-0xee01ffff]
[ 0.219729] pci 0000:02:00.0: reg 18: [io 0x2000-0x201f]
[ 0.219836] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.219844] pci 0000:02:00.0: PME# disabled
[ 0.219879] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.219885] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.220003] pci 0000:00:1c.0: bridge window [mem 0xee000000-0xee0fffff]
[ 0.220012] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.220209] pci 0000:03:00.0: reg 10: [mem 0xedf00000-0xedf00fff]
[ 0.220451] pci 0000:03:00.0: PME# supported from D0 D3hot
[ 0.220464] pci 0000:03:00.0: PME# disabled
[ 0.220529] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.220534] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff]
[ 0.220540] pci 0000:00:1c.1: bridge window [mem 0xec000000-0xedffffff]
[ 0.220549] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff 64bit pref]
[ 0.220609] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[ 0.220614] pci 0000:00:1c.2: bridge window [io 0x5000-0x6fff]
[ 0.220620] pci 0000:00:1c.2: bridge window [mem 0xe8000000-0xe9ffffff]
[ 0.220628] pci 0000:00:1c.2: bridge window [mem 0xe4100000-0xe41fffff 64bit pref]
[ 0.220688] pci 0000:00:1c.3: PCI bridge to [bus 0c-13]
[ 0.220694] pci 0000:00:1c.3: bridge window [io 0x7000-0x8fff]
[ 0.220699] pci 0000:00:1c.3: bridge window [mem 0xea000000-0xebffffff]
[ 0.220708] pci 0000:00:1c.3: bridge window [mem 0xe4200000-0xe42fffff 64bit pref]
[ 0.220776] pci 0000:15:00.0: reg 10: [mem 0xe4300000-0xe4300fff]
[ 0.220806] pci 0000:15:00.0: supports D1 D2
[ 0.220808] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.220815] pci 0000:15:00.0: PME# disabled
[ 0.220885] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode)
[ 0.220890] pci 0000:00:1e.0: bridge window [io 0x9000-0xcfff]
[ 0.220896] pci 0000:00:1e.0: bridge window [mem 0xe4300000-0xe7ffffff]
[ 0.220905] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe3ffffff 64bit pref]
[ 0.220908] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.220911] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.220914] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.220918] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.220921] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.220924] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.220928] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
[ 0.221014] pci_bus 0000:00: on NUMA node 0
[ 0.221019] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.221173] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[ 0.221253] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.221332] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.221418] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.221504] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.227018] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.227230] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.227439] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.227649] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.227857] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.228078] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.228286] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.228497] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.228618] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.228631] vgaarb: loaded
[ 0.228659] PCI: Using ACPI for IRQ routing
[ 0.228659] PCI: pci_cache_line_size set to 64 bytes
[ 0.228659] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 0.228659] reserve RAM buffer: 000000007f6d0000 - 000000007fffffff
[ 0.228659] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.228659] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.228659] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.232017] Switching to clocksource hpet
[ 0.233496] pnp: PnP ACPI init
[ 0.233505] ACPI: bus type pnp registered
[ 0.237785] pnp: PnP ACPI: found 11 devices
[ 0.237787] ACPI: ACPI bus type pnp unregistered
[ 0.237791] PnPBIOS: Disabled by ACPI PNP
[ 0.237803] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.237807] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.237811] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.237814] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.237817] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.237821] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[ 0.237825] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.237828] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.237832] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.237835] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.237839] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.237843] system 00:00: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.237846] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.237854] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.237857] system 00:02: [io 0x1000-0x107f] has been reserved
[ 0.237861] system 00:02: [io 0x1180-0x11bf] has been reserved
[ 0.237864] system 00:02: [io 0x0800-0x080f] has been reserved
[ 0.237868] system 00:02: [io 0x15e0-0x15ef] has been reserved
[ 0.237871] system 00:02: [io 0x1600-0x165f] could not be reserved
[ 0.237875] system 00:02: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.237879] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.237882] system 00:02: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.237886] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.237889] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.237893] system 00:02: [mem 0xfed40000-0xfed40fff] has been reserved
[ 0.272658] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
[ 0.272662] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.272667] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.272674] pci 0000:00:1c.0: bridge window [mem 0xee000000-0xee0fffff]
[ 0.272679] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref]
[ 0.272688] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.272692] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff]
[ 0.272699] pci 0000:00:1c.1: bridge window [mem 0xec000000-0xedffffff]
[ 0.272705] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff 64bit pref]
[ 0.272713] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[ 0.272717] pci 0000:00:1c.2: bridge window [io 0x5000-0x6fff]
[ 0.272724] pci 0000:00:1c.2: bridge window [mem 0xe8000000-0xe9ffffff]
[ 0.272730] pci 0000:00:1c.2: bridge window [mem 0xe4100000-0xe41fffff 64bit pref]
[ 0.272738] pci 0000:00:1c.3: PCI bridge to [bus 0c-13]
[ 0.272742] pci 0000:00:1c.3: bridge window [io 0x7000-0x8fff]
[ 0.272749] pci 0000:00:1c.3: bridge window [mem 0xea000000-0xebffffff]
[ 0.272755] pci 0000:00:1c.3: bridge window [mem 0xe4200000-0xe42fffff 64bit pref]
[ 0.272764] pci 0000:15:00.0: BAR 15: assigned [mem 0xe0000000-0xe3ffffff pref]
[ 0.272769] pci 0000:15:00.0: BAR 16: assigned [mem 0x84000000-0x87ffffff]
[ 0.272772] pci 0000:15:00.0: BAR 13: assigned [io 0x9000-0x90ff]
[ 0.272775] pci 0000:15:00.0: BAR 14: assigned [io 0x9400-0x94ff]
[ 0.272778] pci 0000:15:00.0: CardBus bridge to [bus 16-17]
[ 0.272781] pci 0000:15:00.0: bridge window [io 0x9000-0x90ff]
[ 0.272787] pci 0000:15:00.0: bridge window [io 0x9400-0x94ff]
[ 0.272794] pci 0000:15:00.0: bridge window [mem 0xe0000000-0xe3ffffff pref]
[ 0.272800] pci 0000:15:00.0: bridge window [mem 0x84000000-0x87ffffff]
[ 0.272807] pci 0000:00:1e.0: PCI bridge to [bus 15-18]
[ 0.272811] pci 0000:00:1e.0: bridge window [io 0x9000-0xcfff]
[ 0.272818] pci 0000:00:1e.0: bridge window [mem 0xe4300000-0xe7ffffff]
[ 0.272823] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe3ffffff 64bit pref]
[ 0.272844] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.272850] pci 0000:00:1c.0: setting latency timer to 64
[ 0.272862] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.272867] pci 0000:00:1c.1: setting latency timer to 64
[ 0.272878] pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.272884] pci 0000:00:1c.2: setting latency timer to 64
[ 0.272897] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.272902] pci 0000:00:1c.3: setting latency timer to 64
[ 0.272908] pci 0000:00:1e.0: enabling device (0005 -> 0007)
[ 0.272915] pci 0000:00:1e.0: setting latency timer to 64
[ 0.272928] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.272936] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.272939] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.272941] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.272944] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.272947] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.272950] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.272953] pci_bus 0000:00: resource 10 [mem 0x80000000-0xfebfffff]
[ 0.272956] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.272959] pci_bus 0000:02: resource 1 [mem 0xee000000-0xee0fffff]
[ 0.272962] pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
[ 0.272965] pci_bus 0000:03: resource 0 [io 0x3000-0x4fff]
[ 0.272968] pci_bus 0000:03: resource 1 [mem 0xec000000-0xedffffff]
[ 0.272971] pci_bus 0000:03: resource 2 [mem 0xe4000000-0xe40fffff 64bit pref]
[ 0.272975] pci_bus 0000:04: resource 0 [io 0x5000-0x6fff]
[ 0.272978] pci_bus 0000:04: resource 1 [mem 0xe8000000-0xe9ffffff]
[ 0.272981] pci_bus 0000:04: resource 2 [mem 0xe4100000-0xe41fffff 64bit pref]
[ 0.272984] pci_bus 0000:0c: resource 0 [io 0x7000-0x8fff]
[ 0.272987] pci_bus 0000:0c: resource 1 [mem 0xea000000-0xebffffff]
[ 0.272990] pci_bus 0000:0c: resource 2 [mem 0xe4200000-0xe42fffff 64bit pref]
[ 0.272993] pci_bus 0000:15: resource 0 [io 0x9000-0xcfff]
[ 0.272996] pci_bus 0000:15: resource 1 [mem 0xe4300000-0xe7ffffff]
[ 0.272999] pci_bus 0000:15: resource 2 [mem 0xe0000000-0xe3ffffff 64bit pref]
[ 0.273002] pci_bus 0000:15: resource 4 [io 0x0000-0x0cf7]
[ 0.273005] pci_bus 0000:15: resource 5 [io 0x0d00-0xffff]
[ 0.273008] pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.273011] pci_bus 0000:15: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.273014] pci_bus 0000:15: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.273016] pci_bus 0000:15: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.273019] pci_bus 0000:15: resource 10 [mem 0x80000000-0xfebfffff]
[ 0.273022] pci_bus 0000:16: resource 0 [io 0x9000-0x90ff]
[ 0.273025] pci_bus 0000:16: resource 1 [io 0x9400-0x94ff]
[ 0.273028] pci_bus 0000:16: resource 2 [mem 0xe0000000-0xe3ffffff pref]
[ 0.273031] pci_bus 0000:16: resource 3 [mem 0x84000000-0x87ffffff]
[ 0.273058] NET: Registered protocol family 2
[ 0.273111] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.273346] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.274044] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.274392] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.274395] TCP reno registered
[ 0.274398] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.274413] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.274514] NET: Registered protocol family 1
[ 0.274533] pci 0000:00:02.0: Boot video device
[ 0.274776] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 0.274834] Unpacking initramfs...
[ 0.616253] Freeing initrd memory: 9860k freed
[ 0.622042] Simple Boot Flag at 0x35 set to 0x1
[ 0.622370] audit: initializing netlink socket (disabled)
[ 0.622387] type=2000 audit(1274709152.620:1): initialized
[ 0.622646] highmem bounce pool size: 64 pages
[ 0.622651] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.624271] VFS: Disk quotas dquot_6.5.2
[ 0.624326] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.624425] msgmni has been set to 1732
[ 0.624667] alg: No test for stdrng (krng)
[ 0.624729] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.624733] io scheduler noop registered
[ 0.624735] io scheduler deadline registered
[ 0.624778] io scheduler cfq registered (default)
[ 0.624879] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.624936] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.625041] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.625092] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.625189] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.625239] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.625339] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.625389] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
[ 0.625586] isapnp: Scanning for PnP cards...
[ 0.980147] isapnp: No Plug & Play device found
[ 0.981366] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.981515] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
[ 0.981853] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.990262] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.990269] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.990321] mice: PS/2 mouse device common for all mice
[ 0.990374] rtc_cmos 00:07: RTC can wake from S4
[ 0.990405] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.990438] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.990449] cpuidle: using governor ladder
[ 0.990452] cpuidle: using governor menu
[ 0.990456] No iBFT detected.
[ 0.990714] TCP cubic registered
[ 0.990887] NET: Registered protocol family 10
[ 0.991270] lo: Disabled Privacy Extensions
[ 0.991534] Mobile IPv6
[ 0.991537] NET: Registered protocol family 17
[ 0.991550] Using IPI No-Shortcut mode
[ 0.991608] registered taskstats version 1
[ 0.992131] rtc_cmos 00:07: setting system clock to 2010-05-24 13:52:33 UTC (1274709153)
[ 0.992235] Freeing unused kernel memory: 376k freed
[ 0.992465] Write protecting the kernel text: 2388k
[ 0.992489] Write protecting the kernel read-only data: 848k
[ 0.995689] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.217359] usbcore: registered new interface driver usbfs
[ 1.217510] usbcore: registered new interface driver hub
[ 1.217559] usbcore: registered new device driver usb
[ 1.239876] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 1.239879] e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
[ 1.239984] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.240012] e1000e 0000:02:00.0: setting latency timer to 64
[ 1.240201] e1000e 0000:02:00.0: irq 28 for MSI/MSI-X
[ 1.240693] e1000e 0000:02:00.0: Disabling ASPM L0s
[ 1.242020] SCSI subsystem initialized
[ 1.242920] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.243182] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 1.243376] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 1.243387] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.243400] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.243404] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.243425] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.243446] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.243458] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.247329] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.247498] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee444000
[ 1.276016] Uniform Multi-Platform E-IDE driver
[ 1.280082] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.280109] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.280112] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.280115] usb usb1: Product: EHCI Host Controller
[ 1.280117] usb usb1: Manufacturer: Linux 2.6.34 ehci_hcd
[ 1.280120] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.280220] hub 1-0:1.0: USB hub found
[ 1.280225] hub 1-0:1.0: 8 ports detected
[ 1.283706] libata version 3.00 loaded.
[ 1.285983] piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x02)
[ 1.285995] PIIX_IDE 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[ 1.286008] piix 0000:00:1f.1: IDE port disabled
[ 1.286017] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
[ 1.286023] ide0: BM-DMA at 0x1810-0x1817
[ 1.286032] Probing IDE interface ide0...
[ 1.293485] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.294968] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.294978] ACPI: Thermal Zone [THM0] (50 C)
[ 1.296465] thermal LNXTHERM:02: registered as thermal_zone1
[ 1.296474] ACPI: Thermal Zone [THM1] (53 C)
[ 1.377411] 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:f0:02:0f:1d:00
[ 1.377414] 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.377553] 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: 005301-003
[ 2.020361] hda: HL-DT-STCD-RW/DVD DRIVE GCC-4247N, ATAPI CD/DVD-ROM drive
[ 2.356053] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.357041] hda: UDMA/33 mode selected
[ 2.358054] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 2.360101] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 2.360286] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 2.360294] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.360304] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.360308] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.360322] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.360360] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820
[ 2.360403] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.360406] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.360409] usb usb2: Product: UHCI Host Controller
[ 2.360411] usb usb2: Manufacturer: Linux 2.6.34 uhci_hcd
[ 2.360414] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.360510] hub 2-0:1.0: USB hub found
[ 2.360515] hub 2-0:1.0: 2 ports detected
[ 2.360593] ahci 0000:00:1f.2: version 3.0
[ 2.360607] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 2.360657] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
[ 2.360727] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
[ 2.360732] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 2.360738] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.360863] scsi0 : ahci
[ 2.361028] scsi1 : ahci
[ 2.361138] scsi2 : ahci
[ 2.361280] scsi3 : ahci
[ 2.361387] ata1: SATA max UDMA/133 abar m1024@0xee444400 port 0xee444500 irq 29
[ 2.361390] ata2: DUMMY
[ 2.361392] ata3: DUMMY
[ 2.361394] ata4: DUMMY
[ 2.361507] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.361517] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.361521] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.361532] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.361571] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840
[ 2.361612] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.361616] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.361619] usb usb3: Product: UHCI Host Controller
[ 2.361621] usb usb3: Manufacturer: Linux 2.6.34 uhci_hcd
[ 2.361624] usb usb3: SerialNumber: 0000:00:1d.1
[ 2.361716] hub 3-0:1.0: USB hub found
[ 2.361721] hub 3-0:1.0: 2 ports detected
[ 2.362035] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[ 2.362207] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[ 2.362215] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.362223] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.362227] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.362236] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.362272] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 2.362309] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.362312] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.362315] usb usb4: Product: UHCI Host Controller
[ 2.362317] usb usb4: Manufacturer: Linux 2.6.34 uhci_hcd
[ 2.362320] usb usb4: SerialNumber: 0000:00:1d.2
[ 2.362397] hub 4-0:1.0: USB hub found
[ 2.362401] hub 4-0:1.0: 2 ports detected
[ 2.362463] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 2.362469] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.362473] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.362481] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.362509] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
[ 2.362543] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.362546] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.362549] usb usb5: Product: UHCI Host Controller
[ 2.362551] usb usb5: Manufacturer: Linux 2.6.34 uhci_hcd
[ 2.362554] usb usb5: SerialNumber: 0000:00:1d.3
[ 2.362629] hub 5-0:1.0: USB hub found
[ 2.362633] hub 5-0:1.0: 2 ports detected
[ 2.680034] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.681072] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 2.681077] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.681082] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.682214] ata1.00: ATA-7: SAMSUNG MMCRE64G5MXP-0VB, VBM1801Q, max UDMA/100
[ 2.682218] ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.682620] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 2.682624] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.682629] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.683753] ata1.00: configured for UDMA/100
[ 2.700630] ata1.00: configured for UDMA/100
[ 2.700634] ata1: EH complete
[ 2.700746] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MMCRE64G VBM1 PQ: 0 ANSI: 5
[ 2.714878] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 2.714940] sd 0:0:0:0: [sda] Write Protect is off
[ 2.714944] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.714971] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.715118] sda: sda1 sda2
[ 2.716190] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.719538] ide-cd driver 5.00
[ 2.721663] ide-cd: hda: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
[ 2.721669] Uniform CD-ROM driver Revision: 3.20
[ 2.845391] device-mapper: uevent: version 1.0.3
[ 2.845529] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 3.157765] udev: starting version 154
[ 3.357084] Linux agpgart interface v0.103
[ 3.360641] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 3.362495] ACPI: Lid Switch [LID]
[ 3.362563] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 3.362570] ACPI: Sleep Button [SLPB]
[ 3.363499] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 3.365418] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 3.365426] ACPI: Power Button [PWRF]
[ 3.389762] intel_rng: FWH not detected
[ 3.391725] ACPI: AC Adapter [AC] (on-line)
[ 3.411929] acpi device:01: registered as cooling_device2
[ 3.412672] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 3.412838] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 3.413394] cfg80211: Calling CRDA to update world regulatory domain
[ 3.425714] Non-volatile memory driver v1.3
[ 3.426338] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[ 3.427456] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 3.432072] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 3.432366] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:2012]
[ 3.432409] yenta_cardbus 0000:15:00.0: Using INTVAL to route CSC interrupts to PCI
[ 3.432412] yenta_cardbus 0000:15:00.0: Routing CardBus interrupts to PCI
[ 3.432420] yenta_cardbus 0000:15:00.0: TI: mfunc 0x01d01002, devctl 0x64
[ 3.432819] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.443382] ACPI: Battery Slot [BAT0] (battery present)
[ 3.445671] udev: renamed network interface eth0 to eth2
[ 3.496913] NET: Registered protocol family 23
[ 3.532450] nsc-ircc, chip->init
[ 3.532464] nsc-ircc, Found chip at base=0x164e
[ 3.532502] nsc-ircc, driver loaded (Dag Brattli)
[ 3.532509] nsc_ircc_open(), can't get iobase of 0x2f8
[ 3.532558] nsc-ircc, Found chip at base=0x164e
[ 3.532599] nsc-ircc, driver loaded (Dag Brattli)
[ 3.532602] nsc_ircc_open(), can't get iobase of 0x2f8
[ 3.533123] nsc-ircc 00:0a: disabled
[ 3.550795] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 3.550799] iwl3945: Copyright(c) 2003-2010 Intel Corporation
[ 3.550910] iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.550926] iwl3945 0000:03:00.0: setting latency timer to 64
[ 3.587988] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 3.587992] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 3.588012] thinkpad_acpi: ThinkPad BIOS 79ETE6WW (2.26 ), EC 79HT50WW-1.07
[ 3.588015] thinkpad_acpi: Lenovo ThinkPad T60, model 1952WUV
[ 3.588334] thinkpad_acpi: radio switch found; radios are enabled
[ 3.588436] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 3.588440] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 3.593630] Registered led device: tpacpi::thinklight
[ 3.593686] Registered led device: tpacpi::power
[ 3.593731] Registered led device: tpacpi::standby
[ 3.593773] Registered led device: tpacpi::thinkvantage
[ 3.596379] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
[ 3.596512] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 3.601276] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[ 3.605769] iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 3.605774] iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 3.606881] iwl3945 0000:03:00.0: irq 30 for MSI/MSI-X
[ 3.621314] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 3.691344] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.691349] hda_intel: probe_mask set to 0x1 for device 17aa:2010
[ 3.691409] HDA Intel 0000:00:1b.0: irq 31 for MSI/MSI-X
[ 3.691443] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 3.710108] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cf8, PCI irq 16
[ 3.710112] yenta_cardbus 0000:15:00.0: Socket status: 30000007
[ 3.710120] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x9000-0xcfff]
[ 3.710124] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x9000-0xcfff: excluding 0x9000-0x90ff 0x9400-0x94ff
[ 3.737390] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 3.739574]
[ 3.739580] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xe4300000-0xe7ffffff]
[ 3.739585] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe4300000-0xe7ffffff: excluding 0xe4300000-0xe46cffff
[ 3.739740] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xe3ffffff 64bit pref]
[ 3.739744] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xe3ffffff: excluding 0xe0000000-0xe3ffffff
[ 3.739766] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x0000-0x0cf7]
[ 3.739769] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0xcf7: excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x377 0x3c0-0x3df 0x3f0-0x3f7 0x4d0-0x4d7 0x800-0x80f
[ 3.748616] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x0d00-0xffff]
[ 3.748621] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xd00-0xffff: excluding 0x1000-0x107f 0x1180-0x11bf 0x15e0-0x15ef 0x1600-0x1607 0x1610-0x161f 0x1648-0x165f 0x1680-0x169f 0x1800-0x1807 0x1810-0x189f 0x18b0-0x18d7 0x18e0-0x18ff 0x2000-0x90ff 0x9400-0x94ff
[ 3.803881] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0x000a0000-0x000bffff]
[ 3.803886] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0a0000-0x0bffff: excluding 0xa0000-0xbffff
[ 3.803901] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0x000d0000-0x000d3fff]
[ 3.803904] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d0000-0x0d3fff: clean.
[ 3.803910] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0x000d4000-0x000d7fff]
[ 3.803913] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d4000-0x0d7fff: clean.
[ 3.803918] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0x000d8000-0x000dbfff]
[ 3.803922] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d8000-0x0dbfff: clean.
[ 3.803927] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0xfebfffff]
[ 3.803931] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0xfebfffff: excluding 0x80000000-0x807fffff 0x84000000-0x87ffffff 0xd0000000-0xe47fffff 0xe8000000-0xee7fffff 0xf0000000-0xf3ffffff 0xfe800000-0xfeffffff
[ 3.817155] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x377
[ 3.819367] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[ 3.820315] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 3.821121] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 3.821969] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xdc000-0xfffff
[ 3.822037] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 3.822104] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[ 3.822174] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 3.925699] Adding 2104476k swap on /dev/sda1. Priority:-1 extents:1 across:2104476k SS
[ 4.039615] loop: module loaded
[ 4.166504] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000/0x0
[ 4.166513] serio: Synaptics pass-through port at isa0060/serio1/input0
[ 4.217734] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 4.333985] fuse init (API version 7.13)
[ 4.369640] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input9
[ 4.413562] apm: BIOS not found.
[ 4.854708] e1000e 0000:02:00.0: irq 28 for MSI/MSI-X
[ 4.858919] Bluetooth: Core ver 2.15
[ 4.865044] NET: Registered protocol family 31
[ 4.865047] Bluetooth: HCI device and connection manager initialized
[ 4.865051] Bluetooth: HCI socket layer initialized
[ 4.882277] lp: driver loaded but no devices found
[ 4.886060] Bluetooth: L2CAP ver 2.14
[ 4.886063] Bluetooth: L2CAP socket layer initialized
[ 4.900469] Bluetooth: RFCOMM TTY layer initialized
[ 4.900474] Bluetooth: RFCOMM socket layer initialized
[ 4.900476] Bluetooth: RFCOMM ver 1.11
[ 4.903063] ppdev: user-space parallel port driver
[ 4.908205] e1000e 0000:02:00.0: irq 28 for MSI/MSI-X
[ 4.908779] ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 4.911529] iwl3945 0000:03:00.0: firmware: requesting iwlwifi-3945-2.ucode
[ 4.936306] iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9
[ 5.019375] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.019378] Bluetooth: BNEP filters: protocol multicast
[ 5.032040] phy0: device now idle
[ 5.036721] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5.049859] Bridge firewalling registered
[ 5.074532] Bluetooth: SCO (Voice Link) ver 0.6
[ 5.074535] Bluetooth: SCO socket layer initialized
[ 5.115612] phy0: device no longer idle - scanning
[ 5.222062] ttyS1: LSR safety check engaged!
[ 5.550908] input: /usr/sbin/thinkpad-keys as /devices/virtual/input/input10
[ 5.712537] [drm] Initialized drm 1.1.0 20060810
[ 5.742545] i915 0000:00:02.0: power state changed by ACPI to D0
[ 5.742591] i915 0000:00:02.0: power state changed by ACPI to D0
[ 5.742599] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.742606] i915 0000:00:02.0: setting latency timer to 64
[ 5.746159] [drm] set up 7M of stolen space
[ 6.178976] [drm] initialized overlay support
[ 6.649625] Console: switching to colour frame buffer device 128x48
[ 6.649633] fb0: inteldrmfb frame buffer device
[ 6.649636] registered panic notifier
[ 6.649645] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 7.820183] phy0: device now idle
[ 9.800094] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 10.036720] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input11
[ 12.522112] phy0: device no longer idle - in use
[ 12.524868] wlan0: sta_find_ibss (active_ibss=0)
[ 12.524877] sta_find_ibss: selected 06:be:a1:c9:16:c0 current 00:00:00:00:00:00
[ 12.524879] wlan0: Selected IBSS BSSID 06:be:a1:c9:16:c0 based on configured SSID
[ 12.604735] phy0: Adding new IBSS station 00:08:a1:8a:d8:bf (dev=wlan0)
[ 12.604743] phy0: Allocated STA 00:08:a1:8a:d8:bf
[ 12.604747] phy0: Added IBSS STA 00:08:a1:8a:d8:bf
[ 12.604758] phy0: Finished adding IBSS STA 00:08:a1:8a:d8:bf
[ 23.044068] wlan0: no IPv6 routers present
[ 29.108889] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 29.108899] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 29.108921] wlan0: RX ProbeReq SA=00:11:09:9a:bd:3a DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 29.108928] wlan0: Sending ProbeResp to 00:11:09:9a:bd:3a
[ 30.985706] wlan0: RX ProbeReq SA=00:25:56:b3:06:f3 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 30.985715] wlan0: Sending ProbeResp to 00:25:56:b3:06:f3
[ 31.090023] wlan0: RX ProbeReq SA=00:25:56:b3:06:f3 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 31.090031] wlan0: Sending ProbeResp to 00:25:56:b3:06:f3
[ 31.195035] wlan0: RX ProbeReq SA=00:25:56:b3:06:f3 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 31.195043] wlan0: Sending ProbeResp to 00:25:56:b3:06:f3
[ 31.406864] wlan0: RX ProbeReq SA=00:25:56:b3:06:f3 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 31.406873] wlan0: Sending ProbeResp to 00:25:56:b3:06:f3
[ 41.662474] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 41.662484] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 45.671412] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 45.671422] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 47.674368] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 47.674378] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 49.678332] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 49.678342] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 59.698165] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 59.698175] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 63.707071] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 63.707081] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 68.852134] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 68.852144] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 69.706594] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 69.706604] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 69.718985] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 69.718992] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 69.726177] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 69.726184] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 69.747119] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 69.747126] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 69.766758] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 69.766765] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 69.787578] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 69.787585] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 69.806776] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 69.806783] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 69.827599] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 69.827606] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 69.846801] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 69.846808] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 71.721950] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 71.721960] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 77.733841] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 77.733851] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 79.737786] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 79.737795] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 81.742754] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 81.742763] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 87.642155] wlan0: RX ProbeReq SA=00:11:09:9a:bd:3a DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 87.642165] wlan0: Sending ProbeResp to 00:11:09:9a:bd:3a
[ 87.706128] wlan0: RX ProbeReq SA=00:11:09:9a:bd:3a DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 87.706135] wlan0: Sending ProbeResp to 00:11:09:9a:bd:3a
[ 87.754653] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 87.754662] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 87.770124] wlan0: RX ProbeReq SA=00:11:09:9a:bd:3a DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 87.770132] wlan0: Sending ProbeResp to 00:11:09:9a:bd:3a
[ 87.834147] wlan0: RX ProbeReq SA=00:11:09:9a:bd:3a DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 87.834154] wlan0: Sending ProbeResp to 00:11:09:9a:bd:3a
[ 91.089016] wlan0: RX ProbeReq SA=00:25:56:b3:06:f3 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 91.089022] wlan0: Sending ProbeResp to 00:25:56:b3:06:f3
[ 91.194146] wlan0: RX ProbeReq SA=00:25:56:b3:06:f3 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 91.194155] wlan0: Sending ProbeResp to 00:25:56:b3:06:f3
[ 91.300366] wlan0: RX ProbeReq SA=00:25:56:b3:06:f3 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 91.300377] wlan0: Sending ProbeResp to 00:25:56:b3:06:f3
[ 91.405092] wlan0: RX ProbeReq SA=00:25:56:b3:06:f3 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 91.405101] wlan0: Sending ProbeResp to 00:25:56:b3:06:f3
[ 95.761530] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 95.761540] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 109.181057] CE: hpet increased min_delta_ns to 7500 nsec
[ 110.933060] CE: hpet increased min_delta_ns to 11250 nsec
[ 111.794253] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 111.794262] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 129.709086] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 129.709096] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 129.728228] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 129.728236] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 129.749103] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 129.749110] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 129.768203] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 129.768211] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 129.789139] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 129.789146] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 129.808304] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 129.808311] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 129.829058] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 129.829065] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 129.829906] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 129.829913] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 133.836815] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 133.836822] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 135.841819] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 135.841829] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 147.635869] wlan0: RX ProbeReq SA=00:11:09:9a:bd:3a DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 147.635879] wlan0: Sending ProbeResp to 00:11:09:9a:bd:3a
[ 147.699839] wlan0: RX ProbeReq SA=00:11:09:9a:bd:3a DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 147.699847] wlan0: Sending ProbeResp to 00:11:09:9a:bd:3a
[ 147.763843] wlan0: RX ProbeReq SA=00:11:09:9a:bd:3a DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 147.763851] wlan0: Sending ProbeResp to 00:11:09:9a:bd:3a
[ 147.827844] wlan0: RX ProbeReq SA=00:11:09:9a:bd:3a DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 147.827851] wlan0: Sending ProbeResp to 00:11:09:9a:bd:3a
[ 150.983640] wlan0: RX ProbeReq SA=00:25:56:b3:06:f3 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 150.983650] wlan0: Sending ProbeResp to 00:25:56:b3:06:f3
[ 151.088054] wlan0: RX ProbeReq SA=00:25:56:b3:06:f3 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 151.088062] wlan0: Sending ProbeResp to 00:25:56:b3:06:f3
[ 151.300117] wlan0: RX ProbeReq SA=00:25:56:b3:06:f3 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 151.300127] wlan0: Sending ProbeResp to 00:25:56:b3:06:f3
[ 151.405105] wlan0: RX ProbeReq SA=00:25:56:b3:06:f3 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 151.405114] wlan0: Sending ProbeResp to 00:25:56:b3:06:f3
[ 171.085576] wlan0: RX ProbeReq SA=00:19:99:1d:cf:38 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 171.085586] wlan0: Sending ProbeResp to 00:19:99:1d:cf:38
[ 189.707544] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 189.707554] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 189.727003] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 189.727011] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 189.747523] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 189.747531] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 189.766690] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 189.766698] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 189.787509] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 189.787517] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 189.806709] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 189.806716] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 189.829977] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 189.829985] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 199.959708] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 199.959717] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 209.125418] wlan0: RX ProbeReq SA=00:11:09:9a:bd:3a DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 209.125428] wlan0: Sending ProbeResp to 00:11:09:9a:bd:3a
[ 209.125450] wlan0: RX ProbeReq SA=00:11:09:9a:bd:3a DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 209.125457] wlan0: Sending ProbeResp to 00:11:09:9a:bd:3a
[ 210.982887] wlan0: RX ProbeReq SA=00:25:56:b3:06:f3 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 210.982896] wlan0: Sending ProbeResp to 00:25:56:b3:06:f3
[ 211.087134] wlan0: RX ProbeReq SA=00:25:56:b3:06:f3 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 211.087142] wlan0: Sending ProbeResp to 00:25:56:b3:06:f3
[ 211.403394] wlan0: RX ProbeReq SA=00:25:56:b3:06:f3 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 211.403404] wlan0: Sending ProbeResp to 00:25:56:b3:06:f3
next prev parent reply other threads:[~2010-05-24 14:00 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-23 16:22 [PATCH] Silence debug prints when using adhoc mode Mikko Rapeli
2010-05-23 16:31 ` Mikko Rapeli
2010-05-24 8:04 ` Johannes Berg
2010-05-24 8:05 ` Johannes Berg
2010-05-24 8:09 ` Johannes Berg
2010-05-24 8:14 ` Mikko Rapeli
2010-05-24 8:24 ` Johannes Berg
2010-05-24 8:28 ` Mikko Rapeli
2010-05-24 13:59 ` Mikko Rapeli [this message]
2010-05-24 19:14 ` Mikko Rapeli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100524135940.GD19669@nalle \
--to=mikko.rapeli@iki.fi \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.