[PATCH RESEND] FusionHDTV: Use quick reads for I2C IR device probing

[Jean Delvare <khali@linux-fr.org>]

IR support on FusionHDTV cards is broken since kernel 2.6.31. One side
effect of the switch to the standard binding model for IR I2C devices
was to let i2c-core do the probing instead of the ir-kbd-i2c driver.
There is a slight difference between the two probe methods: i2c-core
uses 0-byte writes, while the ir-kbd-i2c was using 0-byte reads. As
some IR I2C devices only support reads, the new probe method fails to
detect them.

For now, revert to letting the driver do the probe, using 0-byte
reads. In the future, i2c-core will be extended to let callers of
i2c_new_probed_device() provide a custom probing function.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: "Timothy D. Lenz" <tlenz@vorgon.com>
---
This fix applies to kernels 2.6.31 to 2.6.34. Should be sent to Linus
quickly. I had already sent on March 29th, but apparently it was
overlooked. I have further i2c patches which depend on this one, so
please process it quickly, otherwise I'll have to push it myself.

 drivers/media/video/cx23885/cx23885-i2c.c |   12 +++++++++++-
 drivers/media/video/cx88/cx88-i2c.c       |   16 +++++++++++++++-
 2 files changed, 26 insertions(+), 2 deletions(-)

--- linux-2.6.34-rc1.orig/drivers/media/video/cx23885/cx23885-i2c.c	2010-02-25 09:10:33.000000000 +0100
+++ linux-2.6.34-rc1/drivers/media/video/cx23885/cx23885-i2c.c	2010-03-18 13:33:05.000000000 +0100
@@ -365,7 +365,17 @@ int cx23885_i2c_register(struct cx23885_
 
 		memset(&info, 0, sizeof(struct i2c_board_info));
 		strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
-		i2c_new_probed_device(&bus->i2c_adap, &info, addr_list);
+		/*
+		 * We can't call i2c_new_probed_device() because it uses
+		 * quick writes for probing and the IR receiver device only
+		 * replies to reads.
+		 */
+		if (i2c_smbus_xfer(&bus->i2c_adap, addr_list[0], 0,
+				   I2C_SMBUS_READ, 0, I2C_SMBUS_QUICK,
+				   NULL) >= 0) {
+			info.addr = addr_list[0];
+			i2c_new_device(&bus->i2c_adap, &info);
+		}
 	}
 
 	return bus->i2c_rc;
--- linux-2.6.34-rc1.orig/drivers/media/video/cx88/cx88-i2c.c	2010-02-25 09:08:40.000000000 +0100
+++ linux-2.6.34-rc1/drivers/media/video/cx88/cx88-i2c.c	2010-03-18 13:33:05.000000000 +0100
@@ -188,10 +188,24 @@ int cx88_i2c_init(struct cx88_core *core
 			0x18, 0x6b, 0x71,
 			I2C_CLIENT_END
 		};
+		const unsigned short *addrp;
 
 		memset(&info, 0, sizeof(struct i2c_board_info));
 		strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
-		i2c_new_probed_device(&core->i2c_adap, &info, addr_list);
+		/*
+		 * We can't call i2c_new_probed_device() because it uses
+		 * quick writes for probing and at least some R receiver
+		 * devices only reply to reads.
+		 */
+		for (addrp = addr_list; *addrp != I2C_CLIENT_END; addrp++) {
+			if (i2c_smbus_xfer(&core->i2c_adap, *addrp, 0,
+					   I2C_SMBUS_READ, 0,
+					   I2C_SMBUS_QUICK, NULL) >= 0) {
+				info.addr = *addrp;
+				i2c_new_device(&core->i2c_adap, &info);
+				break;
+			}
+		}
 	}
 	return core->i2c_rc;
 }


-- 
Jean Delvare