From: Jarod Wilson <jarod@redhat.com>
To: linux-media@vger.kernel.org
Subject: [PATCH] IR/imon: clean up usage of bools
Date: Wed, 26 May 2010 16:54:07 -0400 [thread overview]
Message-ID: <20100526205407.GA5255@redhat.com> (raw)
There was a mix of 0/1 and false/true. Pick one convention and stick
with it (I picked false/true).
I sent this once before, but it seems to have lost its way somehow, so
apologies if this is a duplicate...
Signed-off-by: Jarod Wilson <jarod@redhat.com>
---
drivers/media/IR/imon.c | 48 +++++++++++++++++++++++-----------------------
1 files changed, 24 insertions(+), 24 deletions(-)
diff --git a/drivers/media/IR/imon.c b/drivers/media/IR/imon.c
index 5e20456..2bae9ba 100644
--- a/drivers/media/IR/imon.c
+++ b/drivers/media/IR/imon.c
@@ -385,7 +385,7 @@ static int display_open(struct inode *inode, struct file *file)
err("%s: display port is already open", __func__);
retval = -EBUSY;
} else {
- ictx->display_isopen = 1;
+ ictx->display_isopen = true;
file->private_data = ictx;
dev_dbg(ictx->dev, "display port opened\n");
}
@@ -422,7 +422,7 @@ static int display_close(struct inode *inode, struct file *file)
err("%s: display is not open", __func__);
retval = -EIO;
} else {
- ictx->display_isopen = 0;
+ ictx->display_isopen = false;
dev_dbg(ictx->dev, "display port closed\n");
if (!ictx->dev_present_intf0) {
/*
@@ -491,12 +491,12 @@ static int send_packet(struct imon_context *ictx)
}
init_completion(&ictx->tx.finished);
- ictx->tx.busy = 1;
+ ictx->tx.busy = true;
smp_rmb(); /* ensure later readers know we're busy */
retval = usb_submit_urb(ictx->tx_urb, GFP_KERNEL);
if (retval) {
- ictx->tx.busy = 0;
+ ictx->tx.busy = false;
smp_rmb(); /* ensure later readers know we're not busy */
err("%s: error submitting urb(%d)", __func__, retval);
} else {
@@ -682,7 +682,7 @@ static ssize_t store_associate_remote(struct device *d,
return -ENODEV;
mutex_lock(&ictx->lock);
- ictx->rf_isassociating = 1;
+ ictx->rf_isassociating = true;
send_associate_24g(ictx);
mutex_unlock(&ictx->lock);
@@ -950,7 +950,7 @@ static void usb_tx_callback(struct urb *urb)
ictx->tx.status = urb->status;
/* notify waiters that write has finished */
- ictx->tx.busy = 0;
+ ictx->tx.busy = false;
smp_rmb(); /* ensure later readers know we're not busy */
complete(&ictx->tx.finished);
}
@@ -1215,7 +1215,7 @@ static bool imon_mouse_event(struct imon_context *ictx,
{
char rel_x = 0x00, rel_y = 0x00;
u8 right_shift = 1;
- bool mouse_input = 1;
+ bool mouse_input = true;
int dir = 0;
/* newer iMON device PAD or mouse button */
@@ -1246,7 +1246,7 @@ static bool imon_mouse_event(struct imon_context *ictx,
} else if (ictx->kc == KEY_CHANNELDOWN && (buf[2] & 0x40) != 0x40) {
dir = -1;
} else
- mouse_input = 0;
+ mouse_input = false;
if (mouse_input) {
dev_dbg(ictx->dev, "sending mouse data via input subsystem\n");
@@ -1450,7 +1450,7 @@ static void imon_incoming_packet(struct imon_context *ictx,
unsigned char *buf = urb->transfer_buffer;
struct device *dev = ictx->dev;
u32 kc;
- bool norelease = 0;
+ bool norelease = false;
int i;
u64 temp_key;
u64 panel_key = 0;
@@ -1517,7 +1517,7 @@ static void imon_incoming_packet(struct imon_context *ictx,
!(buf[1] & 0x1 || buf[1] >> 2 & 0x1))) {
len = 8;
imon_pad_to_keys(ictx, buf);
- norelease = 1;
+ norelease = true;
}
if (debug) {
@@ -1580,7 +1580,7 @@ not_input_data:
(buf[6] == 0x5E && buf[7] == 0xDF))) { /* DT */
dev_warn(dev, "%s: remote associated refid=%02X\n",
__func__, buf[1]);
- ictx->rf_isassociating = 0;
+ ictx->rf_isassociating = false;
}
}
@@ -1790,9 +1790,9 @@ static bool imon_find_endpoints(struct imon_context *ictx,
int ifnum = iface_desc->desc.bInterfaceNumber;
int num_endpts = iface_desc->desc.bNumEndpoints;
int i, ep_dir, ep_type;
- bool ir_ep_found = 0;
- bool display_ep_found = 0;
- bool tx_control = 0;
+ bool ir_ep_found = false;
+ bool display_ep_found = false;
+ bool tx_control = false;
/*
* Scan the endpoint list and set:
@@ -1808,13 +1808,13 @@ static bool imon_find_endpoints(struct imon_context *ictx,
ep_type == USB_ENDPOINT_XFER_INT) {
rx_endpoint = ep;
- ir_ep_found = 1;
+ ir_ep_found = true;
dev_dbg(ictx->dev, "%s: found IR endpoint\n", __func__);
} else if (!display_ep_found && ep_dir == USB_DIR_OUT &&
ep_type == USB_ENDPOINT_XFER_INT) {
tx_endpoint = ep;
- display_ep_found = 1;
+ display_ep_found = true;
dev_dbg(ictx->dev, "%s: found display endpoint\n", __func__);
}
}
@@ -1835,8 +1835,8 @@ static bool imon_find_endpoints(struct imon_context *ictx,
* newer iMON devices that use control urb instead of interrupt
*/
if (!display_ep_found) {
- tx_control = 1;
- display_ep_found = 1;
+ tx_control = true;
+ display_ep_found = true;
dev_dbg(ictx->dev, "%s: device uses control endpoint, not "
"interface OUT endpoint\n", __func__);
}
@@ -1847,7 +1847,7 @@ static bool imon_find_endpoints(struct imon_context *ictx,
* and without... :\
*/
if (ictx->display_type == IMON_DISPLAY_TYPE_NONE) {
- display_ep_found = 0;
+ display_ep_found = false;
dev_dbg(ictx->dev, "%s: device has no display\n", __func__);
}
@@ -1856,7 +1856,7 @@ static bool imon_find_endpoints(struct imon_context *ictx,
* that refers to e.g. /dev/lcd0 (a character device LCD or VFD).
*/
if (ictx->display_type == IMON_DISPLAY_TYPE_VGA) {
- display_ep_found = 0;
+ display_ep_found = false;
dev_dbg(ictx->dev, "%s: iMON Touch device found\n", __func__);
}
@@ -1905,7 +1905,7 @@ static struct imon_context *imon_init_intf0(struct usb_interface *intf)
ictx->dev = dev;
ictx->usbdev_intf0 = usb_get_dev(interface_to_usbdev(intf));
- ictx->dev_present_intf0 = 1;
+ ictx->dev_present_intf0 = true;
ictx->rx_urb_intf0 = rx_urb;
ictx->tx_urb = tx_urb;
@@ -1979,7 +1979,7 @@ static struct imon_context *imon_init_intf1(struct usb_interface *intf,
}
ictx->usbdev_intf1 = usb_get_dev(interface_to_usbdev(intf));
- ictx->dev_present_intf1 = 1;
+ ictx->dev_present_intf1 = true;
ictx->rx_urb_intf1 = rx_urb;
ret = -ENODEV;
@@ -2297,7 +2297,7 @@ static void __devexit imon_disconnect(struct usb_interface *interface)
}
if (ifnum == 0) {
- ictx->dev_present_intf0 = 0;
+ ictx->dev_present_intf0 = false;
usb_kill_urb(ictx->rx_urb_intf0);
input_unregister_device(ictx->idev);
if (ictx->display_supported) {
@@ -2307,7 +2307,7 @@ static void __devexit imon_disconnect(struct usb_interface *interface)
usb_deregister_dev(interface, &imon_vfd_class);
}
} else {
- ictx->dev_present_intf1 = 0;
+ ictx->dev_present_intf1 = false;
usb_kill_urb(ictx->rx_urb_intf1);
if (ictx->display_type == IMON_DISPLAY_TYPE_VGA)
input_unregister_device(ictx->touch);
--
Jarod Wilson
jarod@redhat.com
next reply other threads:[~2010-05-26 20:54 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-26 20:54 Jarod Wilson [this message]
-- strict thread matches above, loose matches on Subject: below --
2010-05-24 15:00 [PATCH] IR/imon: clean up usage of bools Jarod Wilson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100526205407.GA5255@redhat.com \
--to=jarod@redhat.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.