From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean Delvare Date: Sat, 29 May 2010 19:47:50 +0000 Subject: Re: [lm-sensors] k10temp module not working with AMD X2 240 and Message-Id: <20100529214750.15e18e79@hyperion.delvare> List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Hi Larry, On Thu, 20 May 2010 18:26:29 -0700, Larry Gagnon wrote: > Using the Zotac GF-8200-C-E motherboard with an Athlon II X2 240 CPU. > 'sensors-detect' finds the k10temp chip and I have modprobed the "k10temp" > module successfully. I use the 2.6.33 kernel so k10temp is included. > However, on running "sensors" an error is thrown that do not have the > correct kernel modules loaded: > > "No sensors found! > Make sure you loaded all the kernl drivers you need...". > > Any ideas greatly appreciated. Which version of sensors-detect? A number of family 10h CPU models have broken sensors, thus k10temp will refuse to bind to them. I guess your CPU is one of these. Please share the contents of /proc/cpuinfo. -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors