Re: [PATCH v2] omap4: Fix multi-omap boot with reset un-used clocks

[Tony Lindgren <tony@atomide.com>]

* Paul Walmsley <paul@pwsan.com> [100520 02:05]:
> Hi,
> 
> On Wed, 19 May 2010, Santosh Shilimkar wrote:
> 
> > This patch uses "ENABLE_ON_INIT" flag on the emif clock nodes
> > to avoid the emif clk getting cut as part of reset un-used clock
> > routine which prevents boot.
> > 
> > Since omap4 "omap2_clk_init()" calls "clk_enable_init_clocks()"
> > which increases the usecount on all ENABLE_ON_INIT clocks, it
> > prevents "omap2_clk_disable_unused()" from disabling the clock.
> > 
> > The real fix is to have driver for EMIF and do clock get/enable
> > as part of it. The EMIF driver is planned to be done HWMOD way
> > so till that available to keep omap3_defconfig booting on OMAP4430,
> > this patch is necessary.
> > (Will updated the auto-gen script for 44xx accordingly)
> > 
> > The fix was suggested by Paul Walmsley
> > 
> > Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
> > Cc: Paul Walmsley <paul@pwsan.com>
> 
> Thanks, I've added Nishanth's Tested-by: and fixed the patch changelog; 
> the following patch is now queued for 2.6.35-rc, unless there are any 
> further comments.

FYI, I'll also added this into omap-testing branch while we're waiting
for your clock fixes branch to be available.

Regards,

Tony