All of lore.kernel.org
 help / color / mirror / Atom feed
From: Amerigo Wang <amwang@redhat.com>
To: netdev@vger.kernel.org
Cc: herbert.xu@redhat.com, nhorman@redhat.com, sgruszka@redhat.com,
	Amerigo Wang <amwang@redhat.com>,
	davem@davemloft.net
Subject: [Patch 2/2] mlx4: add dynamic LRO disable support
Date: Wed, 2 Jun 2010 23:39:09 -0400	[thread overview]
Message-ID: <20100603034312.5305.61000.sendpatchset@localhost.localdomain> (raw)
In-Reply-To: <20100603034303.5305.55552.sendpatchset@localhost.localdomain>

This patch adds dynamic LRO diable support for mlx4 net driver.
It also fixes a bug of mlx4, which checks NETIF_F_LRO flag in rx
path without rtnl lock.

I don't have mlx4 card, so only did compiling test. Anyone who wants
to test this is more than welcome.

This is based on Neil's initial work too.

Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: Neil Horman <nhorman@redhat.com>
Acked-by: Neil Horman <nhorman@redhat.com>
Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com>


---
diff --git a/drivers/net/mlx4/en_ethtool.c b/drivers/net/mlx4/en_ethtool.c
index d5afd03..46cd049 100644
--- a/drivers/net/mlx4/en_ethtool.c
+++ b/drivers/net/mlx4/en_ethtool.c
@@ -387,6 +387,39 @@ static void mlx4_en_get_ringparam(struct net_device *dev,
 	param->tx_pending = mdev->profile.prof[priv->port].tx_ring_size;
 }
 
+static int mlx4_ethtool_op_set_flags(struct net_device *dev, u32 data)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	struct mlx4_en_dev *mdev = priv->mdev;
+	int rc = 0;
+	int changed = 0;
+	static int old_num_lro;
+
+	if (data & ETH_FLAG_LRO) {
+		if (!(dev->features & NETIF_F_LRO)) {
+			dev->features |= NETIF_F_LRO;
+			changed = 1;
+			mdev->profile.num_lro = old_num_lro;
+		}
+	} else if (dev->features & NETIF_F_LRO) {
+		dev->features &= ~NETIF_F_LRO;
+		changed = 1;
+		old_num_lro = mdev->profile.num_lro;
+		mdev->profile.num_lro = 0;
+	}
+
+	if (changed && netif_running(dev)) {
+		mutex_lock(&mdev->state_lock);
+		mlx4_en_stop_port(dev);
+		rc = mlx4_en_start_port(dev);
+		if (rc)
+			en_err(priv, "Failed to restart port\n");
+		mutex_unlock(&mdev->state_lock);
+	}
+
+	return rc;
+}
+
 const struct ethtool_ops mlx4_en_ethtool_ops = {
 	.get_drvinfo = mlx4_en_get_drvinfo,
 	.get_settings = mlx4_en_get_settings,
@@ -415,7 +448,7 @@ const struct ethtool_ops mlx4_en_ethtool_ops = {
 	.get_ringparam = mlx4_en_get_ringparam,
 	.set_ringparam = mlx4_en_set_ringparam,
 	.get_flags = ethtool_op_get_flags,
-	.set_flags = ethtool_op_set_flags,
+	.set_flags = mlx4_ethtool_op_set_flags,
 };
 
 
diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c
index 8e2fcb7..10f50ef 100644
--- a/drivers/net/mlx4/en_rx.c
+++ b/drivers/net/mlx4/en_rx.c
@@ -609,7 +609,7 @@ int mlx4_en_process_rx_cq(struct net_device *dev, struct mlx4_en_cq *cq, int bud
 				 * - without IP options
 				 * - not an IP fragment */
 				if (mlx4_en_can_lro(cqe->status) &&
-				    dev->features & NETIF_F_LRO) {
+				    priv->mdev->profile.num_lro) {
 
 					nr = mlx4_en_complete_rx_desc(
 						priv, rx_desc,

  reply	other threads:[~2010-06-03  3:39 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-06-03  3:38 [Patch 1/2] s2io: add dynamic LRO disable support Amerigo Wang
2010-06-03  3:39 ` Amerigo Wang [this message]
2010-06-03 12:37   ` [Patch 2/2] mlx4: " Ben Hutchings
2010-06-04  1:56     ` Cong Wang
2010-06-04 14:25       ` Ben Hutchings
2010-06-07  8:51         ` Cong Wang
2010-06-07 11:00           ` Stanislaw Gruszka
2010-06-07 13:15             ` Cong Wang
2010-06-09  9:23         ` Cong Wang
2010-06-09 10:49           ` Stanislaw Gruszka
2010-06-15  8:53             ` Cong Wang
2010-06-15  9:39               ` Stanislaw Gruszka
2010-06-17 10:54                 ` Cong Wang
2010-06-17 12:03                   ` Stanislaw Gruszka
2010-06-18  3:10                     ` Cong Wang
2010-06-03 13:38 ` [Patch 1/2] s2io: " Michal Schmidt
2010-06-05  8:53   ` Ramkrishna Vepa
2010-06-07  9:01     ` Cong Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100603034312.5305.61000.sendpatchset@localhost.localdomain \
    --to=amwang@redhat.com \
    --cc=davem@davemloft.net \
    --cc=herbert.xu@redhat.com \
    --cc=netdev@vger.kernel.org \
    --cc=nhorman@redhat.com \
    --cc=sgruszka@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.