All of lore.kernel.org
 help / color / mirror / Atom feed
From: Florian Fainelli <florian@openwrt.org>
To: "Lars-Peter Clausen" <lars@metafoo.de>
Cc: Ralf Baechle <ralf@linux-mips.org>,
	linux-mips@linux-mips.org, linux-kernel@vger.kernel.org
Subject: Re: [RFC][PATCH 01/26] MIPS: Add base support for Ingenic JZ4740 System-on-a-Chip
Date: Thu, 3 Jun 2010 16:27:31 +0200	[thread overview]
Message-ID: <201006031627.31308.florian@openwrt.org> (raw)
In-Reply-To: <1275505397-16758-2-git-send-email-lars@metafoo.de>

Hi Lars,

On Wednesday 02 June 2010 21:02:52 Lars-Peter Clausen wrote:
> This patch adds a new cpu type for the JZ4740 to the Linux MIPS
> architecture code. It also adds the iomem addresses for the different
> components found on a JZ4740 SoC.
> 
> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
> ---
[snip]

>  	 * MIPS64 class processors
> diff --git a/arch/mips/include/asm/mach-jz4740/base.h
> b/arch/mips/include/asm/mach-jz4740/base.h new file mode 100644
> index 0000000..cba3aae
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-jz4740/base.h
> @@ -0,0 +1,28 @@
> +#ifndef __ASM_MACH_JZ4740_BASE_H__
> +#define __ASM_MACH_JZ4740_BASE_H__
> +
> +#define JZ4740_CPM_BASE_ADDR	0xb0000000
> +#define JZ4740_INTC_BASE_ADDR	0xb0001000
> +#define JZ4740_TCU_BASE_ADDR	0xb0002000
> +#define JZ4740_WDT_BASE_ADDR	0xb0002000
> +#define JZ4740_RTC_BASE_ADDR	0xb0003000
> +#define JZ4740_GPIO_BASE_ADDR	0xb0010000
> +#define JZ4740_AIC_BASE_ADDR	0xb0020000
> +#define JZ4740_ICDC_BASE_ADDR	0xb0020000
> +#define JZ4740_MSC_BASE_ADDR	0xb0021000
> +#define JZ4740_UART0_BASE_ADDR	0xb0030000
> +#define JZ4740_UART1_BASE_ADDR	0xb0031000
> +#define JZ4740_I2C_BASE_ADDR	0xb0042000
> +#define JZ4740_SSI_BASE_ADDR	0xb0043000
> +#define JZ4740_SADC_BASE_ADDR	0xb0070000
> +#define JZ4740_EMC_BASE_ADDR	0xb3010000
> +#define JZ4740_DMAC_BASE_ADDR	0xb3020000
> +#define JZ4740_UHC_BASE_ADDR	0xb3030000
> +#define JZ4740_UDC_BASE_ADDR	0xb3040000
> +#define JZ4740_LCD_BASE_ADDR	0xb3050000
> +#define JZ4740_SLCD_BASE_ADDR	0xb3050000
> +#define JZ4740_CIM_BASE_ADDR	0xb3060000
> +#define JZ4740_IPU_BASE_ADDR	0xb3080000
> +#define JZ4740_ETH_BASE_ADDR	0xb3100000

Any reasons why you prefered virtual addresses here instead of physical ones?
You might also want to define a "true" base address and compute the registers
offset relatively to this base address for better clarity.

> +
> +#endif
> diff --git a/arch/mips/include/asm/mach-jz4740/war.h
> b/arch/mips/include/asm/mach-jz4740/war.h new file mode 100644
> index 0000000..3a5bc17
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-jz4740/war.h
> @@ -0,0 +1,25 @@
> +/*
> + * This file is subject to the terms and conditions of the GNU General
> Public + * License.  See the file "COPYING" in the main directory of this
> archive + * for more details.
> + *
> + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
> + */
> +#ifndef __ASM_MIPS_MACH_JZ4740_WAR_H
> +#define __ASM_MIPS_MACH_JZ4740_WAR_H
> +
> +#define R4600_V1_INDEX_ICACHEOP_WAR	0
> +#define R4600_V1_HIT_CACHEOP_WAR	0
> +#define R4600_V2_HIT_CACHEOP_WAR	0
> +#define R5432_CP0_INTERRUPT_WAR		0
> +#define BCM1250_M3_WAR			0
> +#define SIBYTE_1956_WAR			0
> +#define MIPS4K_ICACHE_REFILL_WAR	0
> +#define MIPS_CACHE_SYNC_WAR		0
> +#define TX49XX_ICACHE_INDEX_INV_WAR	0
> +#define RM9000_CDEX_SMP_WAR		0
> +#define ICACHE_REFILLS_WORKAROUND_WAR	0
> +#define R10000_LLSC_WAR			0
> +#define MIPS34K_MISSED_ITLB_WAR		0
> +
> +#endif /* __ASM_MIPS_MACH_JZ4740_WAR_H */
> diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
> index 3562b85..9b66331 100644
> --- a/arch/mips/kernel/cpu-probe.c
> +++ b/arch/mips/kernel/cpu-probe.c
> @@ -187,6 +187,7 @@ void __init check_wait(void)
>  	case CPU_BCM6358:
>  	case CPU_CAVIUM_OCTEON:
>  	case CPU_CAVIUM_OCTEON_PLUS:
> +	case CPU_JZRISC:
>  		cpu_wait = r4k_wait;
>  		break;
> 
> @@ -956,6 +957,22 @@ platform:
>  	}
>  }
> 
> +static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int
> cpu) +{
> +	decode_configs(c);
> +	/* JZRISC does not implement the CP0 counter. */
> +	c->options &= ~MIPS_CPU_COUNTER;
> +	switch (c->processor_id & 0xff00) {
> +	case PRID_IMP_JZRISC:
> +		c->cputype = CPU_JZRISC;
> +		__cpu_name[cpu] = "Ingenic JZRISC";
> +		break;
> +	default:
> +		panic("Unknown Ingenic Processor ID!");
> +		break;
> +	}
> +}
> +
>  const char *__cpu_name[NR_CPUS];
>  const char *__elf_platform;
> 
> @@ -994,6 +1011,9 @@ __cpuinit void cpu_probe(void)
>  	case PRID_COMP_CAVIUM:
>  		cpu_probe_cavium(c, cpu);
>  		break;
> +	case PRID_COMP_INGENIC:
> +		cpu_probe_ingenic(c, cpu);
> +		break;
>  	}
> 
>  	BUG_ON(!__cpu_name[cpu]);
> diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
> index 86f004d..4510e61 100644
> --- a/arch/mips/mm/tlbex.c
> +++ b/arch/mips/mm/tlbex.c
> @@ -409,6 +409,11 @@ static void __cpuinit build_tlb_write_entry(u32 **p,
> struct uasm_label **l, tlbw(p);
>  		break;
> 
> +	case CPU_JZRISC:
> +		tlbw(p);
> +		uasm_i_nop(p);
> +		break;
> +
>  	default:
>  		panic("No TLB refill handler yet (CPU type: %d)",
>  		      current_cpu_data.cputype);

  reply	other threads:[~2010-06-03 14:28 UTC|newest]

Thread overview: 97+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-06-02 19:02 [RFC][PATCH 00/26] *** SUBJECT HERE *** Lars-Peter Clausen
2010-06-02 19:02 ` [RFC][PATCH 01/26] MIPS: Add base support for Ingenic JZ4740 System-on-a-Chip Lars-Peter Clausen
2010-06-03 14:27   ` Florian Fainelli [this message]
2010-06-03 17:03     ` Lars-Peter Clausen
2010-06-02 19:02 ` [RFC][PATCH 02/26] MIPS: jz4740: Add IRQ handler code Lars-Peter Clausen
2010-06-03 14:29   ` Florian Fainelli
2010-06-02 19:02 ` [RFC][PATCH 03/26] MIPS: JZ4740: Add clock API support Lars-Peter Clausen
2010-06-02 22:45   ` Graham Gower
2010-06-03 17:20     ` Lars-Peter Clausen
2010-06-02 19:02 ` [RFC][PATCH 04/26] MIPS: JZ4740: Add timer support Lars-Peter Clausen
2010-06-02 19:02 ` [RFC][PATCH 05/26] MIPS: JZ4740: Add clocksource/clockevent support Lars-Peter Clausen
2010-06-02 19:02 ` [RFC][PATCH 06/26] MIPS: JZ4740: Add power-management and system reset support Lars-Peter Clausen
2010-06-02 19:02 ` [RFC][PATCH 07/26] MIPS: JZ4740: Add setup code Lars-Peter Clausen
2010-06-02 19:02 ` [RFC][PATCH 08/26] MIPS: JZ4740: Add gpio support Lars-Peter Clausen
2010-06-02 19:10 ` [RFC][PATCH 09/26] MIPS: JZ4740: Add DMA support Lars-Peter Clausen
2010-06-02 19:10 ` [RFC][PATCH 10/26] MIPS: JZ4740: Add PWM support Lars-Peter Clausen
2010-06-02 19:10 ` [RFC][PATCH 11/26] MIPS: JZ4740: Add serial support Lars-Peter Clausen
2010-06-02 19:10 ` [RFC][PATCH 12/26] MIPS: JZ4740: Add prom support Lars-Peter Clausen
2010-06-02 19:10 ` [RFC][PATCH 13/26] MIPS: JZ4740: Add platform devices Lars-Peter Clausen
2010-06-02 19:10 ` [RFC][PATCH 14/26] MIPS: JZ4740: Add Kbuild files Lars-Peter Clausen
2010-06-04  0:47   ` Ralf Baechle
2010-06-02 19:10 ` [RFC][PATCH 15/26] RTC: Add JZ4740 RTC driver Lars-Peter Clausen
2010-06-05 15:48   ` [rtc-linux] " Wan ZongShun
2010-06-05 17:26     ` Lars-Peter Clausen
2010-06-02 19:10 ` [RFC][PATCH 16/26] fbdev: Add JZ4740 framebuffer driver Lars-Peter Clausen
2010-06-02 19:10   ` Lars-Peter Clausen
2010-06-02 19:36   ` Andrew Morton
2010-06-02 19:36     ` Andrew Morton
2010-06-02 20:05     ` Lars-Peter Clausen
2010-06-02 20:05       ` Lars-Peter Clausen
2010-06-02 19:12 ` [RFC][PATCH 17/26] MTD: Nand: Add JZ4740 NAND driver Lars-Peter Clausen
2010-06-02 19:12   ` Lars-Peter Clausen
2010-06-13  9:40   ` Artem Bityutskiy
2010-06-13  9:40     ` Artem Bityutskiy
2010-06-02 19:12 ` [RFC][PATCH 18/26] MMC: Add JZ4740 mmc driver Lars-Peter Clausen
2010-06-02 19:12 ` [RFC][PATCH 19/26] USB: Add JZ4740 ohci support Lars-Peter Clausen
2010-06-02 19:12 ` [RFC][PATCH 20/26] alsa: ASoC: Add JZ4740 codec driver Lars-Peter Clausen
2010-06-02 19:12   ` Lars-Peter Clausen
2010-06-03  5:45   ` [alsa-devel] " Wan ZongShun
2010-06-03 12:03     ` Mark Brown
2010-06-03 12:03       ` [alsa-devel] " Mark Brown
2010-06-03 12:32   ` Liam Girdwood
2010-06-03 12:32     ` [alsa-devel] " Liam Girdwood
2010-06-03 12:50     ` Liam Girdwood
2010-06-03 12:50       ` [alsa-devel] " Liam Girdwood
2010-06-03 16:58     ` Lars-Peter Clausen
2010-06-03 16:58       ` [alsa-devel] " Lars-Peter Clausen
2010-06-03 17:49   ` Mark Brown
2010-06-03 17:49     ` Mark Brown
2010-06-03 23:57     ` Lars-Peter Clausen
2010-06-03 23:57       ` Lars-Peter Clausen
2010-06-03 23:59       ` Mark Brown
2010-06-03 23:59         ` Mark Brown
2010-06-02 19:12 ` [RFC][PATCH 21/26] alsa: ASoC: Add JZ4740 ASoC support Lars-Peter Clausen
2010-06-02 19:12   ` Lars-Peter Clausen
2010-06-03  3:36   ` Wan ZongShun
2010-06-03  3:36     ` [alsa-devel] " Wan ZongShun
2010-06-03 12:48   ` Liam Girdwood
2010-06-03 12:48     ` Liam Girdwood
2010-06-03 16:50     ` Lars-Peter Clausen
2010-06-03 16:50       ` Lars-Peter Clausen
2010-06-03 17:03       ` Liam Girdwood
2010-06-03 17:16         ` Lars-Peter Clausen
2010-06-03 17:16           ` Lars-Peter Clausen
2010-06-03 17:25           ` Liam Girdwood
2010-06-03 17:25             ` Liam Girdwood
2010-06-03 17:37             ` Lars-Peter Clausen
2010-06-03 17:37               ` Lars-Peter Clausen
2010-06-03 18:14             ` Troy Kisky
2010-06-03 18:14               ` [alsa-devel] " Troy Kisky
2010-06-03 18:14               ` Troy Kisky
2010-11-14 13:29               ` hi!!!! dkisky
2010-06-03 17:55   ` [RFC][PATCH 21/26] alsa: ASoC: Add JZ4740 ASoC support Mark Brown
2010-06-03 17:55     ` Mark Brown
2010-06-03 19:27     ` Lars-Peter Clausen
2010-06-02 19:12 ` [RFC][PATCH 22/26] hwmon: Add JZ4740 ADC driver Lars-Peter Clausen
2010-06-02 19:12   ` [lm-sensors] " Lars-Peter Clausen
2010-06-05 17:22   ` Jonathan Cameron
2010-06-05 17:22     ` [lm-sensors] " Jonathan Cameron
2010-06-05 19:08     ` Lars-Peter Clausen
2010-06-05 19:08       ` [lm-sensors] " Lars-Peter Clausen
2010-06-05 21:07       ` Jonathan Cameron
2010-06-05 21:07         ` Jonathan Cameron
2010-06-05 22:12         ` Lars-Peter Clausen
2010-06-05 22:12           ` Lars-Peter Clausen
2010-06-02 19:12 ` [RFC][PATCH 23/26] power: Add JZ4740 battery driver Lars-Peter Clausen
2010-06-14 15:51   ` Anton Vorontsov
2010-06-15 17:28     ` Lars-Peter Clausen
2010-06-15 17:34     ` Ralf Baechle
2010-06-16 12:20       ` Mark Brown
2010-06-19  3:48         ` Lars-Peter Clausen
2010-06-02 19:12 ` [RFC][PATCH 24/26] MIPS: JZ4740: Add qi_lb60 board support Lars-Peter Clausen
2010-06-02 19:15 ` [RFC][PATCH 25/26] MIPS: Add defconfig for the qi_lb60 board Lars-Peter Clausen
2010-06-02 19:15 ` [RFC][PATCH 26/26] alsa: ASoC: JZ4740: Add qi_lb60 board driver Lars-Peter Clausen
2010-06-02 19:15   ` Lars-Peter Clausen
2010-06-03 17:57   ` Mark Brown
2010-06-03 17:57     ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201006031627.31308.florian@openwrt.org \
    --to=florian@openwrt.org \
    --cc=lars@metafoo.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@linux-mips.org \
    --cc=ralf@linux-mips.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.