From: Bruno Randolf <br1@einfach.org>
To: linville@tuxdriver.com
Cc: ath5k-devel@lists.ath5k.org, linux-wireless@vger.kernel.org
Subject: [PATCH 3/5] ath5k: new function for setting the antenna switch table
Date: Mon, 07 Jun 2010 13:11:30 +0900 [thread overview]
Message-ID: <20100607041130.18667.37656.stgit@tt-desk> (raw)
In-Reply-To: <20100607041012.18667.6859.stgit@tt-desk>
Collect all pieces concering the antenna switch table into one function.
Previously it was split up between ath5k_hw_reset() and
ath5k_hw_commit_eeprom_settings().
Also we need to set the antenna switch table when ath5k_hw_set_antenna_mode()
is called manually (by "iw phy0 antenna set", for example).
I'm not sure if we need to set the switchtable at the same place in
ath5k_hw_reset() as it was before - it is set later thru
ath5k_hw_set_antenna_mode() anyways - but i leave it there to avoid
problems(?).
Plus print switchtable registers in the debugfs file.
Signed-off-by: Bruno Randolf <br1@einfach.org>
---
drivers/net/wireless/ath/ath5k/ath5k.h | 1 +
drivers/net/wireless/ath/ath5k/debug.c | 7 +++++++
drivers/net/wireless/ath/ath5k/phy.c | 32 +++++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath5k/reset.c | 33 ++++++--------------------------
4 files changed, 46 insertions(+), 27 deletions(-)
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index eace74d..cf16318 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -1286,6 +1286,7 @@ u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan);
int ath5k_hw_phy_disable(struct ath5k_hw *ah);
/* Antenna control */
void ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode);
+void ath5k_hw_set_antenna_switch(struct ath5k_hw *ah, u8 ee_mode);
/* TX power setup */
int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
u8 ee_mode, u8 txpower);
diff --git a/drivers/net/wireless/ath/ath5k/debug.c b/drivers/net/wireless/ath/ath5k/debug.c
index c58503c..41817a2 100644
--- a/drivers/net/wireless/ath/ath5k/debug.c
+++ b/drivers/net/wireless/ath/ath5k/debug.c
@@ -425,6 +425,13 @@ static ssize_t read_file_antenna(struct file *file, char __user *user_buf,
"AR5K_PHY_FAST_ANT_DIV_EN\t%d\n",
(v & AR5K_PHY_FAST_ANT_DIV_EN) != 0);
+ v = ath5k_hw_reg_read(sc->ah, AR5K_PHY_ANT_SWITCH_TABLE_0);
+ len += snprintf(buf+len, sizeof(buf)-len,
+ "\nAR5K_PHY_ANT_SWITCH_TABLE_0\t0x%08x\n", v);
+ v = ath5k_hw_reg_read(sc->ah, AR5K_PHY_ANT_SWITCH_TABLE_1);
+ len += snprintf(buf+len, sizeof(buf)-len,
+ "AR5K_PHY_ANT_SWITCH_TABLE_1\t0x%08x\n", v);
+
return simple_read_from_buffer(user_buf, count, ppos, buf, len);
}
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index 0f3b9be..73c4fcd 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -1781,6 +1781,37 @@ ath5k_hw_set_fast_div(struct ath5k_hw *ah, u8 ee_mode, bool enable)
}
}
+void
+ath5k_hw_set_antenna_switch(struct ath5k_hw *ah, u8 ee_mode)
+{
+ u8 ant0, ant1;
+
+ /*
+ * In case a fixed antenna was set as default
+ * use the same switch table twice.
+ */
+ if (ah->ah_ant_mode == AR5K_ANTMODE_FIXED_A)
+ ant0 = ant1 = AR5K_ANT_SWTABLE_A;
+ else if (ah->ah_ant_mode == AR5K_ANTMODE_FIXED_B)
+ ant0 = ant1 = AR5K_ANT_SWTABLE_B;
+ else {
+ ant0 = AR5K_ANT_SWTABLE_A;
+ ant1 = AR5K_ANT_SWTABLE_B;
+ }
+
+ /* Set antenna idle switch table */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_ANT_CTL,
+ AR5K_PHY_ANT_CTL_SWTABLE_IDLE,
+ (ah->ah_ant_ctl[ee_mode][AR5K_ANT_CTL] |
+ AR5K_PHY_ANT_CTL_TXRX_EN));
+
+ /* Set antenna switch tables */
+ ath5k_hw_reg_write(ah, ah->ah_ant_ctl[ee_mode][ant0],
+ AR5K_PHY_ANT_SWITCH_TABLE_0);
+ ath5k_hw_reg_write(ah, ah->ah_ant_ctl[ee_mode][ant1],
+ AR5K_PHY_ANT_SWITCH_TABLE_1);
+}
+
/*
* Set antenna operating mode
*/
@@ -1900,6 +1931,7 @@ ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode)
if (sta_id1)
AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, sta_id1);
+ ath5k_hw_set_antenna_switch(ah, ee_mode);
/* Note: set diversity before default antenna
* because it won't work correctly */
ath5k_hw_set_fast_div(ah, ee_mode, fast_div);
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index c17c84e..d561f7c 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -729,7 +729,7 @@ static void ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah,
}
static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah,
- struct ieee80211_channel *channel, u8 *ant, u8 ee_mode)
+ struct ieee80211_channel *channel, u8 ee_mode)
{
struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
s16 cck_ofdm_pwr_delta;
@@ -763,17 +763,9 @@ static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah,
ee->ee_cck_ofdm_gain_delta;
}
- /* Set antenna idle switch table */
- AR5K_REG_WRITE_BITS(ah, AR5K_PHY_ANT_CTL,
- AR5K_PHY_ANT_CTL_SWTABLE_IDLE,
- (ah->ah_ant_ctl[ee_mode][0] |
- AR5K_PHY_ANT_CTL_TXRX_EN));
-
- /* Set antenna switch tables */
- ath5k_hw_reg_write(ah, ah->ah_ant_ctl[ee_mode][ant[0]],
- AR5K_PHY_ANT_SWITCH_TABLE_0);
- ath5k_hw_reg_write(ah, ah->ah_ant_ctl[ee_mode][ant[1]],
- AR5K_PHY_ANT_SWITCH_TABLE_1);
+ /* XXX: necessary here? is called from ath5k_hw_set_antenna_mode()
+ * too */
+ ath5k_hw_set_antenna_switch(ah, ee_mode);
/* Noise floor threshold */
ath5k_hw_reg_write(ah,
@@ -887,7 +879,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
struct ath_common *common = ath5k_hw_common(ah);
u32 s_seq[10], s_ant, s_led[3], staid1_flags, tsf_up, tsf_lo;
u32 phy_tst1;
- u8 mode, freq, ee_mode, ant[2];
+ u8 mode, freq, ee_mode;
int i, ret;
s_ant = 0;
@@ -1110,21 +1102,8 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
AR5K_TXCFG_B_MODE);
}
- /*
- * In case a fixed antenna was set as default
- * use the same switch table twice.
- */
- if (ah->ah_ant_mode == AR5K_ANTMODE_FIXED_A)
- ant[0] = ant[1] = AR5K_ANT_SWTABLE_A;
- else if (ah->ah_ant_mode == AR5K_ANTMODE_FIXED_B)
- ant[0] = ant[1] = AR5K_ANT_SWTABLE_B;
- else {
- ant[0] = AR5K_ANT_SWTABLE_A;
- ant[1] = AR5K_ANT_SWTABLE_B;
- }
-
/* Commit values from EEPROM */
- ath5k_hw_commit_eeprom_settings(ah, channel, ant, ee_mode);
+ ath5k_hw_commit_eeprom_settings(ah, channel, ee_mode);
} else {
/*
next prev parent reply other threads:[~2010-06-07 4:11 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-07 4:11 [PATCH 0/5] Series short description Bruno Randolf
2010-06-07 4:11 ` [PATCH 1/5] ath5k: fix NULL pointer in antenna configuration Bruno Randolf
2010-06-07 4:11 ` [PATCH 2/5] ath5k: update AR5K_PHY_RESTART_DIV_GC values to match masks Bruno Randolf
2010-06-07 4:11 ` Bruno Randolf [this message]
2010-06-07 4:11 ` [PATCH 4/5] ath5k: no need to save/restore the default antenna Bruno Randolf
2010-06-07 4:11 ` [PATCH 5/5] ath5k: add debugfs file for queue debugging Bruno Randolf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100607041130.18667.37656.stgit@tt-desk \
--to=br1@einfach.org \
--cc=ath5k-devel@lists.ath5k.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.