All of lore.kernel.org
 help / color / mirror / Atom feed
From: cbouatmailru@gmail.com (Anton Vorontsov)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/4] ARM: cns3xxx: Add support for AHCI controllers
Date: Tue, 8 Jun 2010 21:02:17 +0400	[thread overview]
Message-ID: <20100608170217.GD22516@oksana.dev.rtsoft.ru> (raw)
In-Reply-To: <20100608170030.GA26992@oksana.dev.rtsoft.ru>

CNS3xxx chips have AHCI-compatible SATA controller. This patch adds
the support using generic ahci_platform driver.

Signed-off-by: Anton Vorontsov <avorontsov@mvista.com>
---
 arch/arm/mach-cns3xxx/cns3420vb.c |    1 +
 arch/arm/mach-cns3xxx/devices.c   |   52 +++++++++++++++++++++++++++++++++++++
 arch/arm/mach-cns3xxx/devices.h   |    1 +
 3 files changed, 54 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
index 04ae1ce..9df8391 100644
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
@@ -118,6 +118,7 @@ static void __init cns3420_init(void)
 {
 	platform_add_devices(cns3420_pdevs, ARRAY_SIZE(cns3420_pdevs));
 
+	cns3xxx_ahci_init();
 	cns3xxx_sdhci_init();
 
 	pm_power_off = cns3xxx_power_off;
diff --git a/arch/arm/mach-cns3xxx/devices.c b/arch/arm/mach-cns3xxx/devices.c
index b01a301..50b4d31 100644
--- a/arch/arm/mach-cns3xxx/devices.c
+++ b/arch/arm/mach-cns3xxx/devices.c
@@ -14,6 +14,7 @@
 #include <linux/io.h>
 #include <linux/init.h>
 #include <linux/compiler.h>
+#include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <mach/cns3xxx.h>
 #include <mach/irqs.h>
@@ -21,6 +22,57 @@
 #include "devices.h"
 
 /*
+ * AHCI
+ */
+static struct resource cns3xxx_ahci_resource[] = {
+	[0] = {
+		.start	= CNS3XXX_SATA2_BASE,
+		.end	= CNS3XXX_SATA2_BASE + CNS3XXX_SATA2_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_CNS3XXX_SATA,
+		.end	= IRQ_CNS3XXX_SATA,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 cns3xxx_ahci_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device cns3xxx_ahci_pdev = {
+	.name		= "ahci",
+	.id		= 0,
+	.resource	= cns3xxx_ahci_resource,
+	.num_resources	= ARRAY_SIZE(cns3xxx_ahci_resource),
+	.dev		= {
+		.dma_mask		= &cns3xxx_ahci_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+void __init cns3xxx_ahci_init(void)
+{
+	u32 tmp;
+
+	tmp = __raw_readl(MISC_SATA_POWER_MODE);
+	tmp |= 0x1 << 16; /* Disable SATA PHY 0 from SLUMBER Mode */
+	tmp |= 0x1 << 17; /* Disable SATA PHY 1 from SLUMBER Mode */
+	__raw_writel(tmp, MISC_SATA_POWER_MODE);
+
+	/* Enable SATA PHY */
+	cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY0);
+	cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY1);
+
+	/* Enable SATA Clock */
+	cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_SATA);
+
+	/* De-Asscer SATA Reset */
+	cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SATA));
+
+	platform_device_register(&cns3xxx_ahci_pdev);
+}
+
+/*
  * SDHCI
  */
 static struct resource cns3xxx_sdhci_resources[] = {
diff --git a/arch/arm/mach-cns3xxx/devices.h b/arch/arm/mach-cns3xxx/devices.h
index 0735a45..27e15a1 100644
--- a/arch/arm/mach-cns3xxx/devices.h
+++ b/arch/arm/mach-cns3xxx/devices.h
@@ -14,6 +14,7 @@
 #ifndef __CNS3XXX_DEVICES_H_
 #define __CNS3XXX_DEVICES_H_
 
+void __init cns3xxx_ahci_init(void);
 void __init cns3xxx_sdhci_init(void);
 
 #endif /* __CNS3XXX_DEVICES_H_ */
-- 
1.7.0.5

  parent reply	other threads:[~2010-06-08 17:02 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-06-08 17:00 [GIT PULL v2] Some Cavium CNS3xxx updates for 2.6.36 Anton Vorontsov
2010-06-08 17:01 ` [PATCH 1/4] ARM: cns3xxx: Use IO memory accessors everywhere Anton Vorontsov
2010-06-08 17:01 ` [PATCH 2/4] ARM: cns3xxx: Add support for PCI Express ports Anton Vorontsov
2010-06-08 17:01 ` [PATCH 3/4] ARM: cns3xxx: Add support for SDHCI controllers Anton Vorontsov
2010-06-08 17:02 ` Anton Vorontsov [this message]
2010-06-30 21:11 ` [GIT PULL v2] Some Cavium CNS3xxx updates for 2.6.36 Anton Vorontsov
2010-07-22 14:56   ` Anton Vorontsov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100608170217.GD22516@oksana.dev.rtsoft.ru \
    --to=cbouatmailru@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.