All of lore.kernel.org
 help / color / mirror / Atom feed
From: Luiz Capitulino <lcapitulino@redhat.com>
To: "Daniel P. Berrange" <berrange@redhat.com>
Cc: qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH 08/19] Convert RTC to use enumerations for configuration parameters
Date: Wed, 9 Jun 2010 16:54:36 -0300	[thread overview]
Message-ID: <20100609165436.2982292c@redhat.com> (raw)
In-Reply-To: <1275921752-29420-9-git-send-email-berrange@redhat.com>

On Mon,  7 Jun 2010 15:42:21 +0100
"Daniel P. Berrange" <berrange@redhat.com> wrote:

> Convert the rtc clock and driftfix parameters to use enums for
> configuration. This ensures strict validation at time of config
> parsing.
> 
> Also fixes a bug in qemu-config.c where 'driftfix' was never
> enabled because this is a target independant compliation unit,
> thus cannot include config-target.h and thus never has the
> TARGET_I386 symbol defined.
> 
> Ideally the 'base' parameter would be an enum too, but this
> value is overloaded to also accept a pretty-printed start
> date.
> 
> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
> ---
>  hw/mc146818rtc.c |    8 ++++----
>  qemu-config.c    |   27 +++++++++++++++++++++++----
>  sysemu.h         |   20 +++++++++++++++++++-
>  vl.c             |   34 ++++++++++------------------------
>  4 files changed, 56 insertions(+), 33 deletions(-)
> 
> diff --git a/hw/mc146818rtc.c b/hw/mc146818rtc.c
> index c3e6a70..cbb072c 100644
> --- a/hw/mc146818rtc.c
> +++ b/hw/mc146818rtc.c
> @@ -202,7 +202,7 @@ static void rtc_periodic_timer(void *opaque)
>      if (s->cmos_data[RTC_REG_B] & REG_B_PIE) {
>          s->cmos_data[RTC_REG_C] |= 0xc0;
>  #ifdef TARGET_I386
> -        if(rtc_td_hack) {
> +        if(rtc_driftfix == QEMU_RTC_DRIFTFIX_SLEW) {
>              if (s->irq_reinject_on_ack_count >= RTC_REINJECT_ON_ACK_COUNT)
>                  s->irq_reinject_on_ack_count = 0;		
>              apic_reset_irq_delivered();
> @@ -552,7 +552,7 @@ static int rtc_post_load(void *opaque, int version_id)
>      RTCState *s = opaque;
>  
>      if (version_id >= 2) {
> -        if (rtc_td_hack) {
> +        if (rtc_driftfix == QEMU_RTC_DRIFTFIX_SLEW) {
>              rtc_coalesced_timer_update(s);
>          }
>      }
> @@ -597,7 +597,7 @@ static void rtc_reset(void *opaque)
>      qemu_irq_lower(s->irq);
>  
>  #ifdef TARGET_I386
> -    if (rtc_td_hack)
> +    if (rtc_driftfix == QEMU_RTC_DRIFTFIX_SLEW)
>  	    s->irq_coalesced = 0;
>  #endif
>  }
> @@ -619,7 +619,7 @@ static int rtc_initfn(ISADevice *dev)
>  
>      s->periodic_timer = qemu_new_timer(rtc_clock, rtc_periodic_timer, s);
>  #ifdef TARGET_I386
> -    if (rtc_td_hack)
> +    if (rtc_driftfix == QEMU_RTC_DRIFTFIX_SLEW)
>          s->coalesced_timer =
>              qemu_new_timer(rtc_clock, rtc_coalesced_timer, s);
>  #endif
> diff --git a/qemu-config.c b/qemu-config.c
> index f656e6b..75cddc1 100644
> --- a/qemu-config.c
> +++ b/qemu-config.c
> @@ -288,6 +288,11 @@ QemuOptsList qemu_net_opts = {
>      },
>  };
>  
> +QEMU_ENUM_IMPL(qemu_rtc_clock, QEMU_RTC_CLOCK_LAST,
> +	       "host", "guest");
> +QEMU_ENUM_IMPL(qemu_rtc_driftfix, QEMU_RTC_DRIFTFIX_LAST,
> +	       "none", "slew");
> +
>  QemuOptsList qemu_rtc_opts = {
>      .name = "rtc",
>      .head = QTAILQ_HEAD_INITIALIZER(qemu_rtc_opts.head),
> @@ -297,12 +302,26 @@ QemuOptsList qemu_rtc_opts = {
>              .type = QEMU_OPT_STRING,
>          },{
>              .name = "clock",
> -            .type = QEMU_OPT_STRING,
> -#ifdef TARGET_I386
> +            .type = QEMU_OPT_ENUM,
> +            .validate = {
> +                .optEnum = {
> +                    .to_string = qemu_rtc_clock_to_string,
> +                    .to_string_list = qemu_rtc_clock_to_string_list,
> +                    .from_string = qemu_rtc_clock_from_string,
> +                    .last = QEMU_RTC_CLOCK_LAST,
> +                },
> +            },
>          },{
>              .name = "driftfix",
> -            .type = QEMU_OPT_STRING,
> -#endif
> +            .type = QEMU_OPT_ENUM,
> +            .validate = {
> +                .optEnum = {
> +                    .to_string = qemu_rtc_driftfix_to_string,
> +                    .to_string_list = qemu_rtc_driftfix_to_string_list,
> +                    .from_string = qemu_rtc_driftfix_from_string,
> +                    .last = QEMU_RTC_DRIFTFIX_LAST,
> +                },
> +            },
>          },
>          { /* end if list */ }
>      },
> diff --git a/sysemu.h b/sysemu.h
> index f0c5eb8..4d39566 100644
> --- a/sysemu.h
> +++ b/sysemu.h
> @@ -120,7 +120,6 @@ extern uint8_t irq0override;
>  extern DisplayType display_type;
>  extern const char *keyboard_layout;
>  extern int win2k_install_hack;
> -extern int rtc_td_hack;
>  extern int alt_grab;
>  extern int ctrl_grab;
>  extern int usb_enabled;
> @@ -133,7 +132,26 @@ extern int no_shutdown;
>  extern int semihosting_enabled;
>  extern int old_param;
>  extern int boot_menu;
> +
>  extern QEMUClock *rtc_clock;
> +extern int rtc_driftfix;
> +
> +enum {
> +    QEMU_RTC_CLOCK_HOST,
> +    QEMU_RTC_CLOCK_GUEST,
> +
> +    QEMU_RTC_CLOCK_LAST
> +};
> +QEMU_ENUM_DECL(qemu_rtc_clock);
> +
> +enum {
> +    QEMU_RTC_DRIFTFIX_NONE,
> +    QEMU_RTC_DRIFTFIX_SLEW,
> +
> +    QEMU_RTC_DRIFTFIX_LAST
> +};
> +QEMU_ENUM_DECL(qemu_rtc_driftfix);
> +
>  
>  #define MAX_NODES 64
>  extern int nb_numa_nodes;
> diff --git a/vl.c b/vl.c
> index 16491c4..0b38d62 100644
> --- a/vl.c
> +++ b/vl.c
> @@ -201,7 +201,7 @@ CharDriverState *serial_hds[MAX_SERIAL_PORTS];
>  CharDriverState *parallel_hds[MAX_PARALLEL_PORTS];
>  CharDriverState *virtcon_hds[MAX_VIRTIO_CONSOLES];
>  int win2k_install_hack = 0;
> -int rtc_td_hack = 0;
> +int rtc_driftfix = QEMU_RTC_DRIFTFIX_NONE;
>  int usb_enabled = 0;
>  int singlestep = 0;
>  int smp_cpus = 1;
> @@ -418,6 +418,9 @@ static void configure_rtc_date_offset(const char *startdate, int legacy)
>  static void configure_rtc(QemuOpts *opts)
>  {
>      const char *value;
> +    QEMUClock *clocks[] = { host_clock, vm_clock };
> +    verify_true(ARRAY_SIZE(clocks) == QEMU_RTC_CLOCK_LAST);

 This and the other verify_true() usage are generating the following
build error for me when debug is enabled:

cc1: warnings being treated as errors
/home/lcapitulino/src/qmp-unstable/vl.c: In function ‘configure_rtc’:
/home/lcapitulino/src/qmp-unstable/vl.c:422: error: statement with no effect
/home/lcapitulino/src/qmp-unstable/vl.c: In function ‘drive_init’:
/home/lcapitulino/src/qmp-unstable/vl.c:847: error: statement with no effect
make[1]: *** [vl.o] Error 1
make: *** [subdir-libhw64] Error 2


> +    int clock;
>  
>      value = qemu_opt_get(opts, "base");
>      if (value) {
> @@ -429,28 +432,11 @@ static void configure_rtc(QemuOpts *opts)
>              configure_rtc_date_offset(value, 0);
>          }
>      }
> -    value = qemu_opt_get(opts, "clock");
> -    if (value) {
> -        if (!strcmp(value, "host")) {
> -            rtc_clock = host_clock;
> -        } else if (!strcmp(value, "vm")) {
> -            rtc_clock = vm_clock;
> -        } else {
> -            fprintf(stderr, "qemu: invalid option value '%s'\n", value);
> -            exit(1);
> -        }
> -    }
> -    value = qemu_opt_get(opts, "driftfix");
> -    if (value) {
> -        if (!strcmp(value, "slew")) {
> -            rtc_td_hack = 1;
> -        } else if (!strcmp(value, "none")) {
> -            rtc_td_hack = 0;
> -        } else {
> -            fprintf(stderr, "qemu: invalid option value '%s'\n", value);
> -            exit(1);
> -        }
> -    }
> +
> +    clock = qemu_opt_get_enum(opts, "clock", QEMU_RTC_CLOCK_HOST);
> +    rtc_clock = clocks[clock];
> +
> +    rtc_driftfix = qemu_opt_get_enum(opts, "driftfix", QEMU_RTC_DRIFTFIX_NONE);
>  }
>  
>  /***********************************************************/
> @@ -3149,7 +3135,7 @@ int main(int argc, char **argv, char **envp)
>                  win2k_install_hack = 1;
>                  break;
>              case QEMU_OPTION_rtc_td_hack:
> -                rtc_td_hack = 1;
> +                rtc_driftfix = QEMU_RTC_DRIFTFIX_SLEW;
>                  break;
>              case QEMU_OPTION_acpitable:
>                  do_acpitable_option(optarg);

  reply	other threads:[~2010-06-09 19:54 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-06-07 14:42 [Qemu-devel] [PATCH 00/19] RFC: Reporting QEMU binary capabilities Daniel P. Berrange
2010-06-07 14:42 ` [Qemu-devel] [PATCH 01/19] Add support for JSON pretty printing Daniel P. Berrange
2010-06-09 19:51   ` Luiz Capitulino
2010-06-07 14:42 ` [Qemu-devel] [PATCH 02/19] Add support for compile time assertions Daniel P. Berrange
2010-06-07 15:35   ` [Qemu-devel] " Paolo Bonzini
2010-06-07 14:42 ` [Qemu-devel] [PATCH 03/19] Add enum handlers for easy & efficient string <-> int conversion Daniel P. Berrange
2010-06-09 19:52   ` Luiz Capitulino
2010-06-26  6:52   ` Markus Armbruster
2010-06-07 14:42 ` [Qemu-devel] [PATCH 04/19] Add support for a option parameter as an enum Daniel P. Berrange
2010-06-26  6:59   ` Markus Armbruster
2010-06-07 14:42 ` [Qemu-devel] [PATCH 05/19] Ensure that QEMU exits if drive_add parsing fails Daniel P. Berrange
2010-06-26  7:04   ` Markus Armbruster
2010-06-07 14:42 ` [Qemu-devel] [PATCH 06/19] Convert drive options to use enumeration data type Daniel P. Berrange
2010-06-09 19:52   ` Luiz Capitulino
2010-06-26  7:07   ` Markus Armbruster
2010-06-07 14:42 ` [Qemu-devel] [PATCH 07/19] Convert netdev client types to use an enumeration Daniel P. Berrange
2010-06-07 15:09   ` Anthony Liguori
2010-06-07 15:13     ` Daniel P. Berrange
2010-06-07 14:42 ` [Qemu-devel] [PATCH 08/19] Convert RTC to use enumerations for configuration parameters Daniel P. Berrange
2010-06-09 19:54   ` Luiz Capitulino [this message]
2010-06-07 14:42 ` [Qemu-devel] [PATCH 09/19] Change 'query-version' to output broken down version string Daniel P. Berrange
2010-06-07 15:11   ` Anthony Liguori
2010-06-09 20:04     ` Luiz Capitulino
2010-06-07 14:42 ` [Qemu-devel] [PATCH 10/19] Add a query-machines command to QMP Daniel P. Berrange
2010-06-07 15:13   ` Anthony Liguori
2010-06-07 16:44     ` Daniel P. Berrange
2010-06-07 17:07       ` Anthony Liguori
2010-06-07 17:14         ` Daniel P. Berrange
2010-06-09 20:06         ` Luiz Capitulino
2010-06-07 14:42 ` [Qemu-devel] [PATCH 11/19] Add a query-devices " Daniel P. Berrange
2010-06-07 15:14   ` Anthony Liguori
2010-06-07 16:03     ` Daniel P. Berrange
2010-06-26  7:12       ` Markus Armbruster
2010-06-07 14:42 ` [Qemu-devel] [PATCH 12/19] Add a query-cputypes " Daniel P. Berrange
2010-06-26  7:18   ` Markus Armbruster
2010-06-07 14:42 ` [Qemu-devel] [PATCH 13/19] Add a query-target " Daniel P. Berrange
2010-06-07 15:43   ` [Qemu-devel] " Paolo Bonzini
2010-06-07 14:42 ` [Qemu-devel] [PATCH 14/19] Add a query-argv " Daniel P. Berrange
2010-06-07 15:01   ` Anthony Liguori
2010-06-10 15:34     ` [Qemu-devel] " Paolo Bonzini
2010-06-26  7:30     ` [Qemu-devel] " Markus Armbruster
2010-06-07 14:42 ` [Qemu-devel] [PATCH 15/19] Expand query-argv to include help string Daniel P. Berrange
2010-06-07 14:42 ` [Qemu-devel] [PATCH 16/19] Add a query-netdev command to QMP Daniel P. Berrange
2010-06-07 15:15   ` Anthony Liguori
2010-06-26  7:32     ` Markus Armbruster
2010-06-07 19:13   ` Miguel Di Ciurcio Filho
2010-06-08  8:38     ` Daniel P. Berrange
2010-06-07 14:42 ` [Qemu-devel] [PATCH 17/19] Add a query-config " Daniel P. Berrange
2010-06-26  7:34   ` Markus Armbruster
2010-06-07 14:42 ` [Qemu-devel] [PATCH 18/19] Add option to turn on JSON pretty printing in monitor Daniel P. Berrange
2010-06-07 14:42 ` [Qemu-devel] [PATCH 19/19] Add a -capabilities argument to allow easy query for static QEMU info Daniel P. Berrange
2010-06-07 16:04   ` [Qemu-devel] " Paolo Bonzini
2010-06-07 16:09     ` Daniel P. Berrange
2010-06-07 16:04   ` [Qemu-devel] " Anthony Liguori
2010-06-07 14:58 ` [Qemu-devel] [PATCH 00/19] RFC: Reporting QEMU binary capabilities Anthony Liguori
2010-06-07 15:10   ` Daniel P. Berrange
2010-06-07 15:18     ` Anthony Liguori
2010-06-07 16:02   ` [Qemu-devel] " Paolo Bonzini
2010-06-07 16:03     ` Anthony Liguori
2010-06-07 16:07 ` [Qemu-devel] " Anthony Liguori
2010-06-09 20:25   ` Luiz Capitulino
2010-06-26  6:45 ` Markus Armbruster

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100609165436.2982292c@redhat.com \
    --to=lcapitulino@redhat.com \
    --cc=berrange@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.