[PATCH 2/2] mach-cpuimx27: fix USB_ULPI build warnings

[s.hauer@pengutronix.de (Sascha Hauer)]

On Fri, Jun 18, 2010 at 04:19:55PM +0200, Eric B?nard wrote:
> when CONFIG_USB_ULPI is not defined we actually get :
> warning: 'otg_pdata' defined but not used
> warning: 'usbh2_pdata' defined but not used

Ok, applied.

> 
> Signed-off-by: Eric B?nard <eric@eukrea.com>
> Cc: linux-arm-kernel at lists.infradead.org
> Cc: s.hauer at pengutronix.de
> ---
>  arch/arm/mach-mx2/mach-cpuimx27.c |    2 ++
>  1 files changed, 2 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-mx2/mach-cpuimx27.c b/arch/arm/mach-mx2/mach-cpuimx27.c
> index dc2dca3..5529178 100644
> --- a/arch/arm/mach-mx2/mach-cpuimx27.c
> +++ b/arch/arm/mach-mx2/mach-cpuimx27.c
> @@ -219,6 +219,7 @@ static struct platform_device serial_device = {
>  };
>  #endif
>  
> +#if defined(CONFIG_USB_ULPI)
>  static struct mxc_usbh_platform_data otg_pdata = {
>  	.portsc	= MXC_EHCI_MODE_ULPI,
>  	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
> @@ -228,6 +229,7 @@ static struct mxc_usbh_platform_data usbh2_pdata = {
>  	.portsc	= MXC_EHCI_MODE_ULPI,
>  	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
>  };
> +#endif
>  
>  static struct fsl_usb2_platform_data otg_device_pdata = {
>  	.operating_mode = FSL_USB2_DR_DEVICE,
> -- 
> 1.6.3.3
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |