From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mike Frysinger Date: Mon, 21 Jun 2010 13:25:25 -0400 Subject: [U-Boot] [PATCH v2] AX88180: use standard I/O accessors In-Reply-To: <4C1EFBA2.1080201@gmail.com> References: <1273560207-8151-1-git-send-email-vapier@gentoo.org> <1275527030-22206-1-git-send-email-vapier@gentoo.org> <4C1EFBA2.1080201@gmail.com> Message-ID: <201006211325.25981.vapier@gentoo.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Monday, June 21, 2010 01:41:54 Ben Warren wrote: > On 6/2/2010 6:03 PM, Mike Frysinger wrote: > > The current dm9000x driver accesses its memory mapped registers directly > > instead of using the standard I/O accessors. This can cause problems on > > Blackfin systems as the accesses can get out of order. So convert the > > direct volatile dereferences to use the normal in/out macros. > > > > Signed-off-by: Mike Frysinger > > Tested-by: Hoan Hoang > > --- > > I can't get this to apply. Please rebase against TOT. you need the first two in the series: Applying: AX88180: add support for the Marvell 88E1118 phy Applying: AX88180: make OUTW handle 32bit/16bit defines too -mike -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: This is a digitally signed message part. Url : http://lists.denx.de/pipermail/u-boot/attachments/20100621/d1d87a54/attachment.pgp