From: Anton Vorontsov <avorontsov@mvista.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: "Ben Dooks" <ben@simtec.co.uk>,
"Richard Röjfors" <richard.rojfors@pelagicore.com>,
linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 3/3] sdhci-pltfm: Add support for CNS3xxx SoC devices
Date: Fri, 25 Jun 2010 22:06:44 +0400 [thread overview]
Message-ID: <20100625180644.GC18241@oksana.dev.rtsoft.ru> (raw)
In-Reply-To: <20100625180527.GA11280@oksana.dev.rtsoft.ru>
There's nothing special, just SoC-specific ops and quirks.
Signed-off-by: Anton Vorontsov <avorontsov@mvista.com>
---
drivers/mmc/host/Kconfig | 9 ++++
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/sdhci-cns3xxx.c | 97 ++++++++++++++++++++++++++++++++++++++
drivers/mmc/host/sdhci-pltfm.c | 3 +
drivers/mmc/host/sdhci-pltfm.h | 4 ++
5 files changed, 114 insertions(+), 0 deletions(-)
create mode 100644 drivers/mmc/host/sdhci-cns3xxx.c
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index e171e77..d40e39b 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -121,6 +121,15 @@ config MMC_SDHCI_PLTFM
If unsure, say N.
+config MMC_SDHCI_CNS3XXX
+ bool "SDHCI support on the Cavium Networks CNS3xxx SoC"
+ depends on ARCH_CNS3XXX
+ depends on MMC_SDHCI_PLTFM
+ help
+ This selects the SDHCI support for CNS3xxx System-on-Chip devices.
+
+ If unsure, say N.
+
config MMC_SDHCI_S3C
tristate "SDHCI support on Samsung S3C SoC"
depends on MMC_SDHCI && (PLAT_S3C24XX || PLAT_S3C64XX)
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 28622d5..070c5f3 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -38,6 +38,7 @@ obj-$(CONFIG_MMC_SH_MMCIF) += sh_mmcif.o
obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-platform.o
sdhci-platform-y := sdhci-pltfm.o
+sdhci-platform-$(CONFIG_MMC_SDHCI_CNS3XXX) += sdhci-cns3xxx.o
obj-$(CONFIG_MMC_SDHCI_OF) += sdhci-of.o
sdhci-of-y := sdhci-of-core.o
diff --git a/drivers/mmc/host/sdhci-cns3xxx.c b/drivers/mmc/host/sdhci-cns3xxx.c
new file mode 100644
index 0000000..b7050b3
--- /dev/null
+++ b/drivers/mmc/host/sdhci-cns3xxx.c
@@ -0,0 +1,97 @@
+/*
+ * SDHCI support for CNS3xxx SoC
+ *
+ * Copyright 2008 Cavium Networks
+ * Copyright 2010 MontaVista Software, LLC.
+ *
+ * Authors: Scott Shu
+ * Anton Vorontsov <avorontsov@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/mmc/host.h>
+#include <linux/sdhci-pltfm.h>
+#include <mach/cns3xxx.h>
+#include "sdhci.h"
+#include "sdhci-pltfm.h"
+
+static unsigned int sdhci_cns3xxx_get_max_clk(struct sdhci_host *host)
+{
+ return 150000000;
+}
+
+static void sdhci_cns3xxx_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+ struct device *dev = mmc_dev(host->mmc);
+ int div = 1;
+ u16 clk;
+ unsigned long timeout;
+
+ if (clock == host->clock)
+ return;
+
+ sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
+
+ if (clock == 0)
+ goto out;
+
+ while (host->max_clk / div > clock) {
+ /*
+ * On CNS3xxx divider grows linearly up to 4, and then
+ * exponentially up to 256.
+ */
+ if (div < 4)
+ div += 1;
+ else if (div < 256)
+ div *= 2;
+ else
+ break;
+ }
+
+ dev_dbg(dev, "desired SD clock: %d, actual: %d\n",
+ clock, host->max_clk / div);
+
+ /* Divide by 3 is special. */
+ if (div != 3)
+ div >>= 1;
+
+ clk = div << SDHCI_DIVIDER_SHIFT;
+ clk |= SDHCI_CLOCK_INT_EN;
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+ timeout = 20;
+ while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
+ & SDHCI_CLOCK_INT_STABLE)) {
+ if (timeout == 0) {
+ dev_warn(dev, "clock is unstable");
+ break;
+ }
+ timeout--;
+ mdelay(1);
+ }
+
+ clk |= SDHCI_CLOCK_CARD_EN;
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+out:
+ host->clock = clock;
+}
+
+static struct sdhci_ops sdhci_cns3xxx_ops = {
+ .get_max_clock = sdhci_cns3xxx_get_max_clk,
+ .set_clock = sdhci_cns3xxx_set_clock,
+};
+
+struct sdhci_pltfm_data sdhci_cns3xxx_pdata = {
+ .ops = &sdhci_cns3xxx_ops,
+ .quirks = SDHCI_QUIRK_BROKEN_DMA |
+ SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
+ SDHCI_QUIRK_INVERTED_WRITE_PROTECT |
+ SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
+ SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
+ SDHCI_QUIRK_NONSTANDARD_CLOCK,
+};
diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c
index 4c043bb..e045e3c 100644
--- a/drivers/mmc/host/sdhci-pltfm.c
+++ b/drivers/mmc/host/sdhci-pltfm.c
@@ -158,6 +158,9 @@ static int __devexit sdhci_pltfm_remove(struct platform_device *pdev)
static const struct platform_device_id sdhci_pltfm_ids[] = {
{ "sdhci", },
+#ifdef CONFIG_MMC_SDHCI_CNS3XXX
+ { "sdhci-cns3xxx", (kernel_ulong_t)&sdhci_cns3xxx_pdata },
+#endif
{ },
};
MODULE_DEVICE_TABLE(platform, sdhci_pltfm_ids);
diff --git a/drivers/mmc/host/sdhci-pltfm.h b/drivers/mmc/host/sdhci-pltfm.h
index 4aa07a9..900f329 100644
--- a/drivers/mmc/host/sdhci-pltfm.h
+++ b/drivers/mmc/host/sdhci-pltfm.h
@@ -11,4 +11,8 @@
#ifndef _DRIVERS_MMC_SDHCI_PLTFM_H
#define _DRIVERS_MMC_SDHCI_PLTFM_H
+#include <linux/sdhci-pltfm.h>
+
+extern struct sdhci_pltfm_data sdhci_cns3xxx_pdata;
+
#endif /* _DRIVERS_MMC_SDHCI_PLTFM_H */
--
1.7.0.5
next prev parent reply other threads:[~2010-06-25 18:06 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-25 18:05 [PATCH 0/3] Add support for CNS3xxx SDHCI hosts Anton Vorontsov
2010-06-25 18:06 ` [PATCH 1/3] sdhci-pltfm: Switch to module device table matching Anton Vorontsov
2010-06-25 18:06 ` [PATCH 2/3] sdhci-pltfm: Reorganize Makefile entries to support SoC devices Anton Vorontsov
2010-06-25 18:06 ` Anton Vorontsov [this message]
2010-07-01 20:48 ` [PATCH 3/3] sdhci-pltfm: Add support for CNS3xxx " Andrew Morton
2010-07-08 15:36 ` Anton Vorontsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100625180644.GC18241@oksana.dev.rtsoft.ru \
--to=avorontsov@mvista.com \
--cc=akpm@linux-foundation.org \
--cc=ben@simtec.co.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=richard.rojfors@pelagicore.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.