From mboxrd@z Thu Jan 1 00:00:00 1970 From: Guenter Roeck Date: Wed, 30 Jun 2010 17:27:46 +0000 Subject: Re: [lm-sensors] Nuvoton W83667HG-B support request Message-Id: <20100630172746.GA5662@ericsson.com> List-Id: References: <295942.63235.qm@web120612.mail.ne1.yahoo.com> In-Reply-To: <295942.63235.qm@web120612.mail.ne1.yahoo.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org I don't have a datasheet, but from looking into the "Open Hardware Monitor" source it seems that W83667HG and W83667HG-B are identical from a programming perspective. Only difference is the chip ID, which should be 0xb350 instead of 0xa510. So you should be able to use the existing driver by setting the force_id module parameter to 0xa510. If that works, and there are no objections, I can create a patch to auto-detect the chip. Guenter On Wed, Jun 30, 2010 at 10:19:29AM -0400, Ethan Lawrence wrote: > Hello, > It seems my new motherbord has 'Nuvoton W83667HG-B Super IO Sensors' chip which is not supported yet. > Device wiki says that there is a driver (w83627ehf) for W83667HG chip and support for W83667HG-B will probably be added to it. > > Could you please add support for the new chip? > > Previous support requests for this chip: > http://lists.lm-sensors.org/pipermail/lm-sensors/2009-November/027193.html > http://lists.lm-sensors.org/pipermail/lm-sensors/2010-February/027842.html > http://lists.lm-sensors.org/pipermail/lm-sensors/2010-May/028545.html > http://lists.lm-sensors.org/pipermail/lm-sensors/2010-June/028710.html > > > Thanks! > --- > Ethan > > _______________________________________________ > lm-sensors mailing list > lm-sensors@lm-sensors.org > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors