From: Robert Love <robert.w.love@intel.com>
To: James.Bottomley@suse.de, linux-scsi@vger.kernel.org
Cc: Joe Eykholt <jeykholt@cisco.com>
Subject: [PATCH 17/28] libfcoe: Fix FIP ELS encapsulation details for FLOGI responses
Date: Tue, 20 Jul 2010 15:20:35 -0700 [thread overview]
Message-ID: <20100720222035.17116.66903.stgit@localhost.localdomain> (raw)
In-Reply-To: <20100720221904.17116.78553.stgit@localhost.localdomain>
From: Joe Eykholt <jeykholt@cisco.com>
When sending a FLOGI LS_ACC, which we only do in point-to-multipoint
mode, the MAC descriptor should have the granted MAC set to
0x0efd00 || D_ID.
When sending an LS_RJT, there should be no MAC descriptor.
When sending either an LS_ACC or LS_RJT, the subcode should indicate
an reply, not a request.
Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
---
drivers/scsi/fcoe/libfcoe.c | 42 ++++++++++++++++++++++++++++--------------
1 files changed, 28 insertions(+), 14 deletions(-)
diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c
index 79df78f..4865e81 100644
--- a/drivers/scsi/fcoe/libfcoe.c
+++ b/drivers/scsi/fcoe/libfcoe.c
@@ -469,11 +469,15 @@ static int fcoe_ctlr_encaps(struct fcoe_ctlr *fip, struct fc_lport *lport,
struct fip_header fip;
struct fip_encaps encaps;
} __attribute__((packed)) *cap;
+ struct fc_frame_header *fh;
struct fip_mac_desc *mac;
struct fcoe_fcf *fcf;
size_t dlen;
u16 fip_flags;
+ u8 op;
+ fh = (struct fc_frame_header *)skb->data;
+ op = *(u8 *)(fh + 1);
dlen = sizeof(struct fip_encaps) + skb->len; /* len before push */
cap = (struct fip_encaps_head *)skb_push(skb, sizeof(*cap));
memset(cap, 0, sizeof(*cap));
@@ -481,6 +485,7 @@ static int fcoe_ctlr_encaps(struct fcoe_ctlr *fip, struct fc_lport *lport,
if (lport->point_to_multipoint) {
if (fcoe_ctlr_vn_lookup(fip, d_id, cap->eth.h_dest))
return -ENODEV;
+ fip_flags = 0;
} else {
fcf = fip->sel_fcf;
if (!fcf)
@@ -497,26 +502,35 @@ static int fcoe_ctlr_encaps(struct fcoe_ctlr *fip, struct fc_lport *lport,
cap->fip.fip_ver = FIP_VER_ENCAPS(FIP_VER);
cap->fip.fip_op = htons(FIP_OP_LS);
- cap->fip.fip_subcode = FIP_SC_REQ;
- cap->fip.fip_dl_len = htons((dlen + sizeof(*mac)) / FIP_BPW);
+ if (op == ELS_LS_ACC || op == ELS_LS_RJT)
+ cap->fip.fip_subcode = FIP_SC_REP;
+ else
+ cap->fip.fip_subcode = FIP_SC_REQ;
cap->fip.fip_flags = htons(fip_flags);
cap->encaps.fd_desc.fip_dtype = dtype;
cap->encaps.fd_desc.fip_dlen = dlen / FIP_BPW;
- mac = (struct fip_mac_desc *)skb_put(skb, sizeof(*mac));
- memset(mac, 0, sizeof(*mac));
- mac->fd_desc.fip_dtype = FIP_DT_MAC;
- mac->fd_desc.fip_dlen = sizeof(*mac) / FIP_BPW;
- if (dtype != FIP_DT_FLOGI && dtype != FIP_DT_FDISC) {
- memcpy(mac->fd_mac, fip->get_src_addr(lport), ETH_ALEN);
- } else if (fip_flags & FIP_FL_SPMA) {
- LIBFCOE_FIP_DBG(fip, "FLOGI/FDISC sent with SPMA\n");
- memcpy(mac->fd_mac, fip->ctl_src_addr, ETH_ALEN);
- } else {
- LIBFCOE_FIP_DBG(fip, "FLOGI/FDISC sent with FPMA\n");
- /* FPMA only FLOGI must leave the MAC desc set to all 0s */
+ if (op != ELS_LS_RJT) {
+ dlen += sizeof(*mac);
+ mac = (struct fip_mac_desc *)skb_put(skb, sizeof(*mac));
+ memset(mac, 0, sizeof(*mac));
+ mac->fd_desc.fip_dtype = FIP_DT_MAC;
+ mac->fd_desc.fip_dlen = sizeof(*mac) / FIP_BPW;
+ if (dtype != FIP_DT_FLOGI && dtype != FIP_DT_FDISC) {
+ memcpy(mac->fd_mac, fip->get_src_addr(lport), ETH_ALEN);
+ } else if (fip->mode == FIP_MODE_VN2VN) {
+ hton24(mac->fd_mac, FIP_VN_FC_MAP);
+ hton24(mac->fd_mac + 3, fip->port_id);
+ } else if (fip_flags & FIP_FL_SPMA) {
+ LIBFCOE_FIP_DBG(fip, "FLOGI/FDISC sent with SPMA\n");
+ memcpy(mac->fd_mac, fip->ctl_src_addr, ETH_ALEN);
+ } else {
+ LIBFCOE_FIP_DBG(fip, "FLOGI/FDISC sent with FPMA\n");
+ /* FPMA only FLOGI. Must leave the MAC desc zeroed. */
+ }
}
+ cap->fip.fip_dl_len = htons(dlen / FIP_BPW);
skb->protocol = htons(ETH_P_FIP);
skb_reset_mac_header(skb);
next prev parent reply other threads:[~2010-07-20 22:20 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-20 22:19 [PATCH 00/28] libfc, libfcoe and fcoe updates for scsi-misc Robert Love
2010-07-20 22:19 ` [PATCH 01/28] libfc: fix slowpath error from WARN_ON in fc_fcp_send_data Robert Love
2010-07-20 22:19 ` [PATCH 02/28] fcoe: make it possible to verify fcoe with sparse Robert Love
2010-07-20 22:19 ` [PATCH 03/28] libfc: IO errors on link down due to cable unplug Robert Love
2010-07-21 3:29 ` Mike Christie
2010-07-27 21:32 ` Vasu Dev
2010-07-27 22:08 ` Mike Christie
2010-07-28 7:32 ` Mike Christie
2010-07-30 20:34 ` Vasu Dev
2010-07-20 22:19 ` [PATCH 04/28] fcoe: cleans up fcoe_disable and fcoe_enable Robert Love
2010-07-20 22:19 ` [PATCH 05/28] fcoe: adds src and dest mac address checking for fcoe frames Robert Love
2010-07-20 22:19 ` [PATCH 06/28] libfc: convert rport lookup to be RCU safe Robert Love
2010-07-20 22:19 ` [PATCH 07/28] libfc: provide space for LLD after remote port structure Robert Love
2010-07-20 22:19 ` [PATCH 08/28] libfcoe: convert FIP to lock with mutex instead of spin lock Robert Love
2010-07-20 22:19 ` [PATCH 09/28] libfc: add discovery-private pointer for LLD Robert Love
2010-07-20 22:19 ` [PATCH 10/28] libfcoe: fcoe: fnic: change fcoe_ctlr_init interface to specify mode Robert Love
2010-07-20 22:20 ` [PATCH 11/28] libfc: Add local port point-to-multipoint flag Robert Love
2010-07-20 22:20 ` [PATCH 12/28] libfc: add FLOGI state to rport for VN2VN Robert Love
2010-07-20 22:20 ` [PATCH 13/28] libfc: track FIP exchanges Robert Love
2010-07-20 22:20 ` [PATCH 14/28] libfcoe: add protocol description of FIP VN2VN mode Robert Love
2010-07-20 22:20 ` [PATCH 15/28] libfcoe: add state change debugging Robert Love
2010-07-20 22:20 ` [PATCH 16/28] libfcoe: fcoe: fnic: add FIP VN2VN point-to-multipoint support Robert Love
2010-07-20 22:20 ` Robert Love [this message]
2010-07-20 22:20 ` [PATCH 18/28] fcoe libfcoe: use correct FC-MAP for VN2VN mode Robert Love
2010-07-20 22:20 ` [PATCH 19/28] fcoe: config via separate create_vn2vn module parameter Robert Love
2010-07-20 22:20 ` [PATCH 20/28] libfc: eliminate rport LOGO state Robert Love
2010-07-20 22:20 ` [PATCH 21/28] libfc: add fc_frame_sid() and fc_frame_did() functions Robert Love
2010-07-20 22:21 ` [PATCH 22/28] libfc: add fc_fill_reply_hdr() and fc_fill_hdr() Robert Love
2010-07-20 22:21 ` [PATCH 23/28] libfc: add interface to allocate a sequence for incoming requests Robert Love
2010-07-20 22:21 ` [PATCH 24/28] libfc: don't require a local exchange " Robert Love
2010-07-20 22:21 ` [PATCH 25/28] fcoe: fix offload feature flag change from netdev Robert Love
2010-07-20 22:21 ` [PATCH 26/28] Revert "[SCSI] fcoe: Fix using VLAN ID in creating lport's WWWN/WWPN" Robert Love
2010-07-20 22:21 ` [PATCH 27/28] libfc: Add retry logic to lport state machine when receiving LS_RJT Robert Love
2010-07-20 22:21 ` [PATCH 28/28] fcoe: remove check for zero fabric name Robert Love
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100720222035.17116.66903.stgit@localhost.localdomain \
--to=robert.w.love@intel.com \
--cc=James.Bottomley@suse.de \
--cc=jeykholt@cisco.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.