From: kmpark@infradead.org (Kyungmin Park)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] S5V310: I2C0/I2C1/I2C2 support
Date: Fri, 30 Jul 2010 19:55:35 +0900 [thread overview]
Message-ID: <20100730105535.GA15067@july> (raw)
From: Kyungmin Park <kyungmin.park@samsung.com>
Configure proper mux pins and define i2c0/i2c1/i2c2.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
arch/arm/mach-s5pv310/Kconfig | 10 ++++++++++
arch/arm/mach-s5pv310/Makefile | 5 +++++
arch/arm/mach-s5pv310/setup-i2c0.c | 12 ++++++++++--
arch/arm/mach-s5pv310/setup-i2c1.c | 25 +++++++++++++++++++++++++
arch/arm/mach-s5pv310/setup-i2c2.c | 26 ++++++++++++++++++++++++++
5 files changed, 76 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/mach-s5pv310/setup-i2c1.c
create mode 100644 arch/arm/mach-s5pv310/setup-i2c2.c
diff --git a/arch/arm/mach-s5pv310/Kconfig b/arch/arm/mach-s5pv310/Kconfig
index 2fe8149..faa3436 100644
--- a/arch/arm/mach-s5pv310/Kconfig
+++ b/arch/arm/mach-s5pv310/Kconfig
@@ -15,6 +15,16 @@ config CPU_S5PV310
help
Enable S5PV310 CPU support
+config S5PV310_SETUP_I2C1
+ bool
+ help
+ Common setup code for i2c bus 1.
+
+config S5PV310_SETUP_I2C2
+ bool
+ help
+ Common setup code for i2c bus 2.
+
# machine support
config MACH_SMDKV310
diff --git a/arch/arm/mach-s5pv310/Makefile b/arch/arm/mach-s5pv310/Makefile
index 5b52132..82dbbaa 100644
--- a/arch/arm/mach-s5pv310/Makefile
+++ b/arch/arm/mach-s5pv310/Makefile
@@ -23,3 +23,8 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o
obj-$(CONFIG_MACH_UNIVERSAL) += mach-universal.o
+
+# device support
+
+obj-$(CONFIG_S5PV310_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S5PV310_SETUP_I2C2) += setup-i2c2.o
diff --git a/arch/arm/mach-s5pv310/setup-i2c0.c b/arch/arm/mach-s5pv310/setup-i2c0.c
index d4f5a81..b14dea7 100644
--- a/arch/arm/mach-s5pv310/setup-i2c0.c
+++ b/arch/arm/mach-s5pv310/setup-i2c0.c
@@ -1,4 +1,5 @@
-/* linux/arch/arm/mach-s5pv210/setup-i2c0.c
+/*
+ * linux/arch/arm/mach-s5pv310/setup-i2c0.c
*
* Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
@@ -14,7 +15,14 @@
struct platform_device; /* don't need the contents */
+#include <mach/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
{
-/* will be implemented later */
+ s3c_gpio_cfgpin(S5PV310_GPD1(0), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PV310_GPD1(0), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PV310_GPD1(1), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PV310_GPD1(1), S3C_GPIO_PULL_UP);
}
diff --git a/arch/arm/mach-s5pv310/setup-i2c1.c b/arch/arm/mach-s5pv310/setup-i2c1.c
new file mode 100644
index 0000000..76099ff
--- /dev/null
+++ b/arch/arm/mach-s5pv310/setup-i2c1.c
@@ -0,0 +1,25 @@
+/*
+ * linux/arch/arm/mach-s5pv310/setup-i2c1.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co., Ltd.
+ *
+ * I2C1 GPIO configuration.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct platform_device; /* don't need the contents */
+
+#include <mach/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c1_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgpin(S5PV310_GPD1(2), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PV310_GPD1(2), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PV310_GPD1(3), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PV310_GPD1(3), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/mach-s5pv310/setup-i2c2.c b/arch/arm/mach-s5pv310/setup-i2c2.c
new file mode 100644
index 0000000..2f1ca7e
--- /dev/null
+++ b/arch/arm/mach-s5pv310/setup-i2c2.c
@@ -0,0 +1,26 @@
+/*
+ * linux/arch/arm/mach-s5pv310/setup-i2c2.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * I2C2 GPIO configuration.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct platform_device; /* don't need the contents */
+
+#include <mach/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c2_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgpin(S5PV310_GPA0(6), S3C_GPIO_SFN(3));
+ s3c_gpio_setpull(S5PV310_GPA0(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PV310_GPA0(7), S3C_GPIO_SFN(3));
+ s3c_gpio_setpull(S5PV310_GPA0(7), S3C_GPIO_PULL_UP);
+}
next reply other threads:[~2010-07-30 10:55 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-30 10:55 Kyungmin Park [this message]
2010-07-31 2:05 ` [PATCH] S5V310: I2C0/I2C1/I2C2 support Kukjin Kim
2010-07-31 4:02 ` Kyungmin Park
2010-07-31 10:53 ` Russell King - ARM Linux
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100730105535.GA15067@july \
--to=kmpark@infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.