[PATCH 4/7] PCI / PCIe: Disable PCIe port services during port initialization

["Rafael J. Wysocki" <rjw@sisk.pl>]

From: Rafael J. Wysocki <rjw@sisk.pl>
Subject: PCI / PCIe: Disable PCIe port services during port initialization

In principle PCIe port services may be enabled by the BIOS, so it's
better to disable them during port initialization to avoid spurious
events from being generated.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
---
 drivers/pci/pcie/portdrv_core.c |   29 ++++++++++++++++++++++++++---
 1 file changed, 26 insertions(+), 3 deletions(-)

Index: linux-2.6/drivers/pci/pcie/portdrv_core.c
===================================================================
--- linux-2.6.orig/drivers/pci/pcie/portdrv_core.c
+++ linux-2.6/drivers/pci/pcie/portdrv_core.c
@@ -256,20 +256,43 @@ static int get_port_device_capability(st
 	/* Hot-Plug Capable */
 	if ((cap_mask & PCIE_PORT_SERVICE_HP) && (reg16 & PCI_EXP_FLAGS_SLOT)) {
 		pci_read_config_dword(dev, pos + PCI_EXP_SLTCAP, &reg32);
-		if (reg32 & PCI_EXP_SLTCAP_HPC)
+		if (reg32 & PCI_EXP_SLTCAP_HPC) {
 			services |= PCIE_PORT_SERVICE_HP;
+			/*
+			 * Disable hot-plug interrupts in case they have been
+			 * enabled by the BIOS and the hot-plug service driver
+			 * is not loaded.
+			 */
+			pos += PCI_EXP_SLTCTL;
+			pci_read_config_word(dev, pos, &reg16);
+			reg16 &= ~(PCI_EXP_SLTCTL_CCIE | PCI_EXP_SLTCTL_HPIE);
+			pci_write_config_word(dev, pos, reg16);
+		}
 	}
 	/* AER capable */
 	if ((cap_mask & PCIE_PORT_SERVICE_AER)
-	    && pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR))
+	    && pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR)) {
 		services |= PCIE_PORT_SERVICE_AER;
+		/*
+		 * Disable AER on this port in case it's been enabled by the
+		 * BIOS (the AER service driver will enable it when necessary).
+		 */
+		pci_disable_pcie_error_reporting(dev);
+	}
 	/* VC support */
 	if (pci_find_ext_capability(dev, PCI_EXT_CAP_ID_VC))
 		services |= PCIE_PORT_SERVICE_VC;
 	/* Root ports are capable of generating PME too */
 	if ((cap_mask & PCIE_PORT_SERVICE_PME)
-	    && dev->pcie_type == PCI_EXP_TYPE_ROOT_PORT)
+	    && dev->pcie_type == PCI_EXP_TYPE_ROOT_PORT) {
 		services |= PCIE_PORT_SERVICE_PME;
+		/*
+		 * Disable PME interrupt on this port in case it's been enabled
+		 * by the BIOS (the PME service driver will enable it when
+		 * necessary).
+		 */
+		pcie_pme_interrupt_enable(dev, false);
+	}
 
 	return services;
 }