From: akpm@linux-foundation.org
To: torvalds@linux-foundation.org
Cc: akpm@linux-foundation.org, notasas@gmail.com,
adrian.hunter@nokia.com, kishore.kadiyala@ti.com,
kvalo@adurom.com, linux-mmc@vger.kernel.org,
linux@arm.linux.org.uk, madhu.cr@ti.com, me@bobcopeland.com,
tony@atomide.com
Subject: [patch 046/177] omap: pandora: pass wl1251 information to SDIO core
Date: Tue, 10 Aug 2010 18:01:52 -0700 [thread overview]
Message-ID: <201008110101.o7B11q0b027084@imap1.linux-foundation.org> (raw)
From: Grazvydas Ignotas <notasas@gmail.com>
Pandora has TI WL1251 attached on MMC3, which is non-standard SDIO chip.
Make use MMC_QUIRK_NONSTD_SDIO to tell SDIO core about it.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Cc: Adrian Hunter <adrian.hunter@nokia.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Bob Copeland <me@bobcopeland.com>
Cc: Kalle Valo <kvalo@adurom.com>
Cc: Madhusudhan Chikkature <madhu.cr@ti.com>
Cc: Kishore Kadiyala <kishore.kadiyala@ti.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/arm/mach-omap2/board-omap3pandora.c | 16 ++++++++++++++++
arch/arm/mach-omap2/hsmmc.c | 1 +
arch/arm/mach-omap2/hsmmc.h | 4 ++++
3 files changed, 21 insertions(+)
diff -puN arch/arm/mach-omap2/board-omap3pandora.c~omap-pandora-pass-wl1251-information-to-sdio-core arch/arm/mach-omap2/board-omap3pandora.c
--- a/arch/arm/mach-omap2/board-omap3pandora.c~omap-pandora-pass-wl1251-information-to-sdio-core
+++ a/arch/arm/mach-omap2/board-omap3pandora.c
@@ -32,6 +32,7 @@
#include <linux/input.h>
#include <linux/input/matrix_keypad.h>
#include <linux/gpio_keys.h>
+#include <linux/mmc/card.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -258,6 +259,20 @@ static struct platform_device pandora_ds
},
};
+static void pandora_wl1251_init_card(struct mmc_card *card)
+{
+ /*
+ * We have TI wl1251 attached to MMC3. Pass this information to
+ * SDIO core because it can't be probed by normal methods.
+ */
+ card->quirks |= MMC_QUIRK_NONSTD_SDIO;
+ card->cccr.wide_bus = 1;
+ card->cis.vendor = 0x104c;
+ card->cis.device = 0x9066;
+ card->cis.blksize = 512;
+ card->cis.max_dtr = 20000000;
+}
+
static struct omap2_hsmmc_info omap3pandora_mmc[] = {
{
.mmc = 1,
@@ -279,6 +294,7 @@ static struct omap2_hsmmc_info omap3pand
.wires = 4,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
+ .init_card = pandora_wl1251_init_card,
},
{} /* Terminator */
};
diff -puN arch/arm/mach-omap2/hsmmc.c~omap-pandora-pass-wl1251-information-to-sdio-core arch/arm/mach-omap2/hsmmc.c
--- a/arch/arm/mach-omap2/hsmmc.c~omap-pandora-pass-wl1251-information-to-sdio-core
+++ a/arch/arm/mach-omap2/hsmmc.c
@@ -268,6 +268,7 @@ void __init omap2_hsmmc_init(struct omap
mmc->slots[0].gpio_wp = c->gpio_wp;
mmc->slots[0].remux = c->remux;
+ mmc->slots[0].init_card = c->init_card;
if (c->cover_only)
mmc->slots[0].cover = 1;
diff -puN arch/arm/mach-omap2/hsmmc.h~omap-pandora-pass-wl1251-information-to-sdio-core arch/arm/mach-omap2/hsmmc.h
--- a/arch/arm/mach-omap2/hsmmc.h~omap-pandora-pass-wl1251-information-to-sdio-core
+++ a/arch/arm/mach-omap2/hsmmc.h
@@ -6,6 +6,8 @@
* published by the Free Software Foundation.
*/
+struct mmc_card;
+
struct omap2_hsmmc_info {
u8 mmc; /* controller 1/2/3 */
u8 wires; /* 1/4/8 wires */
@@ -23,6 +25,8 @@ struct omap2_hsmmc_info {
int ocr_mask; /* temporary HACK */
/* Remux (pad configuation) when powering on/off */
void (*remux)(struct device *dev, int slot, int power_on);
+ /* init some special card */
+ void (*init_card)(struct mmc_card *card);
};
#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
_
reply other threads:[~2010-08-11 1:30 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201008110101.o7B11q0b027084@imap1.linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=adrian.hunter@nokia.com \
--cc=kishore.kadiyala@ti.com \
--cc=kvalo@adurom.com \
--cc=linux-mmc@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=madhu.cr@ti.com \
--cc=me@bobcopeland.com \
--cc=notasas@gmail.com \
--cc=tony@atomide.com \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.