Re: [GIT PULL] devel/pat + devel/kms.fixes-0.5 on RV730 PRO [Radeon HD 4650]

["Pasi Kärkkäinen" <pasik@iki.fi>]

On Mon, Aug 16, 2010 at 04:06:23AM -0700, Boris Derzhavets wrote:
>    > Do you have "nomodeset" parameter for the dom0 kernel in grub.conf ?
> 
>    No , i don't
>    However , setup KMS via devices->staging drivers-> radeon by modesetting
>    by default
>    i got
> 
>     [drm] Initialized drm 1.1.0 20060810
>    [drm] radeon defaulting to kernel modesetting.
>    [drm] radeon kernel modesetting enabled.
>    xen: registering gsi 16 triggering 0 polarity 1
>    xen_allocate_pirq: returning irq 16 for gsi 16
>    xen: --> irq=16
>    Already setup the GSI :16
>    radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>    radeon 0000:01:00.0: setting latency timer to 64
>    [drm] radeon: Initializing kernel modesetting.
>    [drm] register mmio base: 0xFE8E0000
>    [drm] register mmio size: 65536
>    ATOM BIOS: 11X
>    [drm] Clocks initialized !
>    mtrr: type mismatch for d0000000,10000000 old: write-back new:
>    write-combining
>    [drm] Detected VRAM RAM=256M, BAR=256M
>    [drm] RAM width 128bits DDR
>    [TTM] Zone  kernel: Available graphics memory: 4073770 kiB.
>    [TTM] Zone   dma32: Available graphics memory: 2097152 kiB.
>    [drm] radeon: 256M of VRAM memory ready
>    [drm] radeon: 512M of GTT memory ready.
>    [drm] Loading RV730 CP Microcode
>    platform radeon_cp.0: firmware: requesting radeon/RV730_pfp.bin
>    r600_cp: Failed to load firmware "radeon/RV730_pfp.bin"
>    [drm:rv770_init] *ERROR* Failed to load firmware!
>    [drm:radeon_driver_load_kms] *ERROR* Fatal error while trying to
>    initialize radeon.
> 

So you're missing the firmware file. 

-- Pasi


>    Boris.
> 
>    --- On Mon, 8/16/10, Pasi Kärkkäinen <pasik@iki.fi> wrote:
> 
>      From: Pasi Kärkkäinen <pasik@iki.fi>
>      Subject: Re: [Xen-devel] [GIT PULL] devel/pat + devel/kms.fixes-0.5 on
>      RV730 PRO [Radeon HD 4650]
>      To: "Boris Derzhavets" <bderzhavets@yahoo.com>
>      Cc: xen-devel@lists.xensource.com, "Konrad Rzeszutek Wilk"
>      <konrad.wilk@oracle.com>
>      Date: Monday, August 16, 2010, 6:45 AM
> 
>      On Mon, Aug 16, 2010 at 03:40:19AM -0700, Boris Derzhavets wrote:
>      >    >.. And KMS modesetting works properly now in Xen dom0!
>      >    My onboard ATI Radeon is the following:
>      >
>      >    > # lspci -v | grep VGA
>      >     11:04.0 VGA compatible controller: ATI Technologies Inc ES1000
>      (rev 02)
>      >    (prog-if 00   [VGA controller])
>      >
>      >    Environment :  Xen 4.0.1-rc6 & 2.6.32.19 on top of F13 ( .config
>      attached)
>      >
>      >    [root@fedora13 ~]# lspci -v | grep VGA
>      >    01:00.0 VGA compatible controller: ATI Technologies Inc RV730 PRO
>      [Radeon
>      >    HD 4650] (prog-if 00 [VGA controller])
>      >
>      >    KMS seems do be disabled. "NOPAT" removed from kernel line.
>      >    Is it expected or i am  missing something ?
>      >
>      >    Dmesg fragment :-
>      >
>      >    [drm] Initialized drm 1.1.0 20060810
>      >    -> [drm] radeon defaulting to userspace modesetting.
> 
>      Do you have "nomodeset" parameter for the dom0 kernel in grub.conf ?
> 
>      -- PAsi
> 
>      >    pci 0000:01:00.0: setting latency timer to 64
>      >    [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor
>      0
>      >    mtrr: type mismatch for d0000000,10000000 old: write-back new:
>      >    write-combining
>      >    mtrr: type mismatch for d0000000,10000000 old: write-back new:
>      >    write-combining
>      >    mtrr: type mismatch for d0000000,10000000 old: write-back new:
>      >    write-combining
>      >    mtrr: type mismatch for d0000000,10000000 old: write-back new:
>      >    write-combining
>      >    [drm] Setting GART location based on new memory map
>      >    [drm] Loading RV730 CP Microcode
>      >    platform r600_cp.0: firmware: requesting radeon/RV730_pfp.bin
>      >    platform r600_cp.0: firmware: requesting radeon/RV730_me.bin
>      >    [drm] Resetting GPU
>      >    [drm] writeback test succeeded in 1 usecs
>      >
>      >    Boris.
>      >
>      >    --- On Sun, 8/15/10, Pasi Kärkkäinen <[1]pasik@iki.fi> wrote:
>      >
>      >      From: Pasi Kärkkäinen <[2]pasik@iki.fi>
>      >      Subject: Re: [Xen-devel] [GIT PULL] devel/pat +
>      devel/kms.fixes-0.5
>      >      To: "Konrad Rzeszutek Wilk" <[3]konrad.wilk@oracle.com>
>      >      Cc: "Jeremy Fitzhardinge" <[4]jeremy@goop.org>,
>      >      [5]xen-devel@lists.xensource.com
>      >      Date: Sunday, August 15, 2010, 4:41 PM
>      >
>      >      On Fri, Aug 06, 2010 at 10:06:09AM -0400, Konrad Rzeszutek Wilk
>      wrote:
>      >      >
>      >      > Some of them are marked as not for upstream consumption, while
>      some of
>      >      > the other are OK (and Daniel's is upstream). Those patches from
>      both
>      >      > branches make it possible to have Xorg working with the
>      following
>      >      > graphics cards on the PVOPS kernel:
>      >      >
>      >      > RIVA TNT2 Pro
>      >      > GeForce 1 256
>      >      > GeForce 4 Ti 4200
>      >      > GeForce 6150
>      >      > GeForce 6200
>      >      > GeForce 7300
>      >      > GeForce 8600 GT
>      >      > Radeon R100 QD (7200)
>      >      > Radeon RV100QY (7000)
>      >      > Radeon HD 3200
>      >      > Radeon HD 3450
>      >      > Radeon RV710 [Radeon HD 4350]
>      >      > Radeon ES1000
>      >      > ICH5 82865G
>      >      > ICH7 82G33/G31G
>      >      > ICH8 82Q963/Q965
>      >      > Matrox G450
>      >      > XGI Z7/Z9 (XG20 core)
>      >      >
>      >      > Testing was carried out using Fedora Core 13, Fedora Core 11,
>      and
>      >      Ubuntu
>      >      > Lucid 10.04 with the PVOPS kernel.
>      >      >
>      >      > The details are located at
>      >      [1][6]http://wiki.xensource.com/xenwiki/XenPVOPSDRM
>      >      > For the NVidia cards I backported the 2.6.34 nouvoua driver in
>      2.6.32
>      >      > and used that - it is pretty stable and even the experimental
>      Gallium
>      >      > drivers (3D) work well.
>      >      >
>      >
>      >      Hello,
>      >
>      >      I just tried the latest 2.6.32.19 kernel from xen/stable-2.6.32.x
>      >      branch,
>      >      which now includes the kms.fixes-0.5, on my radeon/supermicro
>      testbox.
>      >
>      >      .. And KMS modesetting works properly now in Xen dom0!
>      >      My onboard ATI Radeon is the following:
>      >
>      >      # lspci -v | grep VGA
>      >      11:04.0 VGA compatible controller: ATI Technologies Inc ES1000
>      (rev 02)
>      >      (prog-if 00 [VGA controller])
>      >
>      >      It seems also X starts OK, and I can use the Gnome desktop.
>      >      I could even run multiple OpenGL 3D applications! (ok, glxgears
>      :)
>      >
>      >      Thanks, great work!
>      >
>      >      -- Pasi
>      >
>      >      _______________________________________________
>      >      Xen-devel mailing list
>      >      [2][7]Xen-devel@lists.xensource.com
>      >      [3][8]http://lists.xensource.com/xen-devel
>      >
>      > References
>      >
>      >    Visible links
>      >    1. [9]http://wiki.xensource.com/xenwiki/XenPVOPSDRM
>      >    2. file:///mc/compose?to=[10]Xen-devel@lists.xensource.com
>      >    3. [11]http://lists.xensource.com/xen-devel
> 
>      _______________________________________________
>      Xen-devel mailing list
>      [12]Xen-devel@lists.xensource.com
>      [13]http://lists.xensource.com/xen-devel
> 
> References
> 
>    Visible links
>    1. file:///mc/compose?to=pasik@iki.fi
>    2. file:///mc/compose?to=pasik@iki.fi
>    3. file:///mc/compose?to=konrad.wilk@oracle.com
>    4. file:///mc/compose?to=jeremy@goop.org
>    5. file:///mc/compose?to=xen-devel@lists.xensource.com
>    6. http://wiki.xensource.com/xenwiki/XenPVOPSDRM
>    7. file:///mc/compose?to=Xen-devel@lists.xensource.com
>    8. http://lists.xensource.com/xen-devel
>    9. http://wiki.xensource.com/xenwiki/XenPVOPSDRM
>   10. file:///mc/compose?to=Xen-devel@lists.xensource.com
>   11. http://lists.xensource.com/xen-devel
>   12. file:///mc/compose?to=Xen-devel@lists.xensource.com
>   13. http://lists.xensource.com/xen-devel