From mboxrd@z Thu Jan 1 00:00:00 1970 From: Konrad Rzeszutek Wilk Subject: Re: [GIT PULL] devel/pat + devel/kms.fixes-0.5 on RV730 PRO [Radeon HD 4650] Date: Mon, 16 Aug 2010 16:05:27 -0400 Message-ID: <20100816200527.GA7344@phenom.dumpdata.com> References: <200987.29564.qm@web56107.mail.re3.yahoo.com> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable Return-path: Content-Disposition: inline In-Reply-To: <200987.29564.qm@web56107.mail.re3.yahoo.com> List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , Sender: xen-devel-bounces@lists.xensource.com Errors-To: xen-devel-bounces@lists.xensource.com To: Boris Derzhavets Cc: xen-devel@lists.xensource.com List-Id: xen-devel@lists.xenproject.org On Mon, Aug 16, 2010 at 11:35:24AM -0700, Boris Derzhavets wrote: > > Can you provide the serial output?=20 > No >=20 > > Is the error the same as you reported > before (were it could not load the firmware code?) >=20 > Yes.=20 > Xen System loads up so i have dmesg.log=A0 It's attached >=20 > > Can you try fiddling with the dracut options to force it include the > proper firmware bits? >=20 > Which ones ? That is what happens loading Dom0. How about -v? See if the file RV730_pfp.bin gets put in the initramfs image. Did you make sure that the CONFIG_DRM_RADEON is set to 'm'? After that did you recompile the kernel and modules and re-installed them? >=20 > Dmesg: >=20 > [drm] Loading RV730 CP Microcode > platform radeon_cp.0: firmware: requesting radeon/RV730_pfp.bin >=20 > =A0=A0=A0=A0 Hangs.... for a while. >=20 > r600_cp: Failed to load firmware "radeon/RV730_pfp.bin" > [drm:rv770_init] *ERROR* Failed to load firmware! > [drm:radeon_driver_load_kms] *ERROR* Fatal error while trying to initia= lize radeon. > radeon 0000:01:00.0: PCI INT A disabled > radeon: probe of 0000:01:00.0 failed with error -2 >=20 > Proceed with normal load. You need to figure out why it isn't including that firmware file on the initramfs.=20