From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stephane Casset Subject: PROBLEM: oops in nouveau driver in 2.6.36-rc* Date: Mon, 23 Aug 2010 17:35:50 +0200 Message-ID: <20100823153549.GA92379@gromalin.logidee.com> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="3MwIy2ne0vdjdPXF" Content-Transfer-Encoding: 7bit Return-path: Received: from gromalin.logidee.com (gromalin.logidee.com [213.91.4.12]) by gabe.freedesktop.org (Postfix) with ESMTP id 505EE9E75F for ; Mon, 23 Aug 2010 09:01:24 -0700 (PDT) Content-Disposition: inline List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: dri-devel-bounces+sf-dri-devel=m.gmane.org@lists.freedesktop.org Errors-To: dri-devel-bounces+sf-dri-devel=m.gmane.org@lists.freedesktop.org To: David Airlie , dri-devel@lists.freedesktop.org List-Id: dri-devel@lists.freedesktop.org --3MwIy2ne0vdjdPXF Content-Type: text/plain; charset=utf-8 Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hi, Since 2.6.36-rc1 I have an oops when loading the nouveau driver. The system woks ok expect for the nouveau driver and the console gets corrupted :( I attach relevant informations in attached files : o dmesg output for 2.6.36-rc2-git1 o ksymoops output for the above file If you need more informations please let me know. If you want me to test patches let me know. If you want me to run a git bissect let me know. thanx for your help. Other relevant informations: Output of ver_linux : Linux flocon 2.6.36-rc2-git1 #81 SMP PREEMPT Mon Aug 23 15:14:05 CEST 201= 0 i686 GNU/Linux =20 Gnu C 4.4.5 Gnu make 3.81 binutils 2.20.1 util-linux 2.17.2 mount support module-init-tools 3.12 e2fsprogs 1.41.12 jfsutils 1.1.12 xfsprogs 3.1.2 pcmciautils 015 Linux C Library 2.11.2 Dynamic linker (ldd) 2.11.2 Procps 3.2.8 Net-tools 1.60 Console-tools 0.2.3 Sh-utils 8.5 wireless-tools 30 Modules Loaded nfsd lockd nfs_acl auth_rpcgss sunrpc exportfs fus= e snd_intel8x0 snd_ac97_codec nouveau ac97_bus snd_pcm_oss snd_mixer_oss = snd_pcm ttm firewire_ohci snd_seq sg cb710_mmc uhci_hcd snd_timer firewir= e_core mmc_core drm_kms_helper sr_mod 8139too ehci_hcd snd_seq_device snd= crc_itu_t usbcore cb710 ohci1394 cdrom 8139cp soundcore cfbcopyarea snd_= page_alloc cfbimgblt ieee1394 intel_agp cfbfillrect battery ac btrfs crc3= 2c libcrc32c sd_mod Output of lspci : 00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-H= ub Interface (rev 02) Subsystem: Hewlett-Packard Company NX9500 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step= ping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dfast >TAbort- SERR- Capabilities: [a0] AGP version 3.0 Status: RQ=3D32 Iso- ArqSz=3D2 Cal=3D2 SBA+ ITACoh- GART64- HTrans- 64b= it- FW+ AGP3+ Rate=3Dx4,x8 Command: RQ=3D1 ArqSz=3D0 Cal=3D2 SBA- AGP+ GART64- 64bit- FW- Rate=3D<= none> Kernel driver in use: agpgart-intel 00:01.0 PCI bridge: Intel Corporation 82865G/PE/P PCI to AGP Controller (= rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step= ping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=3Dfast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:06.0 System peripheral: Intel Corporation 82865G/PE/P Processor to I/O= Memory Interface (rev ff) (prog-if ff) !!! Unknown header type 7f 00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHC= I Controller #1 (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company NX9500 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step= ping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interfa= ce Bridge (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Step= ping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- [disabled] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA PME(D0-,D1-,D2-,D3hot-,D3c= old-) Status: D0 NoSoftRst- PME-Enable- DSel=3D0 DScale=3D0 PME- Capabilities: [44] AGP version 3.0 Status: RQ=3D32 Iso- ArqSz=3D0 Cal=3D3 SBA+ ITACoh- GART64- HTrans- 64b= it- FW+ AGP3+ Rate=3Dx4,x8 Command: RQ=3D1 ArqSz=3D0 Cal=3D0 SBA- AGP- GART64- 64bit- FW- Rate=3D<= none> Kernel driver in use: nouveau 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/813= 9C/8139C+ (rev 10) Subsystem: Hewlett-Packard Company NX9500 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step= ping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- SERR- TAbort- SERR- Reset+ 16bInt- PostWrite- 16-bit legacy interface ports at 0001 02:01.1 FLASH memory: ENE Technology Inc CB710 Memory Card Reader Control= ler Subsystem: Hewlett-Packard Company NX9500 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Step= ping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- SERR- TAbort- SERR- 0x0000009f 0: 0x00000100 -> 0x0001ff70 On node 0 totalpages: 130830 free_area_init_node: node 0, pgdat c1358380, node_mem_map c140f020 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3966 pages, LIFO batch:0 Normal zone: 991 pages used for memmap Normal zone: 125841 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000) setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 13 pages/cpu @c1c00000 s29440 r0 d23808 u2097152 pcpu-alloc: s29440 r0 d23808 u2097152 alloc=1*4194304 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129807 Kernel command line: auto BOOT_IMAGE=Linux ro root=LABEL=root PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Memory: 511508k/523712k available (2396k kernel code, 11812k reserved, 1042k data, 340k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfff8f000 - 0xfffff000 ( 448 kB) vmalloc : 0xe0770000 - 0xfff8d000 ( 504 MB) lowmem : 0xc0000000 - 0xdff70000 ( 511 MB) .init : 0xc135c000 - 0xc13b1000 ( 340 kB) .data : 0xc125727c - 0xc135bdd4 (1042 kB) .text : 0xc1000000 - 0xc125727c (2396 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. Preemptable hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:320 Console: colour VGA+ 80x25 console [tty0] enabled Fast TSC calibration using PIT Detected 2793.243 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5588.25 BogoMIPS (lpj=9310810) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Performance Events: Netburst events, Netburst P4/Xeon PMU driver. ... version: 0 ... bit width: 40 ... generic registers: 18 ... value mask: 000000ffffffffff ... max period: 0000007fffffffff ... fixed-purpose events: 0 ... event mask: 000000000003ffff ACPI: Core revision 20100702 Enabling APIC mode: Flat. Using 1 I/O APICs ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... ..... (found apic 0 pin 0) ... ....... works. CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09 Booting Node 0, Processors #1 Ok. Initializing CPU#1 Brought up 2 CPUs Total of 2 processors activated (11176.00 BogoMIPS). NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd972, last bus=2 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62 PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xfebfffff] (ignored) pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) pci 0000:00:00.0: Enabling MCH 'Overflow' Device pci 0000:00:00.0: reg 10: [mem 0xd8000000-0xdfffffff pref] pci 0000:00:06.0: reg 10: [mem 0xfecf0000-0xfecf0fff] pci 0000:00:1d.0: reg 20: [io 0x1cc0-0x1cdf] pci 0000:00:1d.1: reg 20: [io 0x1ce0-0x1cff] pci 0000:00:1d.2: reg 20: [io 0x2000-0x201f] pci 0000:00:1d.7: reg 10: [mem 0xd0000000-0xd00003ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 pci 0000:00:1f.0: Enabled i801 SMBus device pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH4 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH4 GPIO pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:1f.1: reg 20: [io 0x2040-0x204f] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff] pci 0000:00:1f.3: reg 20: [io 0x2020-0x203f] pci 0000:00:1f.5: reg 10: [io 0x1400-0x14ff] pci 0000:00:1f.5: reg 14: [io 0x1c80-0x1cbf] pci 0000:00:1f.5: reg 18: [mem 0xd0000c00-0xd0000dff] pci 0000:00:1f.5: reg 1c: [mem 0xd0000800-0xd00008ff] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold pci 0000:00:1f.5: PME# disabled pci 0000:00:1f.6: reg 10: [io 0x1800-0x18ff] pci 0000:00:1f.6: reg 14: [io 0x1c00-0x1c7f] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold pci 0000:00:1f.6: PME# disabled pci 0000:01:00.0: reg 10: [mem 0xd1000000-0xd1ffffff] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff pref] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:01.0: bridge window [mem 0xd1000000-0xd1ffffff] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff pref] pci 0000:02:00.0: reg 10: [io 0x3000-0x30ff] pci 0000:02:00.0: reg 14: [mem 0xd2005800-0xd20058ff] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:02:01.0: reg 10: [mem 0xd2004000-0xd2004fff] pci 0000:02:01.0: supports D1 D2 pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:01.0: PME# disabled pci 0000:02:01.1: reg 10: [io 0x3c00-0x3c7f] pci 0000:02:01.1: supports D1 D2 pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot pci 0000:02:01.1: PME# disabled pci 0000:02:02.0: reg 10: [mem 0xd2005000-0xd20057ff] pci 0000:02:02.0: reg 14: [mem 0xd2000000-0xd2003fff] pci 0000:02:02.0: supports D1 D2 pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot pci 0000:02:02.0: PME# disabled pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x3000-0x3fff] pci 0000:00:1e.0: bridge window [mem 0xd2000000-0xd23fffff] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-02] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] Unable to assume PCIe control: Disabling ASPM ACPI: PCI Interrupt Link [LNKA] (IRQs 3 10 11 14 15) *5 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 10 *11 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 11 14 15) *4 ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 10 *11 14 15) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009f800 - 000000000009ffff reserve RAM buffer: 000000001ff70000 - 000000001fffffff hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered system 00:01: [io 0x1000-0x10bf] could not be reserved system 00:01: [io 0x1180-0x11bf] has been reserved system 00:01: [io 0x04d0-0x04d1] has been reserved system 00:01: [io 0x0600-0x060f] has been reserved system 00:01: [io 0xfe00] has been reserved system 00:01: [io 0xfe10-0xfe11] has been reserved system 00:01: [mem 0xfecf0000-0xfecfffff] could not be reserved system 00:01: [mem 0xfed20000-0xfed8ffff] has been reserved system 00:01: [mem 0xff800000-0xffffffff] could not be reserved ACPI: EC: GPE storm detected, transactions will use polling mode pci 0000:00:1e.0: BAR 9: assigned [mem 0x20000000-0x23ffffff pref] pci 0000:00:1f.1: BAR 5: assigned [mem 0x24000000-0x240003ff] pci 0000:00:1f.1: BAR 5: set to [mem 0x24000000-0x240003ff] (PCI address [0x24000000-0x240003ff] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000) pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io disabled] pci 0000:00:01.0: bridge window [mem 0xd1000000-0xd1ffffff] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff pref] pci 0000:02:01.0: BAR 9: assigned [mem 0x20000000-0x23ffffff pref] pci 0000:02:01.0: BAR 10: assigned [mem 0x28000000-0x2bffffff] pci 0000:02:01.0: BAR 7: assigned [io 0x3400-0x34ff] pci 0000:02:01.0: BAR 8: assigned [io 0x3800-0x38ff] pci 0000:02:01.0: CardBus bridge to [bus 03-06] pci 0000:02:01.0: bridge window [io 0x3400-0x34ff] pci 0000:02:01.0: bridge window [io 0x3800-0x38ff] pci 0000:02:01.0: bridge window [mem 0x20000000-0x23ffffff pref] pci 0000:02:01.0: bridge window [mem 0x28000000-0x2bffffff] pci 0000:00:1e.0: PCI bridge to [bus 02-02] pci 0000:00:1e.0: bridge window [io 0x3000-0x3fff] pci 0000:00:1e.0: bridge window [mem 0xd2000000-0xd23fffff] pci 0000:00:1e.0: bridge window [mem 0x20000000-0x23ffffff pref] pci 0000:00:1e.0: setting latency timer to 64 pci 0000:02:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] pci_bus 0000:01: resource 1 [mem 0xd1000000-0xd1ffffff] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff pref] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] pci_bus 0000:02: resource 1 [mem 0xd2000000-0xd23fffff] pci_bus 0000:02: resource 2 [mem 0x20000000-0x23ffffff pref] pci_bus 0000:02: resource 4 [io 0x0000-0xffff] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff] pci_bus 0000:03: resource 0 [io 0x3400-0x34ff] pci_bus 0000:03: resource 1 [io 0x3800-0x38ff] pci_bus 0000:03: resource 2 [mem 0x20000000-0x23ffffff pref] pci_bus 0000:03: resource 3 [mem 0x28000000-0x2bffffff] NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 pci 0000:01:00.0: Boot video device PCI: CLS mismatch (1020 != 32), using 64 bytes Trying to unpack rootfs image as initramfs... Freeing initrd memory: 3012k freed Simple Boot Flag at 0x36 set to 0x1 msgmni has been set to 1004 io scheduler noop registered io scheduler deadline registered (default) io scheduler cfq registered input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0E:00/input/input0 ACPI: Sleep Button [SBTN] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] ACPI: acpi_idle registered with cpuidle Marking TSC unstable due to TSC halts in idle Switching to clocksource hpet ACPI: Invalid PBLK length [0] thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (51 C) Real Time Clock Driver v1.12b Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 brd: module loaded ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x2040 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2048 irq 15 PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 md: multipath personality registered for level -4 md: faulty personality registered for level -5 device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu IPv4 over IPv4 tunneling driver GRE over IPv4 tunneling driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 NET: Registered protocol family 15 Registering the dns_resolver key type p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available Using IPI No-Shortcut mode input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4241N, 0C27, max MWDMA2 ata1.00: ATA-6: HTS541010G9AT00, MBZOA60A, max UDMA/100 ata1.00: 195371568 sectors, multi 16: LBA48 ata2.00: configured for MWDMA2 ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA HTS541010G9AT00 MBZO PQ: 0 ANSI: 5 scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4241N 0C27 PQ: 0 ANSI: 5 Freeing unused kernel memory: 340k freed Write protecting the kernel text: 2400k Write protecting the kernel read-only data: 856k udevd (984): /proc/984/oom_adj is deprecated, please use /proc/984/oom_score_adj instead. sd 0:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.1 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb1, caps: 0xa04711/0xa/0x0 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4 sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 > sd 0:0:0:0: [sda] Attached SCSI disk Btrfs loaded EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) udev: starting version 161 ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT1] (battery present) agpgart-intel 0000:00:00.0: Intel 865 Chipset agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xd8000000 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) 8139cp 0000:02:00.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too ohci1394 0000:02:02.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[d2005000-d20057ff] Max Packet=[2048] IR/IT contexts=[4/8] cb710 0000:02:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 cb710 0000:02:01.1: id 0, IO 0x00013c00, IRQ 18 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0000000 8139too: 8139too Fast Ethernet driver 0.9.28 8139too 0000:02:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 8139too 0000:02:00.0: eth0: RealTek RTL8139 at 0x3000, 00:c0:9f:29:f7:ea, IRQ 20 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001cc0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001ce0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002000 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 nouveau 0000:01:00.0: power state changed by ACPI to D0 nouveau 0000:01:00.0: power state changed by ACPI to D0 nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [drm] nouveau 0000:01:00.0: Detected an NV30 generation card (0x031a00a1) [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [drm] nouveau 0000:01:00.0: ... BIOS checksum invalid [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM [drm] nouveau 0000:01:00.0: ... BIOS signature not found [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PCIROM [drm] nouveau 0000:01:00.0: ... appears to be valid [drm] nouveau 0000:01:00.0: BMP BIOS found [drm] nouveau 0000:01:00.0: BMP version 5.39 [drm] nouveau 0000:01:00.0: Bios version 04.31.20.46 [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.2 [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 03000223 00000005 [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01010100 000088b8 [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 020303f1 00000003 [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xEC86 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xEFE5 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xF148 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xF2AF [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF2CC [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xF2E9 Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Intel ICH 0000:00:1f.5: setting latency timer to 64 BUG: unable to handle kernel paging request at fffa6ff0 IP: [] iowrite32+0xa/0x29 *pde = 013b9067 *pte = 00000000 Oops: 0002 [#1] PREEMPT SMP last sysfs file: /sys/module/usbcore/initstate Modules linked in: snd_intel8x0(+) snd_ac97_codec nouveau(+) ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm ttm firewire_ohci snd_seq sg cb710_mmc uhci_hcd snd_timer firewire_core mmc_core drm_kms_helper sr_mod 8139too ehci_hcd snd_seq_device snd crc_itu_t usbcore cb710 ohci1394 cdrom 8139cp soundcore cfbcopyarea snd_page_alloc cfbimgblt ieee1394 intel_agp cfbfillrect battery ac btrfs crc32c libcrc32c sd_mod Pid: 1385, comm: modprobe Not tainted 2.6.36-rc2-git1 #81 0880/Pavilion zd7000 (DP761E#ABF) EIP: 0060:[] EFLAGS: 00010292 CPU: 1 EIP is at iowrite32+0xa/0x29 EAX: 04000000 EBX: 00000ffc ECX: fffa6ff0 EDX: fffa6ff0 ESI: 04000000 EDI: fffa3000 EBP: df2008c0 ESP: dfa95cdc DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process modprobe (pid: 1385, ti=dfa94000 task=dee9ca90 task.ti=dfa94000) Stack: e0d28d38 def2dd60 04000000 10000000 e0d28ed3 04000000 def83800 00000300 <0> e0d2521c 00000001 df2008e8 dfa95d64 0000016b df2008c0 0000f4c7 0000015c <0> 00000023 e0d23f3d e0d6883d c1253e4b 0000015c dfa95d64 00000002 df2008c0 Call Trace: [] ? poke_fb+0x63/0x7b [nouveau] [] ? init_compute_mem+0x110/0x9f3 [nouveau] [] ? bios_wr32+0x64/0xc7 [nouveau] [] ? parse_init_table+0xc9/0x192 [nouveau] [] ? printk+0xe/0x13 [] ? nouveau_run_vbios_init+0x261/0x310 [nouveau] [] ? nouveau_bios_init+0x13d4/0x1708 [nouveau] [] ? nouveau_card_init+0xbbe/0xee2 [nouveau] [] ? nouveau_load+0x46e/0x4a6 [nouveau] [] ? drm_get_pci_dev+0x117/0x1e9 [] ? _raw_spin_lock_irqsave+0x11/0x2a [] ? local_pci_probe+0x34/0x74 [] ? pci_device_probe+0x41/0x63 [] ? driver_probe_device+0x8c/0x110 [] ? __driver_attach+0x40/0x5b [] ? bus_for_each_dev+0x37/0x5f [] ? driver_attach+0x11/0x13 [] ? __driver_attach+0x0/0x5b [] ? bus_add_driver+0x8c/0x1bf [] ? kset_find_obj+0x4f/0x56 [] ? nouveau_init+0x0/0x40 [nouveau] [] ? driver_register+0x7a/0xd9 [] ? nouveau_init+0x0/0x40 [nouveau] [] ? __pci_register_driver+0x33/0x89 [] ? nouveau_init+0x0/0x40 [nouveau] [] ? do_one_initcall+0x68/0x106 [] ? sys_init_module+0xbe2/0xdc7 [] ? sys_close+0x6b/0x9e [] ? sysenter_do_call+0x12/0x26 Code: 00 01 00 76 0d 25 ff ff 00 00 89 d7 89 c2 f3 6c eb 0c ba 01 67 2d c1 5b 5f e9 6d fe ff ff 5b 5f c3 89 d1 81 fa ff ff 03 00 76 03 <89> 02 c3 81 fa 00 00 01 00 76 08 81 e2 ff ff 00 00 ef c3 ba 16 EIP: [] iowrite32+0xa/0x29 SS:ESP 0068:dfa95cdc CR2: 00000000fffa6ff0 ---[ end trace 893c12fda0bab2d9 ]--- note: modprobe[1385] exited with preempt_count 1 BUG: scheduling while atomic: modprobe/1385/0x10000002 Modules linked in: snd_intel8x0(+) snd_ac97_codec nouveau(+) ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm ttm firewire_ohci snd_seq sg cb710_mmc uhci_hcd snd_timer firewire_core mmc_core drm_kms_helper sr_mod 8139too ehci_hcd snd_seq_device snd crc_itu_t usbcore cb710 ohci1394 cdrom 8139cp soundcore cfbcopyarea snd_page_alloc cfbimgblt ieee1394 intel_agp cfbfillrect battery ac btrfs crc32c libcrc32c sd_mod Pid: 1385, comm: modprobe Tainted: G D 2.6.36-rc2-git1 #81 Call Trace: [] ? schedule+0x9b/0x6b1 [] ? __cond_resched+0xf/0x19 [] ? _cond_resched+0x18/0x21 [] ? unmap_vmas+0x444/0x514 [] ? exit_mmap+0x99/0x130 [] ? mmput+0x20/0x94 ieee1394: Host added: ID:BUS[0-00:1023] GUID[00508b0880000a22] [] ? exit_mm+0xdf/0xe7 [] ? do_exit+0x180/0x562 [] ? _raw_spin_trylock+0xd/0x4e [] ? kmsg_dump+0x7f/0xf5 [] ? oops_end+0x72/0x75 [] ? no_context+0x10d/0x116 [] ? do_page_fault+0x0/0x2fc [] ? bad_area_nosemaphore+0xa/0xc [] ? do_page_fault+0x14c/0x2fc [] ? get_parent_ip+0x8/0x19 [] ? sub_preempt_count+0x74/0x80 [] ? _raw_spin_unlock+0xc/0x1f [] ? reserve_memtype+0x2e2/0x372 [] ? sub_preempt_count+0x74/0x80 [] ? schedule+0x689/0x6b1 [] ? get_parent_ip+0x8/0x19 [] ? do_page_fault+0x0/0x2fc [] ? error_code+0x5a/0x60 [] ? speedstep_get_freqs+0xd0/0x11e [] ? do_page_fault+0x0/0x2fc [] ? iowrite32+0xa/0x29 [] ? poke_fb+0x63/0x7b [nouveau] [] ? init_compute_mem+0x110/0x9f3 [nouveau] [] ? bios_wr32+0x64/0xc7 [nouveau] [] ? parse_init_table+0xc9/0x192 [nouveau] [] ? printk+0xe/0x13 [] ? nouveau_run_vbios_init+0x261/0x310 [nouveau] [] ? nouveau_bios_init+0x13d4/0x1708 [nouveau] [] ? nouveau_card_init+0xbbe/0xee2 [nouveau] [] ? nouveau_load+0x46e/0x4a6 [nouveau] [] ? drm_get_pci_dev+0x117/0x1e9 [] ? _raw_spin_lock_irqsave+0x11/0x2a [] ? local_pci_probe+0x34/0x74 [] ? pci_device_probe+0x41/0x63 [] ? driver_probe_device+0x8c/0x110 [] ? __driver_attach+0x40/0x5b [] ? bus_for_each_dev+0x37/0x5f [] ? driver_attach+0x11/0x13 [] ? __driver_attach+0x0/0x5b [] ? bus_add_driver+0x8c/0x1bf [] ? kset_find_obj+0x4f/0x56 [] ? nouveau_init+0x0/0x40 [nouveau] [] ? driver_register+0x7a/0xd9 [] ? nouveau_init+0x0/0x40 [nouveau] [] ? __pci_register_driver+0x33/0x89 [] ? nouveau_init+0x0/0x40 [nouveau] [] ? do_one_initcall+0x68/0x106 [] ? sys_init_module+0xbe2/0xdc7 [] ? sys_close+0x6b/0x9e [] ? sysenter_do_call+0x12/0x26 intel8x0_measure_ac97_clock: measured 53235 usecs (2565 samples) intel8x0: clocking to 48000 Adding 497976k swap on /dev/sda6. Priority:-1 extents:1 across:497976k EXT4-fs (sda5): re-mounted. Opts: (null) EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro EXT4-fs (sda9): mounted filesystem with writeback data mode. Opts: data=writeback EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) EXT4-fs (sda8): mounted filesystem with writeback data mode. Opts: data=writeback EXT4-fs (dm-1): mounted filesystem with writeback data mode. Opts: data=writeback EXT4-fs (dm-0): mounted filesystem with writeback data mode. Opts: data=writeback eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 fuse init (API version 7.15) RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] __mutex_lock_slowpath+0xa0/0x132 *pde = 00000000 Oops: 0002 [#2] PREEMPT SMP last sysfs file: /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/boot_vga Modules linked in: nfsd lockd nfs_acl auth_rpcgss sunrpc exportfs fuse snd_intel8x0 snd_ac97_codec nouveau(+) ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm ttm firewire_ohci snd_seq sg cb710_mmc uhci_hcd snd_timer firewire_core mmc_core drm_kms_helper sr_mod 8139too ehci_hcd snd_seq_device snd crc_itu_t usbcore cb710 ohci1394 cdrom 8139cp soundcore cfbcopyarea snd_page_alloc cfbimgblt ieee1394 intel_agp cfbfillrect battery ac btrfs crc32c libcrc32c sd_mod Pid: 2610, comm: Xorg Tainted: G D 2.6.36-rc2-git1 #81 0880/Pavilion zd7000 (DP761E#ABF) EIP: 0060:[] EFLAGS: 00013246 CPU: 0 EIP is at __mutex_lock_slowpath+0xa0/0x132 EAX: 00000000 EBX: def83a98 ECX: dedd2040 EDX: dcd5ff14 ESI: dedd2040 EDI: def83a9c EBP: def83aa0 ESP: dcd5ff10 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process Xorg (pid: 2610, ti=dcd5e000 task=dedd2040 task.ti=dcd5e000) Stack: c1169934 def83aa0 00000000 dedd2040 def83a98 de9a1100 def83a98 de9a1160 <0> c1254c5a de9a1124 de9a1100 c116f60c def83800 de9a1100 de9a115c c1168f8f <0> 00000000 def83a00 def839f8 00003246 deecea80 00000008 deb72238 df879c80 Call Trace: [] ? drm_gem_object_release_handle+0x0/0x24 [] ? mutex_lock+0x10/0x1d [] ? drm_fb_release+0x1b/0x63 [] ? drm_release+0x2b7/0x4ae [] ? fput+0xc6/0x167 [] ? filp_close+0x4e/0x54 [] ? sys_close+0x6b/0x9e [] ? sysenter_do_call+0x12/0x26 [] ? init_cyrix+0x97/0x3b4 Code: 75 0a 83 7e 18 63 7e 04 f3 90 eb 9e 8d 7b 04 89 f8 e8 d0 10 00 00 8d 6b 08 8b 43 0c 8d 54 24 04 89 53 0c 89 6c 24 04 89 44 24 08 <89> 10 89 74 24 0c 83 c8 ff 87 03 48 74 37 83 c8 ff 87 03 48 74 EIP: [] __mutex_lock_slowpath+0xa0/0x132 SS:ESP 0068:dcd5ff10 CR2: 0000000000000000 ---[ end trace 893c12fda0bab2da ]--- note: Xorg[2610] exited with preempt_count 2 BUG: scheduling while atomic: Xorg/2610/0x10000003 Modules linked in: nfsd lockd nfs_acl auth_rpcgss sunrpc exportfs fuse snd_intel8x0 snd_ac97_codec nouveau(+) ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm ttm firewire_ohci snd_seq sg cb710_mmc uhci_hcd snd_timer firewire_core mmc_core drm_kms_helper sr_mod 8139too ehci_hcd snd_seq_device snd crc_itu_t usbcore cb710 ohci1394 cdrom 8139cp soundcore cfbcopyarea snd_page_alloc cfbimgblt ieee1394 intel_agp cfbfillrect battery ac btrfs crc32c libcrc32c sd_mod Pid: 2610, comm: Xorg Tainted: G D 2.6.36-rc2-git1 #81 Call Trace: [] ? schedule+0x9b/0x6b1 [] ? __cond_resched+0xf/0x19 [] ? _cond_resched+0x18/0x21 [] ? unmap_vmas+0x444/0x514 [] ? exit_mmap+0x99/0x130 [] ? mmput+0x20/0x94 [] ? exit_mm+0xdf/0xe7 [] ? do_exit+0x180/0x562 [] ? _raw_spin_trylock+0xd/0x4e [] ? kmsg_dump+0x7f/0xf5 [] ? oops_end+0x72/0x75 [] ? no_context+0x10d/0x116 [] ? do_page_fault+0x0/0x2fc [] ? bad_area_nosemaphore+0xa/0xc [] ? do_page_fault+0x14c/0x2fc [] ? __do_softirq+0xbc/0xf1 [] ? do_IRQ+0x81/0x92 [] ? do_page_fault+0x0/0x2fc [] ? error_code+0x5a/0x60 [] ? do_page_fault+0x0/0x2fc [] ? __mutex_lock_slowpath+0xa0/0x132 [] ? drm_gem_object_release_handle+0x0/0x24 [] ? mutex_lock+0x10/0x1d [] ? drm_fb_release+0x1b/0x63 [] ? drm_release+0x2b7/0x4ae [] ? fput+0xc6/0x167 [] ? filp_close+0x4e/0x54 [] ? sys_close+0x6b/0x9e [] ? sysenter_do_call+0x12/0x26 [] ? init_cyrix+0x97/0x3b4 --3MwIy2ne0vdjdPXF Content-Type: text/plain; charset=utf-8 Content-Disposition: attachment; filename="ksymoops-2.6.36-rc2.git1" ksymoops 2.4.11 on i686 2.6.36-rc2-git1. Options used -V (default) -k /proc/ksyms (default) -l /proc/modules (default) -o /lib/modules/2.6.36-rc2-git1/ (default) -m /boot/System.map-2.6.36-rc2-git1 (default) Warning: You did not tell me where to find symbol information. I will assume that the log matches the kernel and modules that are running right now and I'll use the default options above for symbol resolution. If the current kernel and/or modules do not match the log, you can get more accurate output by telling me the kernel version and where to find map, modules, ksyms etc. ksymoops -h explains the options. Error (regular_file): read_ksyms stat /proc/ksyms failed No modules in ksyms, skipping objects No ksyms, skipping lsmod ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) 8139cp 0000:02:00.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too cb710 0000:02:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 cb710 0000:02:01.1: id 0, IO 0x00013c00, IRQ 18 ehci_hcd 0000:00:1d.7: debug port 1 8139too: 8139too Fast Ethernet driver 0.9.28 8139too 0000:02:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 8139too 0000:02:00.0: eth0: RealTek RTL8139 at 0x3000, 00:c0:9f:29:f7:ea, IRQ 20 BUG: unable to handle kernel paging request at fffa6ff0 *pde = 013b9067 *pte = 00000000 Oops: 0002 [#1] PREEMPT SMP Pid: 1385, comm: modprobe Not tainted 2.6.36-rc2-git1 #81 0880/Pavilion zd7000 (DP761E#ABF) EIP: 0060:[] EFLAGS: 00010292 CPU: 1 Using defaults from ksymoops -t elf32-i386 -a i386 EAX: 04000000 EBX: 00000ffc ECX: fffa6ff0 EDX: fffa6ff0 ESI: 04000000 EDI: fffa3000 EBP: df2008c0 ESP: dfa95cdc DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 e0d28d38 def2dd60 04000000 10000000 e0d28ed3 04000000 def83800 00000300 <0> e0d2521c 00000001 df2008e8 dfa95d64 0000016b df2008c0 0000f4c7 0000015c <0> 00000023 e0d23f3d e0d6883d c1253e4b 0000015c dfa95d64 00000002 df2008c0 Call Trace: [] ? poke_fb+0x63/0x7b [nouveau] [] ? init_compute_mem+0x110/0x9f3 [nouveau] [] ? bios_wr32+0x64/0xc7 [nouveau] [] ? parse_init_table+0xc9/0x192 [nouveau] [] ? printk+0xe/0x13 [] ? nouveau_run_vbios_init+0x261/0x310 [nouveau] [] ? nouveau_bios_init+0x13d4/0x1708 [nouveau] [] ? nouveau_card_init+0xbbe/0xee2 [nouveau] [] ? nouveau_load+0x46e/0x4a6 [nouveau] [] ? drm_get_pci_dev+0x117/0x1e9 [] ? _raw_spin_lock_irqsave+0x11/0x2a [] ? local_pci_probe+0x34/0x74 [] ? pci_device_probe+0x41/0x63 [] ? driver_probe_device+0x8c/0x110 [] ? __driver_attach+0x40/0x5b [] ? bus_for_each_dev+0x37/0x5f [] ? driver_attach+0x11/0x13 [] ? __driver_attach+0x0/0x5b [] ? bus_add_driver+0x8c/0x1bf [] ? kset_find_obj+0x4f/0x56 [] ? nouveau_init+0x0/0x40 [nouveau] [] ? driver_register+0x7a/0xd9 [] ? nouveau_init+0x0/0x40 [nouveau] [] ? __pci_register_driver+0x33/0x89 [] ? nouveau_init+0x0/0x40 [nouveau] [] ? do_one_initcall+0x68/0x106 [] ? sys_init_module+0xbe2/0xdc7 [] ? sys_close+0x6b/0x9e [] ? sysenter_do_call+0x12/0x26 Code: 00 01 00 76 0d 25 ff ff 00 00 89 d7 89 c2 f3 6c eb 0c ba 01 67 2d c1 5b 5f e9 6d fe ff ff 5b 5f c3 89 d1 81 fa ff ff 03 00 76 03 <89> 02 c3 81 fa 00 00 01 00 76 08 81 e2 ff ff 00 00 ef c3 ba 16 >>EIP; c1105185 <===== >>EAX; 04000000 >>ESI; 04000000 Trace; e0d28d38 Trace; e0d28ed3 Trace; e0d2521c Trace; e0d23f3d Trace; c1253e4b Trace; e0d2abf5 Trace; e0d2c078 Trace; e0d12611 Trace; e0d12da3 Trace; c116d997 Trace; c1255e09 <_raw_spin_lock_irqsave+11/2a> Trace; c110fa01 Trace; c11100c4 Trace; c1178451 Trace; c1178515 <__driver_attach+40/5b> Trace; c1177e66 Trace; c1178307 Trace; c11784d5 <__driver_attach+0/5b> Trace; c1177941 Trace; c10fcc63 Trace; e0d79000 Trace; c1178730 Trace; e0d79000 Trace; c1110296 <__pci_register_driver+33/89> Trace; e0d79000 Trace; c1001151 Trace; c1048c77 Trace; c10742ac Trace; c1002690 Code; c110515a 00000000 <_EIP>: Code; c110515a 0: 00 01 add %al,(%ecx) Code; c110515c 2: 00 76 0d add %dh,0xd(%esi) Code; c110515f 5: 25 ff ff 00 00 and $0xffff,%eax Code; c1105164 a: 89 d7 mov %edx,%edi Code; c1105166 c: 89 c2 mov %eax,%edx Code; c1105168 e: f3 6c rep insb (%dx),%es:(%edi) Code; c110516a 10: eb 0c jmp 1e <_EIP+0x1e> Code; c110516c 12: ba 01 67 2d c1 mov $0xc12d6701,%edx Code; c1105171 17: 5b pop %ebx Code; c1105172 18: 5f pop %edi Code; c1105173 19: e9 6d fe ff ff jmp fffffe8b <_EIP+0xfffffe8b> Code; c1105178 1e: 5b pop %ebx Code; c1105179 1f: 5f pop %edi Code; c110517a 20: c3 ret Code; c110517b 21: 89 d1 mov %edx,%ecx Code; c110517d 23: 81 fa ff ff 03 00 cmp $0x3ffff,%edx Code; c1105183 29: 76 03 jbe 2e <_EIP+0x2e> Code; c1105185 <===== 2b: 89 02 mov %eax,(%edx) <===== Code; c1105187 2d: c3 ret Code; c1105188 2e: 81 fa 00 00 01 00 cmp $0x10000,%edx Code; c110518e 34: 76 08 jbe 3e <_EIP+0x3e> Code; c1105190 36: 81 e2 ff ff 00 00 and $0xffff,%edx Code; c1105196 3c: ef out %eax,(%dx) Code; c1105197 3d: c3 ret Code; c1105198 3e: ba .byte 0xba Code; c1105199 3f: 16 push %ss EIP: [] iowrite32+0xa/0x29 SS:ESP 0068:dfa95cdc CR2: 00000000fffa6ff0 Pid: 1385, comm: modprobe Tainted: G D 2.6.36-rc2-git1 #81 Call Trace: [] ? schedule+0x9b/0x6b1 [] ? __cond_resched+0xf/0x19 [] ? _cond_resched+0x18/0x21 [] ? unmap_vmas+0x444/0x514 [] ? exit_mmap+0x99/0x130 [] ? mmput+0x20/0x94 [] ? exit_mm+0xdf/0xe7 [] ? do_exit+0x180/0x562 [] ? _raw_spin_trylock+0xd/0x4e [] ? kmsg_dump+0x7f/0xf5 [] ? oops_end+0x72/0x75 [] ? no_context+0x10d/0x116 [] ? do_page_fault+0x0/0x2fc [] ? bad_area_nosemaphore+0xa/0xc [] ? do_page_fault+0x14c/0x2fc [] ? get_parent_ip+0x8/0x19 [] ? sub_preempt_count+0x74/0x80 [] ? _raw_spin_unlock+0xc/0x1f [] ? reserve_memtype+0x2e2/0x372 [] ? sub_preempt_count+0x74/0x80 [] ? schedule+0x689/0x6b1 [] ? get_parent_ip+0x8/0x19 [] ? do_page_fault+0x0/0x2fc [] ? error_code+0x5a/0x60 [] ? speedstep_get_freqs+0xd0/0x11e [] ? do_page_fault+0x0/0x2fc [] ? iowrite32+0xa/0x29 [] ? poke_fb+0x63/0x7b [nouveau] [] ? init_compute_mem+0x110/0x9f3 [nouveau] [] ? bios_wr32+0x64/0xc7 [nouveau] [] ? parse_init_table+0xc9/0x192 [nouveau] [] ? printk+0xe/0x13 [] ? nouveau_run_vbios_init+0x261/0x310 [nouveau] [] ? nouveau_bios_init+0x13d4/0x1708 [nouveau] [] ? nouveau_card_init+0xbbe/0xee2 [nouveau] [] ? nouveau_load+0x46e/0x4a6 [nouveau] [] ? drm_get_pci_dev+0x117/0x1e9 [] ? _raw_spin_lock_irqsave+0x11/0x2a [] ? local_pci_probe+0x34/0x74 [] ? pci_device_probe+0x41/0x63 [] ? driver_probe_device+0x8c/0x110 [] ? __driver_attach+0x40/0x5b [] ? bus_for_each_dev+0x37/0x5f [] ? driver_attach+0x11/0x13 [] ? __driver_attach+0x0/0x5b [] ? bus_add_driver+0x8c/0x1bf [] ? kset_find_obj+0x4f/0x56 [] ? nouveau_init+0x0/0x40 [nouveau] [] ? driver_register+0x7a/0xd9 [] ? nouveau_init+0x0/0x40 [nouveau] [] ? __pci_register_driver+0x33/0x89 [] ? nouveau_init+0x0/0x40 [nouveau] [] ? do_one_initcall+0x68/0x106 [] ? sys_init_module+0xbe2/0xdc7 [] ? sys_close+0x6b/0x9e [] ? sysenter_do_call+0x12/0x26 Warning (Oops_read): Code line not seen, dumping what data is available >>EIP; c1105185 <===== Trace; c1254160 Trace; c1022222 <__cond_resched+f/19> Trace; c1254803 <_cond_resched+18/21> Trace; c106535e Trace; c10682d1 Trace; c1022b23 Trace; c1025d00 Trace; c102718c Trace; c1255e99 <_raw_spin_trylock+d/4e> Trace; c1025144 Trace; c1004e80 Trace; c1017bd1 Trace; c1017df1 Trace; c1017cd8 Trace; c1017f3d Trace; c101eea1 Trace; c101fabb Trace; c1255c11 <_raw_spin_unlock+c/1f> Trace; c1019bd3 Trace; c101fabb Trace; c125474e Trace; c101eea1 Trace; c1017df1 Trace; c12566a2 Trace; c101007b Trace; c1017df1 Trace; c1105185 Trace; e0d28d38 Trace; e0d28ed3 Trace; e0d2521c Trace; e0d23f3d Trace; c1253e4b Trace; e0d2abf5 Trace; e0d2c078 Trace; e0d12611 Trace; e0d12da3 Trace; c116d997 Trace; c1255e09 <_raw_spin_lock_irqsave+11/2a> Trace; c110fa01 Trace; c11100c4 Trace; c1178451 Trace; c1178515 <__driver_attach+40/5b> Trace; c1177e66 Trace; c1178307 Trace; c11784d5 <__driver_attach+0/5b> Trace; c1177941 Trace; c10fcc63 Trace; e0d79000 Trace; c1178730 Trace; e0d79000 Trace; c1110296 <__pci_register_driver+33/89> Trace; e0d79000 Trace; c1001151 Trace; c1048c77 Trace; c10742ac Trace; c1002690 BUG: unable to handle kernel NULL pointer dereference at (null) *pde = 00000000 Oops: 0002 [#2] PREEMPT SMP Pid: 2610, comm: Xorg Tainted: G D 2.6.36-rc2-git1 #81 0880/Pavilion zd7000 (DP761E#ABF) EIP: 0060:[] EFLAGS: 00013246 CPU: 0 EAX: 00000000 EBX: def83a98 ECX: dedd2040 EDX: dcd5ff14 ESI: dedd2040 EDI: def83a9c EBP: def83aa0 ESP: dcd5ff10 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 c1169934 def83aa0 00000000 dedd2040 def83a98 de9a1100 def83a98 de9a1160 <0> c1254c5a de9a1124 de9a1100 c116f60c def83800 de9a1100 de9a115c c1168f8f <0> 00000000 def83a00 def839f8 00003246 deecea80 00000008 deb72238 df879c80 Call Trace: [] ? drm_gem_object_release_handle+0x0/0x24 [] ? mutex_lock+0x10/0x1d [] ? drm_fb_release+0x1b/0x63 [] ? drm_release+0x2b7/0x4ae [] ? fput+0xc6/0x167 [] ? filp_close+0x4e/0x54 [] ? sys_close+0x6b/0x9e [] ? sysenter_do_call+0x12/0x26 [] ? init_cyrix+0x97/0x3b4 Code: 75 0a 83 7e 18 63 7e 04 f3 90 eb 9e 8d 7b 04 89 f8 e8 d0 10 00 00 8d 6b 08 8b 43 0c 8d 54 24 04 89 53 0c 89 6c 24 04 89 44 24 08 <89> 10 89 74 24 0c 83 c8 ff 87 03 48 74 37 83 c8 ff 87 03 48 74 >>EIP; c1254d67 <__mutex_lock_slowpath+a0/132> <===== Trace; c1169934 Trace; c1254c5a Trace; c116f60c Trace; c1168f8f Trace; c10768ee Trace; c107423b Trace; c10742ac Trace; c1002690 Trace; c1250000 Code; c1254d3c <__mutex_lock_slowpath+75/132> 00000000 <_EIP>: Code; c1254d3c <__mutex_lock_slowpath+75/132> 0: 75 0a jne c <_EIP+0xc> Code; c1254d3e <__mutex_lock_slowpath+77/132> 2: 83 7e 18 63 cmpl $0x63,0x18(%esi) Code; c1254d42 <__mutex_lock_slowpath+7b/132> 6: 7e 04 jle c <_EIP+0xc> Code; c1254d44 <__mutex_lock_slowpath+7d/132> 8: f3 90 pause Code; c1254d46 <__mutex_lock_slowpath+7f/132> a: eb 9e jmp ffffffaa <_EIP+0xffffffaa> Code; c1254d48 <__mutex_lock_slowpath+81/132> c: 8d 7b 04 lea 0x4(%ebx),%edi Code; c1254d4b <__mutex_lock_slowpath+84/132> f: 89 f8 mov %edi,%eax Code; c1254d4d <__mutex_lock_slowpath+86/132> 11: e8 d0 10 00 00 call 10e6 <_EIP+0x10e6> Code; c1254d52 <__mutex_lock_slowpath+8b/132> 16: 8d 6b 08 lea 0x8(%ebx),%ebp Code; c1254d55 <__mutex_lock_slowpath+8e/132> 19: 8b 43 0c mov 0xc(%ebx),%eax Code; c1254d58 <__mutex_lock_slowpath+91/132> 1c: 8d 54 24 04 lea 0x4(%esp),%edx Code; c1254d5c <__mutex_lock_slowpath+95/132> 20: 89 53 0c mov %edx,0xc(%ebx) Code; c1254d5f <__mutex_lock_slowpath+98/132> 23: 89 6c 24 04 mov %ebp,0x4(%esp) Code; c1254d63 <__mutex_lock_slowpath+9c/132> 27: 89 44 24 08 mov %eax,0x8(%esp) Code; c1254d67 <__mutex_lock_slowpath+a0/132> <===== 2b: 89 10 mov %edx,(%eax) <===== Code; c1254d69 <__mutex_lock_slowpath+a2/132> 2d: 89 74 24 0c mov %esi,0xc(%esp) Code; c1254d6d <__mutex_lock_slowpath+a6/132> 31: 83 c8 ff or $0xffffffff,%eax Code; c1254d70 <__mutex_lock_slowpath+a9/132> 34: 87 03 xchg %eax,(%ebx) Code; c1254d72 <__mutex_lock_slowpath+ab/132> 36: 48 dec %eax Code; c1254d73 <__mutex_lock_slowpath+ac/132> 37: 74 37 je 70 <_EIP+0x70> Code; c1254d75 <__mutex_lock_slowpath+ae/132> 39: 83 c8 ff or $0xffffffff,%eax Code; c1254d78 <__mutex_lock_slowpath+b1/132> 3c: 87 03 xchg %eax,(%ebx) Code; c1254d7a <__mutex_lock_slowpath+b3/132> 3e: 48 dec %eax Code; c1254d7b <__mutex_lock_slowpath+b4/132> 3f: 74 .byte 0x74 EIP: [] __mutex_lock_slowpath+0xa0/0x132 SS:ESP 0068:dcd5ff10 CR2: 0000000000000000 Pid: 2610, comm: Xorg Tainted: G D 2.6.36-rc2-git1 #81 Call Trace: [] ? schedule+0x9b/0x6b1 [] ? __cond_resched+0xf/0x19 [] ? _cond_resched+0x18/0x21 [] ? unmap_vmas+0x444/0x514 [] ? exit_mmap+0x99/0x130 [] ? mmput+0x20/0x94 [] ? exit_mm+0xdf/0xe7 [] ? do_exit+0x180/0x562 [] ? _raw_spin_trylock+0xd/0x4e [] ? kmsg_dump+0x7f/0xf5 [] ? oops_end+0x72/0x75 [] ? no_context+0x10d/0x116 [] ? do_page_fault+0x0/0x2fc [] ? bad_area_nosemaphore+0xa/0xc [] ? do_page_fault+0x14c/0x2fc [] ? __do_softirq+0xbc/0xf1 [] ? do_IRQ+0x81/0x92 [] ? do_page_fault+0x0/0x2fc [] ? error_code+0x5a/0x60 [] ? do_page_fault+0x0/0x2fc [] ? __mutex_lock_slowpath+0xa0/0x132 [] ? drm_gem_object_release_handle+0x0/0x24 [] ? mutex_lock+0x10/0x1d [] ? drm_fb_release+0x1b/0x63 [] ? drm_release+0x2b7/0x4ae [] ? fput+0xc6/0x167 [] ? filp_close+0x4e/0x54 [] ? sys_close+0x6b/0x9e [] ? sysenter_do_call+0x12/0x26 [] ? init_cyrix+0x97/0x3b4 Warning (Oops_read): Code line not seen, dumping what data is available >>EIP; c1254d67 <__mutex_lock_slowpath+a0/132> <===== Trace; c1254160 Trace; c1022222 <__cond_resched+f/19> Trace; c1254803 <_cond_resched+18/21> Trace; c106535e Trace; c10682d1 Trace; c1022b23 Trace; c1025d00 Trace; c102718c Trace; c1255e99 <_raw_spin_trylock+d/4e> Trace; c1025144 Trace; c1004e80 Trace; c1017bd1 Trace; c1017df1 Trace; c1017cd8 Trace; c1017f3d Trace; c102890b <__do_softirq+bc/f1> Trace; c1003b44 Trace; c1017df1 Trace; c12566a2 Trace; c1017df1 Trace; c1254d67 <__mutex_lock_slowpath+a0/132> Trace; c1169934 Trace; c1254c5a Trace; c116f60c Trace; c1168f8f Trace; c10768ee Trace; c107423b Trace; c10742ac Trace; c1002690 Trace; c1250000 3 warnings and 1 error issued. Results may not be reliable. --3MwIy2ne0vdjdPXF Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/dri-devel --3MwIy2ne0vdjdPXF--