Re: imx-ssi in master mode?

[Sascha Hauer <s.hauer@pengutronix.de>]

On Thu, Aug 26, 2010 at 05:23:53PM +0200, Sven Zeisberg wrote:
>   Hi
> 
> I found that the i.MX25 can not transfer multichannels frames through 
> SSI when it is set up as slave.
> (when the i.MX25 SSI is set up as slave, the SSI is set to "normal" mode 
> in which only one word per frame is transfered)
> 
> Now I'm wondering if anybody has successfully used a codec with the 
> i.MX25 SSI set up as Master. When we do this here, we can see that the 
> i.MX25 is generating the bit clock but no frame sync.

Master mode is currently not supported by the i.MX driver. You'd have to
implement the clk_get_rate functions for the ssi clocks first before
implementing the missing pieces in the driver.

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |