All of lore.kernel.org
 help / color / mirror / Atom feed
From: Florian Fainelli <florian@openwrt.org>
To: Willy Tarreau <w@1wt.eu>
Cc: David Brownell <david-b@pacbell.net>,
	linux-kernel@vger.kernel.org, akpm@linux-foundation.org,
	Samuel Ortiz <sameo@linux.intel.com>,
	Miguel Gaio <miguel.gaio@efixo.com>,
	Juhos Gabor <juhosg@openwrt.org>,
	David Brownell <dbrownell@users.sourceforge.net>
Subject: [PATCH v2] GPIO: add support for 74HC164 serial-in/parallel-out 8-bit shift register
Date: Sun, 29 Aug 2010 17:37:30 +0200	[thread overview]
Message-ID: <201008291737.32433.florian@openwrt.org> (raw)
In-Reply-To: <20100829101034.GB16004@1wt.eu>

Hi,

Here is the second version of the patch:
--
From: Miguel Gaio <miguel.gaio@efixo.com>

This patch adds support for generic 74HC164 serial-in/parallel-out 8-bits
shift register. This driver can be used as a GPIO output expander.

Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
Signed-off-by: Juhos Gabor <juhosg@openwrt.org>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
---
Changes since v1:
- renamed nxp_ to gen_ since this driver is generic to all 74HC164 chips
- added comment on this driver not handling the 74HC164 daisy-chaining
- renamed misused GPIO expanders to Shift registers

diff --git a/drivers/gpio/74hc164.c b/drivers/gpio/74hc164.c
new file mode 100644
index 0000000..fa63215
--- /dev/null
+++ b/drivers/gpio/74hc164.c
@@ -0,0 +1,228 @@
+/*
+ *  74HC164 - Serial-in/parallel-out 8-bits shift register GPIO driver
+ *
+ *  Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2010 Miguel Gaio <miguel.gaio@efixo.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ *  Note: this driver does not support the way 74HC164 chips can be
+ *  daisy-chained.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/bitops.h>
+#include <linux/platform_device.h>
+#include <linux/74hc164.h>
+
+#define GEN_74HC164_NUM_GPIOS	8
+
+struct gen_74hc164_chip {
+	struct device		*parent;
+	struct gpio_chip	gpio_chip;
+	struct mutex		lock;
+	long			mask;
+};
+
+static void gen_74hc164_set_value(struct gpio_chip *, unsigned, int);
+
+static struct gen_74hc164_chip *gpio_to_chip(struct gpio_chip *gc)
+{
+	return container_of(gc, struct gen_74hc164_chip, gpio_chip);
+}
+
+static int gen_74hc164_direction_input(struct gpio_chip *gc, unsigned offset)
+{
+	WARN_ON(1);
+	return -EINVAL;
+}
+
+static int gen_74hc164_direction_output(struct gpio_chip *gc,
+					unsigned offset, int val)
+{
+	gen_74hc164_set_value(gc, offset, val);
+	return 0;
+}
+
+static int gen_74hc164_get_value(struct gpio_chip *gc, unsigned offset)
+{
+	struct gen_74hc164_chip *chip = gpio_to_chip(gc);
+	int ret;
+
+	mutex_lock(&chip->lock);
+	ret = test_bit(offset, &chip->mask);
+	mutex_unlock(&chip->lock);
+
+	return ret;
+}
+
+static void gen_74hc164_set_value(struct gpio_chip *gc,
+				  unsigned offset, int val)
+{
+	struct gen_74hc164_chip *chip;
+	struct gen_74hc164_platform_data *pdata;
+	long mask;
+	int refresh;
+	int i;
+
+	chip = gpio_to_chip(gc);
+	pdata = chip->parent->platform_data;
+
+	mutex_lock(&chip->lock);
+	if (val)
+		refresh = (test_and_set_bit(offset, &chip->mask) != val);
+	else
+		refresh = (test_and_clear_bit(offset, &chip->mask) != val);
+
+	if (refresh) {
+		mask = chip->mask;
+		for (i = 8; i > 0; --i, mask <<= 1) {
+			gpio_set_value(pdata->gpio_pin_data, mask & 0x80);
+			gpio_set_value(pdata->gpio_pin_clk, 1);
+			gpio_set_value(pdata->gpio_pin_clk, 0);
+		}
+	}
+	mutex_unlock(&chip->lock);
+}
+
+static int __devinit gen_74hc164_probe(struct platform_device *pdev)
+{
+	struct gen_74hc164_platform_data *pdata;
+	struct gen_74hc164_chip *chip;
+	struct gpio_chip *gc;
+	int err;
+
+	pdata = pdev->dev.platform_data;
+	if (pdata == NULL) {
+		dev_dbg(&pdev->dev, "no platform data specified\n");
+		return -EINVAL;
+	}
+
+	chip = kzalloc(sizeof(struct gen_74hc164_chip), GFP_KERNEL);
+	if (chip == NULL) {
+		dev_err(&pdev->dev, "no memory for private data\n");
+		return -ENOMEM;
+	}
+
+	err = gpio_request(pdata->gpio_pin_clk, dev_name(&pdev->dev));
+	if (err) {
+		dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n",
+			pdata->gpio_pin_clk, err);
+		goto err_free_chip;
+	}
+
+	err = gpio_request(pdata->gpio_pin_data, dev_name(&pdev->dev));
+	if (err) {
+		dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n",
+			pdata->gpio_pin_data, err);
+		goto err_free_clk;
+	}
+
+	err = gpio_direction_output(pdata->gpio_pin_clk, 0);
+	if (err) {
+		dev_err(&pdev->dev,
+			"unable to set direction of gpio %u, err=%d\n",
+			pdata->gpio_pin_clk, err);
+		goto err_free_data;
+	}
+
+	err = gpio_direction_output(pdata->gpio_pin_data, 0);
+	if (err) {
+		dev_err(&pdev->dev,
+			"unable to set direction of gpio %u, err=%d\n",
+			pdata->gpio_pin_data, err);
+		goto err_free_data;
+	}
+
+	chip->parent = &pdev->dev;
+	mutex_init(&chip->lock);
+
+	gc = &chip->gpio_chip;
+
+	gc->direction_input  = gen_74hc164_direction_input;
+	gc->direction_output = gen_74hc164_direction_output;
+	gc->get = gen_74hc164_get_value;
+	gc->set = gen_74hc164_set_value;
+	gc->can_sleep = 1;
+
+	gc->base = pdata->gpio_base;
+	gc->ngpio = GEN_74HC164_NUM_GPIOS;
+	gc->label = dev_name(chip->parent);
+	gc->dev = chip->parent;
+	gc->owner = THIS_MODULE;
+
+	err = gpiochip_add(&chip->gpio_chip);
+	if (err) {
+		dev_err(&pdev->dev, "unable to add gpio chip, err=%d\n", err);
+		goto err_free_data;
+	}
+
+	platform_set_drvdata(pdev, chip);
+	return 0;
+
+err_free_data:
+	gpio_free(pdata->gpio_pin_data);
+err_free_clk:
+	gpio_free(pdata->gpio_pin_clk);
+err_free_chip:
+	kfree(chip);
+	return err;
+}
+
+static int gen_74hc164_remove(struct platform_device *pdev)
+{
+	struct gen_74hc164_chip *chip = platform_get_drvdata(pdev);
+	struct gen_74hc164_platform_data *pdata = pdev->dev.platform_data;
+
+	if (chip) {
+		int err;
+
+		err = gpiochip_remove(&chip->gpio_chip);
+		if (err) {
+			dev_err(&pdev->dev,
+				"unable to remove gpio chip, err=%d\n",
+				err);
+			return err;
+		}
+
+		gpio_free(pdata->gpio_pin_clk);
+		gpio_free(pdata->gpio_pin_data);
+
+		kfree(chip);
+		platform_set_drvdata(pdev, NULL);
+	}
+
+	return 0;
+}
+
+static struct platform_driver gen_74hc164_driver = {
+	.probe		= gen_74hc164_probe,
+	.remove		= __devexit_p(gen_74hc164_remove),
+	.driver = {
+		.name	= GEN_74HC164_DRIVER_NAME,
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init gen_74hc164_init(void)
+{
+	return platform_driver_register(&gen_74hc164_driver);
+}
+subsys_initcall(gen_74hc164_init);
+
+static void __exit gen_74hc164_exit(void)
+{
+	platform_driver_unregister(&gen_74hc164_driver);
+}
+module_exit(gen_74hc164_exit);
+
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_AUTHOR("Miguel Gaio <miguel.gaio@efixo.com>");
+MODULE_DESCRIPTION("GPIO expander driver for 74HC164 8-bits shift register");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" GEN_74HC164_DRIVER_NAME);
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 510aa20..ec27ab6 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -361,4 +361,13 @@ config GPIO_JANZ_TTL
 	  This driver provides support for driving the pins in output
 	  mode only. Input mode is not supported.
 
+comment "Shift registers:"
+
+config GPIO_74HC164
+       tristate "74HC164 serial-in/parallel-out 8-bit shift register"
+       help
+         Platform driver for 74HC164 serial-in/parallel-out 8-outputs shift
+	 registers. This driver can be used to provide access to more gpio
+	 outputs.
+
 endif
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index fc6019d..2fcb2b8 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_GPIO_MAX7301)	+= max7301.o
 obj-$(CONFIG_GPIO_MAX732X)	+= max732x.o
 obj-$(CONFIG_GPIO_MC33880)	+= mc33880.o
 obj-$(CONFIG_GPIO_MCP23S08)	+= mcp23s08.o
+obj-$(CONFIG_GPIO_74HC164)	+= 74hc164.o
 obj-$(CONFIG_GPIO_PCA953X)	+= pca953x.o
 obj-$(CONFIG_GPIO_PCF857X)	+= pcf857x.o
 obj-$(CONFIG_GPIO_PL061)	+= pl061.o
diff --git a/include/linux/74hc164.h b/include/linux/74hc164.h
new file mode 100644
index 0000000..dae3d46
--- /dev/null
+++ b/include/linux/74hc164.h
@@ -0,0 +1,22 @@
+/*
+ *  74HC164 - Serial-in/parallel-out 8-bits shift register
+ *
+ *  Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __74HC164_H
+#define __74HC164_H
+
+#define GEN_74HC164_DRIVER_NAME "74hc164"
+
+struct gen_74hc164_platform_data {
+	unsigned	gpio_base;
+	unsigned	gpio_pin_data;
+	unsigned	gpio_pin_clk;
+};
+
+#endif /* __74HC164_H */



  reply	other threads:[~2010-08-29 15:36 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-08-28 23:18 [PATCH] GPIO: add support for NXP 74HC164 GPIO expander David Brownell
2010-08-29 10:10 ` Willy Tarreau
2010-08-29 15:37   ` Florian Fainelli [this message]
2010-08-30 23:43     ` [PATCH v2] GPIO: add support for 74HC164 serial-in/parallel-out 8-bit shift register David Brownell
2010-08-31  8:17       ` Florian Fainelli
2010-08-31 10:44         ` [PATCH v3] GPIO: add support for 74x164 " Florian Fainelli
2010-09-01  7:25           ` Florian Fainelli
2010-09-01  9:37           ` [PATCH v4] " Florian Fainelli
2010-09-07  0:41             ` David Brownell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201008291737.32433.florian@openwrt.org \
    --to=florian@openwrt.org \
    --cc=akpm@linux-foundation.org \
    --cc=david-b@pacbell.net \
    --cc=dbrownell@users.sourceforge.net \
    --cc=juhosg@openwrt.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=miguel.gaio@efixo.com \
    --cc=sameo@linux.intel.com \
    --cc=w@1wt.eu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.