From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?iso-8859-1?Q?=22Lorna_Gonz=E1lez=22?= Date: Tue, 07 Sep 2010 20:19:22 +0200 Subject: [ath9k-devel] ath9k client/AP with Hostapd Message-ID: <20100907181922.115880@gmx.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org Hello, I am doing the same as in [ath9k-devel] ath9k as simultaneous AP/client but using wiphys. I am working with Linux kernel 2.6.34 and an atheros AR298x. Running hostapd works fine with the small test: interface=wlan1 driver=nl80211 hw_mode=g channel=1 ssid=test wpa=2 wpa_key_mgmt=WPA-PSK wpa_pairwise=CCMP wpa_passphrase=12345678 After I try to connect a station to the "test" AP, I got following: Mode: IEEE 802.11g Channel: 1 Frequency: 2412 MHz Using interface wlan1 with hwaddr 02:22:43:21:82:ac and ssid 'test' SSID - hexdump_ascii(len=4): 74 65 73 74 test PSK (ASCII passphrase) - hexdump_ascii(len=8): 31 32 33 34 35 36 37 38 12345678 PSK (from passphrase) - hexdump(len=32): fe 72 7a a8 b6 4a c9 b3 f5 4c 72 43 2d a1 4f ae d9 33 ea 51 1e ca b1 5b bc 6c 52 e7 52 2f 70 9a WPA: group state machine entering state GTK_INIT (VLAN-ID 0) GMK - hexdump(len=32): [REMOVED] GTK - hexdump(len=16): [REMOVED] WPA: group state machine entering state SETKEYSDONE (VLAN-ID 0) wlan1: Setup of interface done. MGMT (TX callback) ACK Malformed netlink message: len=432 left=256 plen=416 256 extra bytes in the end of netlink message STA 00:12:f0:b2:1b:0f sent probe request for broadcast SSID MGMT (TX callback) fail mgmt::proberesp cb STA 00:12:f0:b2:1b:0f sent probe request for broadcast SSID STA 00:12:f0:b2:1b:0f sent probe request for broadcast SSID STA 00:12:f0:b2:1b:0f sent probe request for broadcast SSID STA 00:12:f0:b2:1b:0f sent probe request for broadcast SSID MGMT (TX callback) fail mgmt::proberesp cb MGMT (TX callback) fail mgmt::proberesp cb MGMT (TX callback) fail mgmt::proberesp cb MGMT (TX callback) fail mgmt::proberesp cb MGMT mgmt::auth authentication: STA=00:12:f0:b2:1b:0f auth_alg=0 auth_transaction=1 status_code=0 wep=0 New STA wlan1: STA 00:12:f0:b2:1b:0f IEEE 802.11: authentication OK (open system) wlan1: STA 00:12:f0:b2:1b:0f MLME: MLME-AUTHENTICATE.indication(00:12:f0:b2:1b:0f, OPEN_SYSTEM) wlan1: STA 00:12:f0:b2:1b:0f MLME: MLME-DELETEKEYS.request(00:12:f0:b2:1b:0f) authentication reply: STA=00:12:f0:b2:1b:0f auth_alg=0 auth_transaction=2 resp=0 (IE len=0) MGMT (TX callback) ACK mgmt::auth cb wlan1: STA 00:12:f0:b2:1b:0f IEEE 802.11: authenticated MGMT mgmt::assoc_req association request: STA=00:12:f0:b2:1b:0f capab_info=0x411 listen_interval=10 new AID 1 wlan1: STA 00:12:f0:b2:1b:0f IEEE 802.11: association OK (aid 1) MGMT (TX callback) ACK mgmt::assoc_resp cb wlan1: STA 00:12:f0:b2:1b:0f IEEE 802.11: associated (aid 1) wlan1: STA 00:12:f0:b2:1b:0f MLME: MLME-ASSOCIATE.indication(00:12:f0:b2:1b:0f) wlan1: STA 00:12:f0:b2:1b:0f MLME: MLME-DELETEKEYS.request(00:12:f0:b2:1b:0f) wlan1: STA 00:12:f0:b2:1b:0f WPA: event 1 notification wlan1: STA 00:12:f0:b2:1b:0f WPA: start authentication WPA: 00:12:f0:b2:1b:0f WPA_PTK entering state INITIALIZE wlan1: STA 00:12:f0:b2:1b:0f IEEE 802.1X: unauthorizing port WPA: 00:12:f0:b2:1b:0f WPA_PTK_GROUP entering state IDLE WPA: 00:12:f0:b2:1b:0f WPA_PTK entering state AUTHENTICATION WPA: 00:12:f0:b2:1b:0f WPA_PTK entering state AUTHENTICATION2 WPA: 00:12:f0:b2:1b:0f WPA_PTK entering state INITPSK WPA: 00:12:f0:b2:1b:0f WPA_PTK entering state PTKSTART wlan1: STA 00:12:f0:b2:1b:0f WPA: sending 1/4 msg of 4-Way Handshake WPA: Send EAPOL(version=2 secure=0 mic=0 ack=1 install=0 pairwise=8 kde_len=0 keyidx=0 encr=0) IEEE 802.1X: 00:12:f0:b2:1b:0f TX status - version=2 type=3 length=95 - ack=1 wlan1: STA 00:12:f0:b2:1b:0f WPA: EAPOL-Key timeout WPA: 00:12:f0:b2:1b:0f WPA_PTK entering state PTKSTART wlan1: STA 00:12:f0:b2:1b:0f WPA: sending 1/4 msg of 4-Way Handshake WPA: Send EAPOL(version=2 secure=0 mic=0 ack=1 install=0 pairwise=8 kde_len=0 keyidx=0 encr=0) IEEE 802.1X: 00:12:f0:b2:1b:0f TX status - version=2 type=3 length=95 - ack=1 wlan1: STA 00:12:f0:b2:1b:0f WPA: EAPOL-Key timeout WPA: 00:12:f0:b2:1b:0f WPA_PTK entering state PTKSTART wlan1: STA 00:12:f0:b2:1b:0f WPA: sending 1/4 msg of 4-Way Handshake WPA: Send EAPOL(version=2 secure=0 mic=0 ack=1 install=0 pairwise=8 kde_len=0 keyidx=0 encr=0) IEEE 802.1X: 00:12:f0:b2:1b:0f TX status - version=2 type=3 length=95 - ack=1 IEEE 802.1X: 121 bytes from 00:12:f0:b2:1b:0f IEEE 802.1X: version=1 type=3 length=117 wlan1: STA 00:12:f0:b2:1b:0f WPA: received EAPOL-Key frame (2/4 Pairwise) WPA: 00:12:f0:b2:1b:0f WPA_PTK entering state PTKCALCNEGOTIATING WPA: PTK derivation - A1=02:22:43:21:82:ac A2=00:12:f0:b2:1b:0f WPA: PMK - hexdump(len=32): [REMOVED] WPA: PTK - hexdump(len=64): [REMOVED] WPA: 00:12:f0:b2:1b:0f WPA_PTK entering state PTKCALCNEGOTIATING2 WPA: 00:12:f0:b2:1b:0f WPA_PTK entering state PTKINITNEGOTIATING wlan1: STA 00:12:f0:b2:1b:0f WPA: sending 3/4 msg of 4-Way Handshake WPA: Send EAPOL(version=2 secure=1 mic=1 ack=1 install=1 pairwise=8 kde_len=46 keyidx=1 encr=1) Plaintext EAPOL-Key Key Data - hexdump(len=56): [REMOVED] IEEE 802.1X: 00:12:f0:b2:1b:0f TX status - version=2 type=3 length=151 - ack=1 IEEE 802.1X: 99 bytes from 00:12:f0:b2:1b:0f IEEE 802.1X: version=1 type=3 length=95 wlan1: STA 00:12:f0:b2:1b:0f WPA: received EAPOL-Key frame (4/4 Pairwise) WPA: 00:12:f0:b2:1b:0f WPA_PTK entering state PTKINITDONE wlan1: STA 00:12:f0:b2:1b:0f IEEE 802.1X: authorizing port wlan1: STA 00:12:f0:b2:1b:0f RADIUS: starting accounting session 4C866BA6-00000000 wlan1: STA 00:12:f0:b2:1b:0f WPA: pairwise key handshake completed (RSN) But after this the station can not longer communicate to the AP. Has someone an idea of what is missing?? thanks in advanced Lorna Glez. -- GMX DSL SOMMER-SPECIAL: Surf & Phone Flat 16.000 f?r nur 19,99 Euro/mtl.!* http://portal.gmx.net/de/go/dsl -- GMX DSL SOMMER-SPECIAL: Surf & Phone Flat 16.000 f?r nur 19,99 Euro/mtl.!* http://portal.gmx.net/de/go/dsl