All of lore.kernel.org
 help / color / mirror / Atom feed
From: Felix Blanke <felixblanke@gmail.com>
To: linux-btrfs@vger.kernel.org
Subject: btrfs and raid1 (restore)
Date: Wed, 8 Sep 2010 00:28:07 +0200	[thread overview]
Message-ID: <20100907222807.GA3546@scooter> (raw)

Hi,

I made a REALLY bad mistake today.

I've two hdds which are running at raid1 via btrfs. Today I mistyped a device-node
and did a "mkfs.vfat" on one of them.

Then I simply did a "btrfs filesystem balance /path/". "btrfs filesystem show /path/"
now looks like this:

Label: 'home1'  uuid: c3c38f32-f176-4479-8c44-e832ea64639f
    Total devices 2 FS bytes used 226.12GB
    devid    2 size 465.76GB used 114.38GB path /dev/loop3
    devid    1 size 465.76GB used 114.39GB path /dev/loop4


Before my mistake the "FS bytes used" were all three the same, now the bottom two are
only half of the size. Am I right that those devices didnt run in raid1 mode anymore?
:(


Is there a way, without copying back all data from my backup, to get those 2 running in
raid1 mode?
Or do I have to make a "mkfs.btrfs -m raid1 -d raid1 /dev/1", "btrfs device add /dev/2" and
"btrfs filesystem balance /path/"? :/ That would cost a lot of time.


Thanks for your help!


Regards,
Felix

             reply	other threads:[~2010-09-07 22:28 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-09-07 22:28 Felix Blanke [this message]
2010-09-08  0:46 ` btrfs and raid1 (restore) Jérôme Poulin
2010-09-08  6:43   ` Felix Blanke

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100907222807.GA3546@scooter \
    --to=felixblanke@gmail.com \
    --cc=linux-btrfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.