Re: [PATCH 3/3 v3] P4080/mtd: Fix the freescale lbc issue with 36bit mode

[Anton Vorontsov <cbouatmailru@gmail.com>]

On Thu, Sep 16, 2010 at 02:41:24PM +0800, Roy Zang wrote:
> From: Lan Chunhe-B25806 <b25806@freescale.com>
> 
> When system uses 36bit physical address, res.start is 36bit
> physical address. But the function of in_be32 returns 32bit
> physical address. Then both of them compared each other is
> wrong. So by converting the address of res.start into
> the right format fixes this issue.
> 
> Signed-off-by: Lan Chunhe-B25806 <b25806@freescale.com>
> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
> ---
>  arch/powerpc/include/asm/fsl_lbc.h |    1 +
>  arch/powerpc/sysdev/fsl_lbc.c      |   23 ++++++++++++++++++++++-
>  drivers/mtd/nand/fsl_elbc_nand.c   |    2 +-
>  3 files changed, 24 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h
> index db94698..5638b1e 100644
> --- a/arch/powerpc/include/asm/fsl_lbc.h
> +++ b/arch/powerpc/include/asm/fsl_lbc.h
> @@ -246,6 +246,7 @@ struct fsl_upm {
>  	int width;
>  };
>  
> +extern unsigned int fsl_lbc_addr(phys_addr_t addr_base);

u32 here.

Other than that, the patch looks good.

Reviewed-by: Anton Vorontsov <cbouatmailru@gmail.com>

Thanks!

-- 
Anton Vorontsov
email: cbouatmailru@gmail.com
irc://irc.freenode.net/bd2