[U-Boot] kernel does not boot

[Wolfgang Denk <wd@denx.de>]

Dear Mehmet Salih YILDIRIM,

In message <4C98640A.1060507@protel.tv> you wrote:
>
>   I am using TI's davinci board (microprocessor is dm6446) and I both 
> tried community u-boot build and I compiled myself. I try to boot kernel 
> from tftp and fs from nfs but I cannot mount fs. Here is errors:
> 
>     IP-Config: Got DHCP answer from 0.0.0.0, my address is 192.168.2.50
======================================^^^^^^^
>     IP-Config: Complete:
>           device=eth0, addr=192.168.2.50, mask=255.255.255.0,
>     gw=192.168.2.1,
>           host=192.168.2.50, domain=protel.local, nis-domain=(none),
>           bootserver=0.0.0.0, rootserver=0.0.0.0, rootpath=
>     Looking up port of RPC 100003/2 on 0.0.0.0
>     rpcbind: server 0.0.0.0 not responding, timed out
======================^^^^^^^

Seems your DHCP server is muisconfigured.

This is a Linux problem, not an U-Boot issue.

You are off topic here.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
What the gods would destroy they first submit to  an  IEEE  standards
committee.