From: Tony Lindgren <tony@atomide.com>
To: Jarkko Nikula <jhnikula@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org
Subject: Re: [PATCH 00/11] omap patches for review for v2.6.37 merge window
Date: Fri, 24 Sep 2010 11:12:09 -0700 [thread overview]
Message-ID: <20100924181209.GF4211@atomide.com> (raw)
In-Reply-To: <20100924085337.69c99bd8.jhnikula@gmail.com>
* Jarkko Nikula <jhnikula@gmail.com> [100923 22:45]:
> On Thu, 23 Sep 2010 18:50:38 -0700
> Tony Lindgren <tony@atomide.com> wrote:
>
> > Hi all,
> >
> > Here are some omap patches that have not yet been posted to
> > linux-arm-kernel for review.
> >
> > Jarkko Nikula (4):
> > omap: n8x0: Cleanup i2c1 and menelaus registration
> > omap: n8x0: Register i2c2 and add board info with tlv320aic3xfor N810
> > omap: n8x0: Mux i2s codec port pins for McBSP block
> > omap2: McBSP: Remove mux code for OMAP2420 McBSP2 and docleanups
> >
> ...
> > Subramaniam C.A (1):
> > omap: i2c: Avoid compilation error in case the header is included multiple times
> >
> Hmm... I wonder do I have something wrong or in patchwork but it looks
> like somehow a line feed gets introduced to subject line of some of
> my patches. And it seems to do with my patches only.
>
> Original patch in my mailbox or archive doesn't show it but it is in
> patchwork.
>
> http://marc.info/?l=linux-omap&m=128324955316265&w=2
> https://patchwork.kernel.org/patch/144841/mbox
Hmm yeah looks like patchwork wraps the subject line.. Need to look
to see where the bug is later on.
Here's the patch with fixed subject.
Tony
From: Jarkko Nikula <jhnikula@gmail.com>
Date: Tue, 31 Aug 2010 10:12:56 +0000
Subject: [PATCH] omap2: McBSP: Remove mux code for OMAP2420 McBSP2 and do cleanups
This 'legacy' OMAP2420 McBSP2 muxing code is currently broken after recent
conversion to new mux code. The omap_mcbsp_request calling this code is
usually called after booting whereas the omap_mux_init_signal is __init
marked so null pointer dereference would occur.
Fix this by removing the muxing code and let the bootloader or board file to
do it if necessary. Remove also omap2_mcbsp_ops as there is no use for it.
Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 467aae2..88b8790 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -23,29 +23,6 @@
#include <plat/cpu.h>
#include <plat/mcbsp.h>
-#include "mux.h"
-
-static void omap2_mcbsp2_mux_setup(void)
-{
- omap_mux_init_signal("eac_ac_sclk.mcbsp2_clkx", OMAP_PULL_ENA);
- omap_mux_init_signal("eac_ac_fs.mcbsp2_fsx", OMAP_PULL_ENA);
- omap_mux_init_signal("eac_ac_din.mcbsp2_dr", OMAP_PULL_ENA);
- omap_mux_init_signal("eac_ac_dout.mcbsp2_dx", OMAP_PULL_ENA);
- omap_mux_init_gpio(117, OMAP_PULL_ENA);
- /*
- * TODO: Need to add MUX settings for OMAP 2430 SDP
- */
-}
-
-static void omap2_mcbsp_request(unsigned int id)
-{
- if (cpu_is_omap2420() && (id == OMAP_MCBSP2))
- omap2_mcbsp2_mux_setup();
-}
-
-static struct omap_mcbsp_ops omap2_mcbsp_ops = {
- .request = omap2_mcbsp_request,
-};
#ifdef CONFIG_ARCH_OMAP2420
static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = {
@@ -55,7 +32,6 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX,
.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
.tx_irq = INT_24XX_MCBSP1_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP24XX_MCBSP2_BASE,
@@ -63,7 +39,6 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX,
.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
.tx_irq = INT_24XX_MCBSP2_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
},
};
#define OMAP2420_MCBSP_PDATA_SZ ARRAY_SIZE(omap2420_mcbsp_pdata)
@@ -82,7 +57,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX,
.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
.tx_irq = INT_24XX_MCBSP1_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP24XX_MCBSP2_BASE,
@@ -90,7 +64,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX,
.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
.tx_irq = INT_24XX_MCBSP2_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP2430_MCBSP3_BASE,
@@ -98,7 +71,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP3_TX,
.rx_irq = INT_24XX_MCBSP3_IRQ_RX,
.tx_irq = INT_24XX_MCBSP3_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP2430_MCBSP4_BASE,
@@ -106,7 +78,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP4_TX,
.rx_irq = INT_24XX_MCBSP4_IRQ_RX,
.tx_irq = INT_24XX_MCBSP4_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP2430_MCBSP5_BASE,
@@ -114,7 +85,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP5_TX,
.rx_irq = INT_24XX_MCBSP5_IRQ_RX,
.tx_irq = INT_24XX_MCBSP5_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
},
};
#define OMAP2430_MCBSP_PDATA_SZ ARRAY_SIZE(omap2430_mcbsp_pdata)
@@ -133,7 +103,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX,
.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
.tx_irq = INT_24XX_MCBSP1_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
.buffer_size = 0x80, /* The FIFO has 128 locations */
},
{
@@ -143,7 +112,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX,
.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
.tx_irq = INT_24XX_MCBSP2_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
.buffer_size = 0x500, /* The FIFO has 1024 + 256 locations */
},
{
@@ -153,7 +121,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP3_TX,
.rx_irq = INT_24XX_MCBSP3_IRQ_RX,
.tx_irq = INT_24XX_MCBSP3_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
.buffer_size = 0x80, /* The FIFO has 128 locations */
},
{
@@ -162,7 +129,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP4_TX,
.rx_irq = INT_24XX_MCBSP4_IRQ_RX,
.tx_irq = INT_24XX_MCBSP4_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
.buffer_size = 0x80, /* The FIFO has 128 locations */
},
{
@@ -171,7 +137,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP5_TX,
.rx_irq = INT_24XX_MCBSP5_IRQ_RX,
.tx_irq = INT_24XX_MCBSP5_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
.buffer_size = 0x80, /* The FIFO has 128 locations */
},
};
@@ -189,28 +154,24 @@ static struct omap_mcbsp_platform_data omap44xx_mcbsp_pdata[] = {
.dma_rx_sync = OMAP44XX_DMA_MCBSP1_RX,
.dma_tx_sync = OMAP44XX_DMA_MCBSP1_TX,
.tx_irq = OMAP44XX_IRQ_MCBSP1,
- .ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP44XX_MCBSP2_BASE,
.dma_rx_sync = OMAP44XX_DMA_MCBSP2_RX,
.dma_tx_sync = OMAP44XX_DMA_MCBSP2_TX,
.tx_irq = OMAP44XX_IRQ_MCBSP2,
- .ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP44XX_MCBSP3_BASE,
.dma_rx_sync = OMAP44XX_DMA_MCBSP3_RX,
.dma_tx_sync = OMAP44XX_DMA_MCBSP3_TX,
.tx_irq = OMAP44XX_IRQ_MCBSP3,
- .ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP44XX_MCBSP4_BASE,
.dma_rx_sync = OMAP44XX_DMA_MCBSP4_RX,
.dma_tx_sync = OMAP44XX_DMA_MCBSP4_TX,
.tx_irq = OMAP44XX_IRQ_MCBSP4,
- .ops = &omap2_mcbsp_ops,
},
};
#define OMAP44XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap44xx_mcbsp_pdata)
WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 00/11] omap patches for review for v2.6.37 merge window
Date: Fri, 24 Sep 2010 11:12:09 -0700 [thread overview]
Message-ID: <20100924181209.GF4211@atomide.com> (raw)
In-Reply-To: <20100924085337.69c99bd8.jhnikula@gmail.com>
* Jarkko Nikula <jhnikula@gmail.com> [100923 22:45]:
> On Thu, 23 Sep 2010 18:50:38 -0700
> Tony Lindgren <tony@atomide.com> wrote:
>
> > Hi all,
> >
> > Here are some omap patches that have not yet been posted to
> > linux-arm-kernel for review.
> >
> > Jarkko Nikula (4):
> > omap: n8x0: Cleanup i2c1 and menelaus registration
> > omap: n8x0: Register i2c2 and add board info with tlv320aic3xfor N810
> > omap: n8x0: Mux i2s codec port pins for McBSP block
> > omap2: McBSP: Remove mux code for OMAP2420 McBSP2 and docleanups
> >
> ...
> > Subramaniam C.A (1):
> > omap: i2c: Avoid compilation error in case the header is included multiple times
> >
> Hmm... I wonder do I have something wrong or in patchwork but it looks
> like somehow a line feed gets introduced to subject line of some of
> my patches. And it seems to do with my patches only.
>
> Original patch in my mailbox or archive doesn't show it but it is in
> patchwork.
>
> http://marc.info/?l=linux-omap&m=128324955316265&w=2
> https://patchwork.kernel.org/patch/144841/mbox
Hmm yeah looks like patchwork wraps the subject line.. Need to look
to see where the bug is later on.
Here's the patch with fixed subject.
Tony
From: Jarkko Nikula <jhnikula@gmail.com>
Date: Tue, 31 Aug 2010 10:12:56 +0000
Subject: [PATCH] omap2: McBSP: Remove mux code for OMAP2420 McBSP2 and do cleanups
This 'legacy' OMAP2420 McBSP2 muxing code is currently broken after recent
conversion to new mux code. The omap_mcbsp_request calling this code is
usually called after booting whereas the omap_mux_init_signal is __init
marked so null pointer dereference would occur.
Fix this by removing the muxing code and let the bootloader or board file to
do it if necessary. Remove also omap2_mcbsp_ops as there is no use for it.
Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 467aae2..88b8790 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -23,29 +23,6 @@
#include <plat/cpu.h>
#include <plat/mcbsp.h>
-#include "mux.h"
-
-static void omap2_mcbsp2_mux_setup(void)
-{
- omap_mux_init_signal("eac_ac_sclk.mcbsp2_clkx", OMAP_PULL_ENA);
- omap_mux_init_signal("eac_ac_fs.mcbsp2_fsx", OMAP_PULL_ENA);
- omap_mux_init_signal("eac_ac_din.mcbsp2_dr", OMAP_PULL_ENA);
- omap_mux_init_signal("eac_ac_dout.mcbsp2_dx", OMAP_PULL_ENA);
- omap_mux_init_gpio(117, OMAP_PULL_ENA);
- /*
- * TODO: Need to add MUX settings for OMAP 2430 SDP
- */
-}
-
-static void omap2_mcbsp_request(unsigned int id)
-{
- if (cpu_is_omap2420() && (id == OMAP_MCBSP2))
- omap2_mcbsp2_mux_setup();
-}
-
-static struct omap_mcbsp_ops omap2_mcbsp_ops = {
- .request = omap2_mcbsp_request,
-};
#ifdef CONFIG_ARCH_OMAP2420
static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = {
@@ -55,7 +32,6 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX,
.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
.tx_irq = INT_24XX_MCBSP1_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP24XX_MCBSP2_BASE,
@@ -63,7 +39,6 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX,
.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
.tx_irq = INT_24XX_MCBSP2_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
},
};
#define OMAP2420_MCBSP_PDATA_SZ ARRAY_SIZE(omap2420_mcbsp_pdata)
@@ -82,7 +57,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX,
.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
.tx_irq = INT_24XX_MCBSP1_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP24XX_MCBSP2_BASE,
@@ -90,7 +64,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX,
.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
.tx_irq = INT_24XX_MCBSP2_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP2430_MCBSP3_BASE,
@@ -98,7 +71,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP3_TX,
.rx_irq = INT_24XX_MCBSP3_IRQ_RX,
.tx_irq = INT_24XX_MCBSP3_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP2430_MCBSP4_BASE,
@@ -106,7 +78,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP4_TX,
.rx_irq = INT_24XX_MCBSP4_IRQ_RX,
.tx_irq = INT_24XX_MCBSP4_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP2430_MCBSP5_BASE,
@@ -114,7 +85,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP5_TX,
.rx_irq = INT_24XX_MCBSP5_IRQ_RX,
.tx_irq = INT_24XX_MCBSP5_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
},
};
#define OMAP2430_MCBSP_PDATA_SZ ARRAY_SIZE(omap2430_mcbsp_pdata)
@@ -133,7 +103,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX,
.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
.tx_irq = INT_24XX_MCBSP1_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
.buffer_size = 0x80, /* The FIFO has 128 locations */
},
{
@@ -143,7 +112,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX,
.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
.tx_irq = INT_24XX_MCBSP2_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
.buffer_size = 0x500, /* The FIFO has 1024 + 256 locations */
},
{
@@ -153,7 +121,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP3_TX,
.rx_irq = INT_24XX_MCBSP3_IRQ_RX,
.tx_irq = INT_24XX_MCBSP3_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
.buffer_size = 0x80, /* The FIFO has 128 locations */
},
{
@@ -162,7 +129,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP4_TX,
.rx_irq = INT_24XX_MCBSP4_IRQ_RX,
.tx_irq = INT_24XX_MCBSP4_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
.buffer_size = 0x80, /* The FIFO has 128 locations */
},
{
@@ -171,7 +137,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP5_TX,
.rx_irq = INT_24XX_MCBSP5_IRQ_RX,
.tx_irq = INT_24XX_MCBSP5_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
.buffer_size = 0x80, /* The FIFO has 128 locations */
},
};
@@ -189,28 +154,24 @@ static struct omap_mcbsp_platform_data omap44xx_mcbsp_pdata[] = {
.dma_rx_sync = OMAP44XX_DMA_MCBSP1_RX,
.dma_tx_sync = OMAP44XX_DMA_MCBSP1_TX,
.tx_irq = OMAP44XX_IRQ_MCBSP1,
- .ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP44XX_MCBSP2_BASE,
.dma_rx_sync = OMAP44XX_DMA_MCBSP2_RX,
.dma_tx_sync = OMAP44XX_DMA_MCBSP2_TX,
.tx_irq = OMAP44XX_IRQ_MCBSP2,
- .ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP44XX_MCBSP3_BASE,
.dma_rx_sync = OMAP44XX_DMA_MCBSP3_RX,
.dma_tx_sync = OMAP44XX_DMA_MCBSP3_TX,
.tx_irq = OMAP44XX_IRQ_MCBSP3,
- .ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP44XX_MCBSP4_BASE,
.dma_rx_sync = OMAP44XX_DMA_MCBSP4_RX,
.dma_tx_sync = OMAP44XX_DMA_MCBSP4_TX,
.tx_irq = OMAP44XX_IRQ_MCBSP4,
- .ops = &omap2_mcbsp_ops,
},
};
#define OMAP44XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap44xx_mcbsp_pdata)
next prev parent reply other threads:[~2010-09-24 18:12 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-24 1:50 [PATCH 00/11] omap patches for review for v2.6.37 merge window Tony Lindgren
2010-09-24 1:50 ` Tony Lindgren
2010-09-24 1:50 ` [PATCH 01/11] omap2: fix assorted compiler warnings Tony Lindgren
2010-09-24 1:50 ` Tony Lindgren
2010-09-24 1:50 ` [PATCH 02/11] omap: n8x0: Cleanup i2c1 and menelaus registration Tony Lindgren
2010-09-24 1:50 ` Tony Lindgren
2010-09-24 1:50 ` [PATCH 03/11] omap: n8x0: Register i2c2 and add board info with tlv320aic3xfor N810 Tony Lindgren
2010-09-24 1:50 ` Tony Lindgren
2010-09-24 1:50 ` [PATCH 04/11] omap: n8x0: Mux i2s codec port pins for McBSP block Tony Lindgren
2010-09-24 1:50 ` Tony Lindgren
2010-09-24 1:50 ` [PATCH 05/11] omap3: Remove non-existent config option Tony Lindgren
2010-09-24 1:50 ` Tony Lindgren
2010-09-24 10:00 ` Felipe Contreras
2010-09-24 10:00 ` Felipe Contreras
2010-09-24 15:17 ` Premi, Sanjeev
2010-09-24 15:17 ` Premi, Sanjeev
2010-09-25 15:42 ` Felipe Contreras
2010-09-25 15:42 ` Felipe Contreras
2010-09-27 11:02 ` Marathe, Yogesh
2010-09-27 11:02 ` Marathe, Yogesh
2010-09-27 15:56 ` Felipe Contreras
2010-09-27 15:56 ` Felipe Contreras
2010-09-27 16:24 ` Tony Lindgren
2010-09-27 16:24 ` Tony Lindgren
2010-09-27 16:28 ` Kanigeri, Hari
2010-09-27 16:28 ` Kanigeri, Hari
2010-09-29 11:34 ` Felipe Contreras
2010-09-29 11:34 ` Felipe Contreras
2010-09-29 13:28 ` Marathe, Yogesh
2010-09-29 13:28 ` Marathe, Yogesh
2010-09-29 19:12 ` Felipe Contreras
2010-09-29 19:12 ` Felipe Contreras
2010-10-01 11:29 ` Marathe, Yogesh
2010-10-01 11:29 ` Marathe, Yogesh
2010-10-06 0:14 ` Guzman Lugo, Fernando
2010-10-06 0:14 ` Guzman Lugo, Fernando
2010-10-06 8:31 ` Marathe, Yogesh
2010-10-06 8:31 ` Marathe, Yogesh
2010-10-10 14:07 ` Felipe Contreras
2010-10-10 14:07 ` Felipe Contreras
2010-10-11 5:10 ` Marathe, Yogesh
2010-10-11 5:10 ` Marathe, Yogesh
2010-09-24 1:50 ` [PATCH 06/11] omap: usb: fix build warning Tony Lindgren
2010-09-24 1:50 ` Tony Lindgren
2010-09-24 1:51 ` [PATCH 07/11] omap: crypto: updates to enable omap aes Tony Lindgren
2010-09-24 1:51 ` Tony Lindgren
2010-09-24 1:51 ` [PATCH 08/11] omap: i2c: Avoid compilation error in case the header is included multiple times Tony Lindgren
2010-09-24 1:51 ` Tony Lindgren
2010-09-24 1:51 ` [PATCH 09/11] omap: McBSP: Do not enable SRG in slave mode Tony Lindgren
2010-09-24 1:51 ` Tony Lindgren
2010-09-24 1:51 ` [PATCH 10/11] omap2: McBSP: Remove mux code for OMAP2420 McBSP2 and docleanups Tony Lindgren
2010-09-24 1:51 ` Tony Lindgren
2010-09-24 1:51 ` [PATCH 11/11] omap: mmc: extended to pass host capabilities from board file Tony Lindgren
2010-09-24 1:51 ` Tony Lindgren
2010-09-24 5:53 ` [PATCH 00/11] omap patches for review for v2.6.37 merge window Jarkko Nikula
2010-09-24 5:53 ` Jarkko Nikula
2010-09-24 18:12 ` Tony Lindgren [this message]
2010-09-24 18:12 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100924181209.GF4211@atomide.com \
--to=tony@atomide.com \
--cc=jhnikula@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.