From: Jon Masters <jonathan@jonmasters.org>
To: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>,
Henry Ptasinski <henryp@broadcom.com>,
Nohee Ko <noheek@broadcom.com>, Jon Masters <jcm@jonmasters.org>,
LKML <linux-kernel@vger.kernel.org>
Subject: PROBLEM: brcm80211 hangs on 2.6.36-0.34.rc6.git3.fc15.x86_64
Date: Fri, 8 Oct 2010 02:58:11 -0400 [thread overview]
Message-ID: <20101008065810.GA1680@constitution.bos.jonmasters.org> (raw)
Folks,
I tried building the new brcm80211 driver from staging-next on Fedora rawhide
kernel 2.6.36-0.34.rc6.git3.fc15.x86_64. Now, of course, it's not the
staging-next kernel (I'll try that now this doesn't work) but perhaps this
report will still be of use to the Broadcom/other wireless folks.
After loading the module, the system hangs soon thereafter and does not respond
to any sysrq. I tried setting panic_on_oops and configuring kdump but I can't
get the system to panic in any case, and setting pause_on_oops doesn't give me
enough output, either. So the best I have at this time of night is the output
from a netconsole, which actually seems to work well enough (I don't see any
further output on the console itself).
This is happening on a brand new ASUS Eee PC 1015PEM netbook, which contains
the following Broadcom part:
02:00.0 0280: 14e4:4727 (rev 01)
Subsystem: 1a3b:2047
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at fbffc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [58] Vendor Specific Information: Len=78 <?>
Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [d0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [13c] Virtual Channel
Capabilities: [160] Device Serial Number XX-XX-XX-XX-XX-XX-XX-XX
Capabilities: [16c] Power Budgeting <?>
Kernel modules: brcm80211
The firmware files have been installed correctly also. I will poke some
more, trying a pure upstream Linus tree and next-staging next, and I am
happy to try patches sent to me and let folks know what happens.
Jon.
--- output from netconsole ---
[ 366.771940] console [netcon0] enabled
[ 366.774936] netconsole: network logging started
[ 392.980995] wl_pci_probe: bus 2 slot 0 func 0 irq 10
[ 392.984887] brcm80211 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 392.988883] brcm80211 0000:02:00.0: setting latency timer to 64
[ 392.993356] PCI/DMA
[ 393.122108] wlc_protection_upd: idx 2, val -1
[ 393.126243] wlc_protection_upd: idx 1, val 0
[ 393.130048] wlc_protection_upd: idx 12, val -1
[ 393.133375] wlc_protection_upd: idx 11, val 0
[ 393.137747] wlc_protection_upd: idx 14, val -1
[ 393.142379] wlc_protection_upd: idx 13, val 0
[ 393.146843] wlc_protection_upd: idx 15, val -1
[ 393.151222] wlc_protection_upd: idx 4, val 2
[ 393.155321] wl0: wlc_bmac_attach: vendor 0x14e4 device 0x4727
[ 393.159746] Found chip type AI (0x13814313)
[ 393.170595] Changing max_res_mask to 0xffff
[ 393.174493] Changing min_res_mask to 0x200d
[ 393.184581] Applying 4313 WARs
[ 393.188558] wl0: wlc_bmac_corereset
[ 393.192948] wl0: wlc_bmac_phy_reset
[ 393.196628] wl0: wlc_bmac_core_phypll_ctl
[ 393.200378] wl0: validate_chip_access
[ 393.204171] wl0: wlc_setxband: bandunit 0
[ 393.207939] wl0: wlc_bmac_corereset
[ 393.211729] wl0: wlc_bmac_phy_reset
[ 393.215377] wl0: wlc_bmac_core_phypll_ctl
[ 393.219456] wl0: dma_attach: DMA64 osh ffff88007a9c9738 flags 0x0 ntxd 256 nrxd 256 rxbufsize 2048 rxextheadroom -1 nrxpost 32 rxoffset 38 dmaregstx ffffc90023788200 dmaregsrx ffffc90023788220
[ 393.227474] ddoffsetlow 0x0 ddoffsethigh 0x80000000 dataoffsetlow 0x0 dataoffsethigh 0x80000000 addrext 1
[ 393.231906] wl0: dma_attach: DMA64 osh ffff88007a9c9738 flags 0x0 ntxd 256 nrxd 0 rxbufsize 0 rxextheadroom -1 nrxpost 0 rxoffset 0 dmaregstx ffffc90023788240 dmaregsrx (null)
[ 393.240982] ddoffsetlow 0x0 ddoffsethigh 0x80000000 dataoffsetlow 0x0 dataoffsethigh 0x80000000 addrext 1
[ 393.246000] wl0: dma_attach: DMA64 osh ffff88007a9c9738 flags 0x0 ntxd 256 nrxd 0 rxbufsize 0 rxextheadroom -1 nrxpost 0 rxoffset 0 dmaregstx ffffc90023788280 dmaregsrx (null)
[ 393.255802] ddoffsetlow 0x0 ddoffsethigh 0x80000000 dataoffsetlow 0x0 dataoffsethigh 0x80000000 addrext 1
[ 393.260887] wl0: dma_attach: DMA64 osh ffff88007a9c9738 flags 0x0 ntxd 256 nrxd 0 rxbufsize 0 rxextheadroom -1 nrxpost 0 rxoffset 0 dmaregstx ffffc900237882c0 dmaregsrx (null)
[ 393.270665] ddoffsetlow 0x0 ddoffsethigh 0x80000000 dataoffsetlow 0x0 dataoffsethigh 0x80000000 addrext 1
[ 393.275879] wl0: wlc_coredisable
[ 393.281137] wl0: wlc_bmac_core_phypll_ctl
[ 393.286282] wl0: wlc_bmac_xtal: want 0
[ 393.291265] wlc_protection_upd: idx 15, val -1
[ 393.296230] wlc_bmac_copyfrom_vars, nvram vars totlen=2299
[ 393.301390] wl0: wlc_stf_spatial_policy_set: val 0
[ 393.306505] wl0: wlc_stf_txcore_set: Nsts 1 core_mask 1
[ 393.311730] wl0: wlc_stf_txcore_set: Nsts 2 core_mask 3
[ 393.316921] wl0: wlc_stf_txcore_set: Nsts 3 core_mask 7
[ 393.322211] wl0: wlc_stf_txcore_set: Nsts 4 core_mask f
[ 393.327403] wlc_protection_upd: idx 3, val 1
[ 393.332647] wlc_protection_upd: idx 10, val 1
[ 393.337935] wl0: wlc_channel_mgr_attach
[ 393.343153] wlc_protection_upd: idx 3, val 1
[ 393.348767] wl0: wlc_doiovar
[ 393.352219] wl0: wlc_doiovar: id 1
[ 393.568224] phy0: Selected rate control algorithm 'minstrel_ht'
[ 393.600350] (Compiled in . at 23:27:00 on Oct 7 2010)
[ 393.605803] cfg80211: Calling CRDA for country: US
[ 393.713588] cfg80211: Regulatory domain changed to country: US
[ 393.718232] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 393.722941] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 393.727656] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 393.728696] wl0: wlc_up:
[ 393.728821] wl0: wlc_bmac_hw_up:
[ 393.728829] wl0: wlc_bmac_xtal: want 1
[ 393.728931] wl0: wlc_bmac_up_prep:
[ 393.728938] wl0: wlc_bmac_xtal: want 1
[ 393.729119] wl0: wlc_bmac_xtal: want 0
[ 393.729597] wl0: wlc_doiovar
[ 393.729605] wl0: wlc_doiovar: id 3
[ 393.729613] wl0: wlc_doiovar
[ 393.729619] wl0: wlc_doiovar: id 3
[ 393.729626] wl0: wlc_doiovar
[ 393.729632] wl0: wlc_doiovar: id 2
[ 393.729640] wl0: wlc_doiovar
[ 393.729647] wl0: wlc_doiovar: id 2
[ 393.735224] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 393.775787] (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 393.777961] (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 393.780242] (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 393.782427] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 393.972913] ------------[ cut here ]------------
[ 393.976695] WARNING: at net/mac80211/tx.c:1464 ieee80211_tx+0x1f2/0x225 [mac80211]()
[ 393.980693] Hardware name: 1015PEM
[ 393.984672] tx refused but queue active
[ 393.987701] Modules linked in: arc4 ecb brcm80211 netconsole configfs sco bnep l2cap bluetooth cpufreq_ondemand acpi_cpufreq freq_table mperf ip6t_REJECT nf_conntrack_ipv6 ip6table_filter ip6_tables uinput snd_hda_codec_realtek snd_hda_intel uvcvideo microcode snd_hda_codec mac80211 videodev snd_hwdep v4l1_compat snd_seq v4l2_compat_ioctl32 eeepc_wmi snd_seq_device sparse_keymap snd_pcm cfg80211 atl1c joydev rfkill snd_timer snd soundcore snd_page_alloc shpchp wmi ipv6 cryptd aes_x86_64 aes_generic xts gf128mul dm_crypt i915 drm_kms_helper drm i2c_algo_bit i2c_core video output [last unloaded: scsi_wait_scan]
[ 394.011827] Pid: 52, comm: kworker/u:2 Not tainted 2.6.36-0.34.rc6.git3.fc15.x86_64 #1
[ 394.015619] Call Trace:
[ 394.018946] [<ffffffff810511dc>] warn_slowpath_common+0x85/0x9d
[ 394.022272] [<ffffffff81051297>] warn_slowpath_fmt+0x46/0x48
[ 394.025541] [<ffffffffa0280563>] ieee80211_tx+0x1f2/0x225 [mac80211]
[ 394.030437] [<ffffffffa0280705>] ieee80211_xmit+0x16f/0x183 [mac80211]
[ 394.034881] [<ffffffff8104ae42>] ? get_parent_ip+0x11/0x41
[ 394.039746] [<ffffffffa02817bd>] ? ieee80211_tx_skb+0x42/0x59 [mac80211]
[ 394.044249] [<ffffffffa02817bd>] ? ieee80211_tx_skb+0x42/0x59 [mac80211]
[ 394.049202] [<ffffffffa02817ca>] ieee80211_tx_skb+0x4f/0x59 [mac80211]
[ 394.053710] [<ffffffffa0283fec>] ieee80211_send_probe_req+0xd4/0xeb [mac80211]
[ 394.058858] [<ffffffffa026e283>] ieee80211_scan_work+0x383/0x441 [mac80211]
[ 394.063561] [<ffffffff81067bfb>] process_one_work+0x1ee/0x355
[ 394.068896] [<ffffffff81067b6d>] ? process_one_work+0x160/0x355
[ 394.074173] [<ffffffff8107db9e>] ? lock_acquired+0x1fd/0x20c
[ 394.079432] [<ffffffffa026df00>] ? ieee80211_scan_work+0x0/0x441 [mac80211]
[ 394.084514] [<ffffffff81068ce0>] worker_thread+0x104/0x19b
[ 394.090828] [<ffffffff81068bdc>] ? worker_thread+0x0/0x19b
[ 394.095863] [<ffffffff8106c63c>] kthread+0x9d/0xa5
[ 394.099364] [<ffffffff8100ab64>] kernel_thread_helper+0x4/0x10
[ 394.102983] [<ffffffff8149e850>] ? restore_args+0x0/0x30
[ 394.106437] [<ffffffff8106c59f>] ? kthread+0x0/0xa5
[ 394.112118] [<ffffffff8100ab60>] ? kernel_thread_helper+0x0/0x10
[ 394.117614] ---[ end trace fb5725ec65dccb06 ]---
[ 394.183446] ------------[ cut here ]------------
[ 394.187555] WARNING: at net/mac80211/tx.c:1464 ieee80211_tx+0x1f2/0x225 [mac80211]()
[ 394.191822] Hardware name: 1015PEM
[ 394.196254] tx refused but queue active
[ 394.200583] Modules linked in: arc4 ecb brcm80211 netconsole configfs sco bnep l2cap bluetooth cpufreq_ondemand acpi_cpufreq freq_table mperf ip6t_REJECT nf_conntrack_ipv6 ip6table_filter ip6_tables uinput snd_hda_codec_realtek snd_hda_intel uvcvideo microcode snd_hda_codec mac80211 videodev snd_hwdep v4l1_compat snd_seq v4l2_compat_ioctl32 eeepc_wmi snd_seq_device sparse_keymap snd_pcm cfg80211 atl1c joydev rfkill snd_timer snd soundcore snd_page_alloc shpchp wmi ipv6 cryptd aes_x86_64 aes_generic xts gf128mul dm_crypt i915 drm_kms_helper drm i2c_algo_bit i2c_core video output [last unloaded: scsi_wait_scan]
[ 394.239443] Pid: 52, comm: kworker/u:2 Tainted: G W 2.6.36-0.34.rc6.git3.fc15.x86_64 #1
[ 394.245500] Call Trace:
[ 394.251604] [<ffffffff810511dc>] warn_slowpath_common+0x85/0x9d
[ 394.257231] [<ffffffff81051297>] warn_slowpath_fmt+0x46/0x48
[ 394.263143] [<ffffffffa0280563>] ieee80211_tx+0x1f2/0x225 [mac80211]
[ 394.268589] [<ffffffffa0280705>] ieee80211_xmit+0x16f/0x183 [mac80211]
[ 394.274316] [<ffffffff8104ae42>] ? get_parent_ip+0x11/0x41
[ 394.279961] [<ffffffffa02817bd>] ? ieee80211_tx_skb+0x42/0x59 [mac80211]
[ 394.285447] [<ffffffffa02817bd>] ? ieee80211_tx_skb+0x42/0x59 [mac80211]
[ 394.291381] [<ffffffffa02817ca>] ieee80211_tx_skb+0x4f/0x59 [mac80211]
[ 394.296799] [<ffffffffa0283fec>] ieee80211_send_probe_req+0xd4/0xeb [mac80211]
[ 394.302638] [<ffffffffa026e283>] ieee80211_scan_work+0x383/0x441 [mac80211]
[ 394.308380] [<ffffffff81067bfb>] process_one_work+0x1ee/0x355
[ 394.314005] [<ffffffff81067b6d>] ? process_one_work+0x160/0x355
[ 394.319681] [<ffffffff8107db9e>] ? lock_acquired+0x1fd/0x20c
[ 394.325185] [<ffffffffa026df00>] ? ieee80211_scan_work+0x0/0x441 [mac80211]
[ 394.331011] [<ffffffff81068ce0>] worker_thread+0x104/0x19b
[ 394.336679] [<ffffffff81068bdc>] ? worker_thread+0x0/0x19b
[ 394.342100] [<ffffffff8106c63c>] kthread+0x9d/0xa5
[ 394.347845] [<ffffffff8100ab64>] kernel_thread_helper+0x4/0x10
[ 394.353409] [<ffffffff8149e850>] ? restore_args+0x0/0x30
[ 394.358774] [<ffffffff8106c59f>] ? kthread+0x0/0xa5
[ 394.364528] [<ffffffff8100ab60>] ? kernel_thread_helper+0x0/0x10
[ 394.370185] ---[ end trace fb5725ec65dccb07 ]---
[ 394.436596] ------------[ cut here ]------------
[ 394.441966] WARNING: at net/mac80211/tx.c:1464 ieee80211_tx+0x1f2/0x225 [mac80211]()
[ 394.447790] Hardware name: 1015PEM
[ 394.453188] tx refused but queue active
[ 394.458810] Modules linked in: arc4 ecb brcm80211 netconsole configfs sco bnep l2cap bluetooth cpufreq_ondemand acpi_cpufreq freq_table mperf ip6t_REJECT nf_conntrack_ipv6 ip6table_filter ip6_tables uinput snd_hda_codec_realtek snd_hda_intel uvcvideo microcode snd_hda_codec mac80211 videodev snd_hwdep v4l1_compat snd_seq v4l2_compat_ioctl32 eeepc_wmi snd_seq_device sparse_keymap snd_pcm cfg80211 atl1c joydev rfkill snd_timer snd soundcore snd_page_alloc shpchp wmi ipv6 cryptd aes_x86_64 aes_generic xts gf128mul dm_crypt i915 drm_kms_helper drm i2c_algo_bit i2c_core video output [last unloaded: scsi_wait_scan]
[ 394.497956] Pid: 52, comm: kworker/u:2 Tainted: G W 2.6.36-0.34.rc6.git3.fc15.x86_64 #1
[ 394.503916] Call Trace:
[ 394.509699] [<ffffffff810511dc>] warn_slowpath_common+0x85/0x9d
[ 394.515231] [<ffffffff81051297>] warn_slowpath_fmt+0x46/0x48
[ 394.520826] [<ffffffffa0280563>] ieee80211_tx+0x1f2/0x225 [mac80211]
[ 394.526228] [<ffffffffa0280705>] ieee80211_xmit+0x16f/0x183 [mac80211]
[ 394.531645] [<ffffffff8104ae42>] ? get_parent_ip+0x11/0x41
[ 394.537029] [<ffffffffa02817bd>] ? ieee80211_tx_skb+0x42/0x59 [mac80211]
[ 394.542575] [<ffffffffa02817bd>] ? ieee80211_tx_skb+0x42/0x59 [mac80211]
[ 394.547913] [<ffffffffa02817ca>] ieee80211_tx_skb+0x4f/0x59 [mac80211]
[ 394.553395] [<ffffffffa0283fec>] ieee80211_send_probe_req+0xd4/0xeb [mac80211]
[ 394.558713] [<ffffffffa026e283>] ieee80211_scan_work+0x383/0x441 [mac80211]
[ 394.564177] [<ffffffff81067bfb>] process_one_work+0x1ee/0x355
[ 394.569633] [<ffffffff81067b6d>] ? process_one_work+0x160/0x355
[ 394.575097] [<ffffffff8107db9e>] ? lock_acquired+0x1fd/0x20c
[ 394.580602] [<ffffffffa026df00>] ? ieee80211_scan_work+0x0/0x441 [mac80211]
[ 394.585902] [<ffffffff81068ce0>] worker_thread+0x104/0x19b
[ 394.591438] [<ffffffff81068bdc>] ? worker_thread+0x0/0x19b
[ 394.596747] [<ffffffff8106c63c>] kthread+0x9d/0xa5
[ 394.602178] [<ffffffff8100ab64>] kernel_thread_helper+0x4/0x10
[ 394.607425] [<ffffffff8149e850>] ? restore_args+0x0/0x30
[ 394.612798] [<ffffffff8106c59f>] ? kthread+0x0/0xa5
[ 394.618105] [<ffffffff8100ab60>] ? kernel_thread_helper+0x0/0x10
[ 394.623491] ---[ end trace fb5725ec65dccb08 ]---
[ 394.630148] wl0: wlc_bmac_xtal: want 1
next reply other threads:[~2010-10-08 7:23 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-08 6:58 Jon Masters [this message]
2010-10-08 11:44 ` PROBLEM: brcm80211 hangs on 2.6.36-0.34.rc6.git3.fc15.x86_64 Jon Masters
2010-10-08 17:45 ` Brett Rudley
2010-10-08 17:45 ` Brett Rudley
2010-10-11 20:12 ` Jon Masters
2010-10-11 21:01 ` Brett Rudley
2010-10-12 2:22 ` Jon Masters
2010-10-12 7:47 ` Jon Masters
2010-10-12 8:03 ` Jon Masters
2010-10-12 8:11 ` PROBLEM: brcm80211 hangs on 2.6.36-0.34.rc6.git3.fc15.x86_64 [FIXED] Jon Masters
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101008065810.GA1680@constitution.bos.jonmasters.org \
--to=jonathan@jonmasters.org \
--cc=brudley@broadcom.com \
--cc=henryp@broadcom.com \
--cc=jcm@jonmasters.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=noheek@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.